ISO 12215-6:2008
Current
Current
The latest, up-to-date edition.
Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
20-03-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 12215-6:2008 concerns structural details and structural components not explicitly included in ISO 12215-5, ISO 12215-7, ISO 12215-8 and ISO 12215-9. It applies to monohull and multihull small craft constructed from fibre reinforced plastics (FRP), aluminium or steel alloys, wood or other suitable boat building material, with a hull length, in accordance with ISO 8666, of up to 24 m.
ISO 12215-6:2008 fulfils two functions. Firstly, it supports ISO 12215-5 by providing further explanations and calculation procedures and formulae. Secondly, it gives a number of examples of arrangements and structural details which illustrate principles of good practice. These principles provide a standard against which alternative arrangements and structural details can be benchmarked, using the equivalence criteria specified in ISO 12215-6:2008.
| DevelopmentNote |
Supersedes ISO/DIS 12215-6. (03/2008)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN ISO 12215-6:2008 | Identical |
| NEN EN ISO 12215-6 : 2008 | Identical |
| EN ISO 12215-6:2018 | Identical |
| NF EN ISO 12215-6:2018 | Identical |
| SAC GB/T 19314.6 : 2019 | Identical |
| ÖNORM EN ISO 12215-6: 2019 04 15 | Identical |
| PN-EN ISO 12215-6:2018-12/Ap1:2022-09 | Identical |
| UNI EN ISO 12215-6 : 2008 | Identical |
| SN EN ISO 12215-6 : 2008 | Identical |
| DIN EN ISO 12215-6:2008-07 | Identical |
| SN EN ISO 12215-6:2019 | Identical |
| BS EN ISO 12215-6:2008 | Identical |
| EN ISO 12215-6:2008 | Identical |
| NS EN ISO 12215-6 : 1ED 2008 | Identical |
| I.S. EN ISO 12215-6:2008 | Identical |
| UNE-EN ISO 12215-6:2019 | Identical |
| JIS F 1034-6:2020 | Identical |
| NF EN ISO 12215-6 : 2008 | Identical |
| PN EN ISO 12215-6 : 2009 | Identical |
| NBN EN ISO 12215-6 : 2008 | Identical |
| DIN EN ISO 12215-6:2019-05 | Identical |
| ONORM EN ISO 12215-6 : 2008 | Identical |
| BS EN ISO 12215-6:2018 | Identical |
| NS-EN ISO 12215-6:2018 | Identical |
| PN-EN ISO 12215-6:2018-12 | Identical |
| DIN EN ISO 12215-6:2020-05 | Identical |
| UNI EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| ONORM EN ISO 6185-4 : 2015 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| BS EN ISO 21487 : 2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| UNE-EN ISO 12215-9:2013 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
| I.S. EN ISO 12215-9:2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| UNI EN ISO 12215-9 : 2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES |
| BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| DIN EN ISO 12215-5:2014-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| BS EN ISO 12215-5 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| UNE-EN ISO 12215-5:2008 | Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
| DIN EN ISO 21487:2016-05 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012 + AMD 1:2014 + AMD 2:2015) |
| BS EN ISO 12215-9:2012 | Small craft. Hull construction and scantlings Sailing craft appendages |
| DIN EN ISO 12215-9:2013-01 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| ONORM EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| I.S. EN ISO 12215-5:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008) |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| ISO 21487:2012 | Small craft — Permanently installed petrol and diesel fuel tanks |
| UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| 13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
| 17/30366966 DC : 0 | BS EN ISO 12215-7 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 7: SCANTLINGS DETERMINATION OF MULTIHULLS |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| EN ISO 12215-9:2012 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| UNE-EN ISO 21487:2013 | Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| I.S. EN ISO 21487:2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012) |
| 2003/44/EC : 2003 COR 1 2006 | DIRECTIVE 2003/44/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 2003 AMENDING DIRECTIVE 94/25/EC ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
| ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
| ISO 9692-4:2003 | Welding and allied processes — Recommendations for joint preparation — Part 4: Clad steels |
| ISO 6520-1:2007 | Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding |
| ISO 13920:1996 | Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
| ISO 12215-8:2009 | Small craft — Hull construction and scantlings — Part 8: Rudders |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 8666:2016 | Small craft Principal data |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 9692-1:2013 | Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
| ISO 12215-3:2002 | Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials |
| ISO 9692-3:2016 | Welding and allied processes Types of joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 6520-2:2013 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure |
| ISO 9692-2:1998 | Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
| ISO 12216:2002 | Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.