ISO 1219-1:2012
Current
Current
The latest, up-to-date edition.
Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
21-05-2012
ISO 1219-1:2012 establishes basic elements for symbols. It specifies rules for devising fluid power symbols for use on components and in circuit diagrams.
ISO 1219-1:2012 is a collective application standard of the ISO 14617 series. In ISO 1219-1:2012, the symbols are designed in fixed dimensions to be used directly in data processing systems, which might result in different variants.
| DevelopmentNote |
Supersedes ISO 1219 (04/2001) Supersedes NFPA T3.10.18 (09/2004) Supersedes NFPA T3.10.4 (04/2008) Supersedes ISO/DIS 1219-1. (05/2012)
|
| DocumentType |
Standard
|
| Pages |
178
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS ISO 1219-1 : 2012 | Identical |
| BS ISO 1219-1 : 2012 | Identical |
| SS-ISO 1219-1 : 2012 | Identical |
| NF ISO 1219-1 : 2012 | Identical |
| IS 7513 : Part 1 : 2019 | Identical |
| DIN ISO 1219-1:2007-12 | Identical |
| BS ISO 1219-1:2012+A1:2016 | Identical |
| DIN ISO 1219:1978-08 | Corresponds |
| NBN ISO 1219 1 : 1993 | Identical |
| SNV ISO 1219-1 : 1991 | Identical |
| UNI ISO 1219-1 : 1994 | Identical |
| NEN ISO 1219-1 : 2006 | Identical |
| 11/30251717 DC : 0 | BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| UNE-EN ISO 4414:2011 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| BS ISO 4392-1:2002 | Hydraulic fluid power. Determination of characteristics of motors At constant low speed and constant pressure |
| BS 7403-12:2000 | Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity |
| BS EN 81-31:2010 | Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts |
| ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings |
| I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 13/30250817 DC : 0 | BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS |
| ISO 7789:2007 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities |
| ISO/TS 22595-1:2006 | Dentistry Plant area equipment Part 1: Suction systems |
| BS ISO 5599-2:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector |
| BIS IS 8384 : 2013 | HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| 08/30176286 DC : DRAFT JAN 2008 | BS ISO 6358-3 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 3: DISCHARGE TEST AS AN ALTERNATE TEST METHOD |
| BS ISO 16908:2014 | Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation |
| 13/30258990 DC : 0 | BS ISO 16908 - HYDRAULIC FILTER ELEMENT TEST METHODS - THERMAL CONDITIONING AND COLD START-UP SIMULATION |
| NFPA T3.21.3 : 2008 : R2013 | PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS |
| BS ISO 11011 : 2013 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT |
| BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| BS 7403-11:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for self-cleaning filters |
| 08/30176283 DC : DRAFT JAN 2008 | BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES |
| BS 7403-1:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for differential pressure/flow characteristics |
| 13/30271038 DC : 0 | BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| 14/30280597 DC : 0 | BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS |
| BS ISO 10770-3:2007 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for pressure control valves |
| BS ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity |
| I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| NFPA T3.21.8 : 2008 : R2013 | PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES |
| 00/716569 DC : DRAFT NOV 2000 | PREN 1804-3 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| 09/30196757 DC : 0 | BS ISO 10041-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINATE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES |
| 05/30075032 DC : DRAFT AUG 2005 | ISO 23181 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING HIGH VISCOSITY FLUID |
| MIL-STD-3001-1 Revision A:2014 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
| BS ISO 13357-2:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils |
| SAE J2311_201503 | Automatic Transmission Hydraulic Pump Test Procedure |
| UNE-EN ISO 4413:2011 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| NFPA T3.21.8 : 2008 | PNEUMATIC FLUID POWER - MEASUREMENT OF RESPONSE TIME - DIRECTIONAL CONTROL VALVES |
| EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| ISO 10770-2:2012 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves |
| ISO 4548-11:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 11: Self-cleaning filters |
| ISO 14617-1:2005 | Graphical symbols for diagrams Part 1: General information and indexes |
| BS EN ISO 4414:2010 | Pneumatic fluid power. General rules and safety requirements for systems and their components |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| UNI 10411-2 : 2014 | MODIFICATION OF HYDRAULIC LIFTS NOT COMPLYING WITH DIRECTIVE 95/16/EC |
| ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
| BS ISO 6358-2:2013 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Alternative test methods |
| ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
| ISO 15086-3:2008 | Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance |
| UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| DIN EN 1804-3:2010-05 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems (includes Amendment A1:2010) |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| BS ISO 27407:2010 | Hydraulic fluid power. Marking of performance characteristics on hydraulic filters |
| 17/30356606 DC : 0 | BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS |
| BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
| I.S. EN 13443-2:2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 [MU]M TO LESS THAN 80 [MU]M - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
| DIN ISO 12238:2005-12 | Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001) |
| DIN EN 81-2:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN 13443-2:2005+A1:2007 | Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing |
| DIN EN 982:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| BS ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test for composite filter housings |
| BS 7403-9:1995 | Full-flow lubricating oil filters for internal combustion engines Method of test for inlet and outlet anti-drain valves |
| 04/30022943 DC : DRAFT NOV 2004 | BS ISO 12500-2 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 2: OIL VAPOURS |
| ISO/TS 13353:2002 | Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting |
| BS 7403-4:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
| BS ISO 14085-4:2015 | Aerospace series. Hydraulic filter elements. Test methods Verification of collapse/burst pressure rating |
| ISO 8573-8:2004 | Compressed air — Part 8: Test methods for solid particle content by mass concentration |
| 00/707842 DC : DRAFT APR 2000 | ISO/CD 17559 - HYDRAULIC FLUID POWER - TEST METHOD FOR ELECTRICITY CONTROLLED OIL HYDRAULIC PUMPS |
| ISO 4409:2007 | Hydraulic fluid power Positive-displacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance |
| BS ISO 15407-2:2003 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector |
| ISO/TS 16332:2006 | Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency |
| BS ISO 11727:1999 | Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components |
| 11/30182572 DC : 0 | BS ISO 11011 - COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT |
| BS ISO 19973-2:2015 | Pneumatic fluid power. Assessment of component reliability by testing Directional control valves |
| BS ISO 2941:2009 | Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating |
| BS ISO 15086-2:2000 | Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems Measurement of speed of sound in a fluid in a pipe |
| BS ISO 8426:2008 | Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity |
| ISO 16908:2014 | Hydraulic filter element test methods — Thermal conditioning and cold start-up simulation |
| BS ISO 4548-9:2008 | Methods of test for full-flow lubricating oil filters for internal combustion engines Inlet and outlet anti-drain valve tests |
| ISO 12500-2:2007 | Filters for compressed air — Test methods — Part 2: Oil vapours |
| 08/30186852 DC : DRAFT JULY 2008 | BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| BS 7403-2:1998 | Full-flow lubricating oil filters for internal combustion engines Method of test for element by-pass valve characteristics |
| BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
| BS ISO 10767-3:1999 | Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Method for motors |
| BS ISO 14085-5:2015 | Aerospace series. Hydraulic filter elements. Test methods Resistance to flow fatigue |
| ISO 6358-2:2013 | Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 2: Alternative test methods |
| BS ISO 1219-2:2012 | Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams |
| BS EN ISO 11011:2015 | Compressed air. Energy efficiency. Assessment |
| BS ISO 7183:2007 | Compressed-air dryers. Specifications and testing |
| NF ISO 12500-3 : 2009 | FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
| 08/30168462 DC : DRAFT APR 2008 | BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST |
| BS ISO 8573-8:2004 | Compressed air Test methods for solid particle content by mass concentration |
| NFPA T3.21.3 : 2008 | PNEUMATIC FLUID POWER - FLOW RATING TEST PROCEDURE AND REPORTING METHOD - FOR FIXED ORIFICE COMPONENTS |
| BS ISO 17559:2003 | Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics |
| 05/30125047 DC : DRAFT JAN 2005 | ISO 19973-3 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 3: PISTON ROD CYLINDERS |
| 18/30358591 DC : 0 | BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| DIN EN ISO 4414:2011-04 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| I.S. EN ISO 6412-1:2018 | TECHNICAL PRODUCT DOCUMENTATION - SIMPLIFIED REPRESENTATION OF PIPELINES - PART 1: GENERAL RULES AND ORTHOGONAL REPRESENTATION (ISO 6412-1:2017) |
| UNI ISO 5598 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
| SAE J747_201711 | Control Valve Test Procedure |
| BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
| DIN ISO 1219-2:1996-11 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| ISO 3968:2017 | Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
| ISO 1219-3:2016 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams |
| ISO 2942:2004 | Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point |
| ISO 20401:2017 | Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| ISO 7183:2007 | Compressed-air dryers Specifications and testing |
| NF EN 1804-3 : 2006 + A1 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| BS ISO 17082:2004 | Pneumatic fluid power. Valves. Data to be included in supplier literature |
| BS EN 13443-2 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MICROMETER TO LESS THAN 80 MICROMETER - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| 08/30170008 DC : DRAFT SEP 2008 | BS ISO 27407 - HYDRAULIC FLUID POWER - MARKING OF PERFORMANCE CHARACTERISTICS ON HYDRAULIC FILTERS |
| UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
| UNI EN 1804-3 : 2010 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| I.S. EN 1804-3:2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| I.S. EN 14652:2006 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| I.S. EN ISO 128-20:2002 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 20: BASIC CONVENTIONS FOR LINES |
| I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| DIN EN 15339-2:2007-06 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| EN 1804-3:2006+A1:2010 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
| I.S. EN 81-3:2000 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| I.S. EN 81-2:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| ANSI B11 TR6 : 2010 | MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS |
| ISO 4548-1:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 1: Differential pressure/flow characteristics |
| DIN EN ISO 4413:2011-04 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| NF EN ISO 4414 : 2011 | PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| 03/319909 DC : DRAFT NOV 2003 | BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS |
| 16/30330392 DC : 0 | BS ISO 20401 - PNEUMATIC FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM |
| 13/30271041 DC : 0 | BS ISO 14085-5 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 5: RESISTANCE TO FLOW FATIGUE |
| 17/30362085 DC : 0 | BS ISO 14617 - GRAPHICAL SYMBOLS FOR DIAGRAMS |
| BS ISO 8643:2017 | Earth-moving machinery. Hydraulic excavator and backhoe loader lowering control device. Requirements and tests |
| BS ISO 7789:2007 | Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
| 13/30294749 DC : 0 | BS ISO 19973-2 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 2: DIRECTIONAL CONTROL VALVES |
| I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| BS ISO 10770-2:2012 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for three-port directional flow-control valves |
| BS ISO 19973-3:2015 | Pneumatic fluid power. Assessment of component reliability by testing Cylinders with piston rod |
| BS ISO 4020:2001 | Road vehicles. Fuel filters for diesel engines.Test methods |
| BS ISO 10094-2:2010 | Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics to include in the supplier\'s literature |
| 14/30304019 DC : 0 | BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
| BS ISO 12500-3:2009 | Filters for compressed air. Test methods Particulates |
| BS ISO 10041-2:2010 | Pneumatic fluid power. Electro-pneumatic continuous flow control valves Test methods to determine main characteristics to include in the supplier\'s literature |
| UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| BS ISO 6263:2013 | Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
| 16/30317112 DC : 0 | BS ISO 3968 - HYDRAULIC FLUID POWER - FILTERS - EVALUATION OF DIFFERENTIAL PRESSURE VERSUS FLOW |
| FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
| BS ISO 5598:2008 | Fluid power systems and components. Vocabulary |
| BS ISO 19973-4:2014 | Pneumatic fluid power. Assessment of component reliability by testing Pressure regulators |
| 15/30271100 DC : 0 | BS ISO 16332 - DIESEL ENGINES - FUEL FILTERS - METHOD FOR EVALUATING FUEL/ WATER SEPARATION EFFICIENCY |
| 04/30108990 DC : DRAFT FEB 2004 | ISO 17567 - AGRICULTURE AND FORESTRY TRACTORS AND IMPLEMENTS - HYDRAULIC POWER BEYOND |
| BS ISO 4392-2:2002 | Hydraulic fluid power. Determination of characteristics of motors Startability |
| 97/711340 DC : DRAFT JUL 1997 | ISO/CD 5598 - FLUID POWER SYSTEMS - TERMINOLOGY, CLASSIFICATION AND SYMBOLS |
| MIL-STD-40051-2 Revision C:2015 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR PAGE-BASED TECHNICAL MANUALS (TMS) |
| BS ISO 14085-2:2015 | Aerospace series. Hydraulic filter elements. Test methods Conditioning |
| BS ISO 20401:2017 | Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
| 14/30292494 DC : 0 | BS EN ISO 22476-15 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 15: MEASURING WHILE DRILLING |
| ISO 15407-2:2003 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector |
| BS 7403-3:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for resistance to high differential pressure and to elevated temperature |
| BS ISO 3968:2017 | Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow |
| ISO 6358-1:2013 | Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow |
| ISO 27407:2010 | Hydraulic fluid power Marking of performance characteristics on hydraulic filters |
| BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
| ISO 4548-9:2008 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti-drain valve tests |
| I.S. EN 15339-2:2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| ISO 6301-2:2006 | Pneumatic fluid power Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
| ISO 19973-4:2014 | Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators |
| EN ISO 6412-1:2018 | Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017) |
| UNI EN 81-31 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| UNE-EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| BS ISO 18413:2015 | Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| ISO 10770-3:2007 | Hydraulic fluid power Electrically modulated hydraulic control valves Part 3: Test methods for pressure control valves |
| ISO 19438:2003 | Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity |
| ISO 4548-4:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
| ISO 6953-2:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
| ISO 12500-1:2007 | Filters for compressed air Test methods Part 1: Oil aerosols |
| ISO 4392-2:2002 | Hydraulic fluid power Determination of characteristics of motors Part 2: Startability |
| ISO 10767-3:1999 | Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors |
| ISO 5781:2016 | Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
| ISO/TS 23556:2007 | Performance test method for diesel engine soot-removal devices in lubricating oils — Initial filtration efficiency |
| ISO 10770-1:2009 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves |
| DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| DIN EN 13443-2:2007-10 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 2: PARTICLE RATING 1 MUM TO LESS THAN 80 MUM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN ISO 9905 : 1998 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
| BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
| UNE-EN 81-2:2001 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS. |
| EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| UNI EN 81-3 : 2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| UNI EN 81-2 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| UNI EN ISO 9905 : 2011 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
| UNI EN 983 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| UNI EN 982 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| ISO 6263:2013 | Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
| BS ISO 6358-1:2013 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids General rules and test methods for steady-state flow |
| DIN EN ISO 11011:2015-08 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
| 13/30294752 DC : 0 | BS ISO 19973-3 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 3: CYLINDERS WITH PISTON ROD |
| BS ISO 14084-2:2015 | Process diagrams for power plants Graphical symbols |
| 13/30209314 DC : 0 | BS ISO 14084-2 - PROCESS DIAGRAMS FOR POWER PLANTS - PART 2: GRAPHICAL SYMBOLS |
| I.S. EN ISO 5199:2002 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
| 04/30022935 DC : DRAFT NOV 2004 | BS ISO 12500-1 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 1: OIL AEROSOILS |
| 13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
| 13/30271032 DC : 0 | BS ISO 14085-2 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 2: CONDITIONING |
| 17/30325994 DC : 0 | BS ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE-DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE |
| BS ISO 8573-9:2004 | Compressed air Test methods for liquid water content |
| 05/30128814 DC : DRAFT NOV 2005 | ISO 19973-4 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 4: PRESSURE REGULATORS |
| I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| BS ISO 2942:2004 | Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point |
| BS ISO 5782-1:2017 | Pneumatic fluid power. Compressed air filters Main characteristics to be included in supplier\'s literature and product-marking requirements |
| BS ISO 12500-1:2007 | Filters for compressed air. Test methods Oil aerosols |
| BS ISO 10770-1:2009 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for four-port directional flow-control valves |
| BS ISO 12238:2001 | Pneumatic fluid power. Directional control valves. Measurement of shifting time |
| BS ISO 13357-1:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for oils in the presence of water |
| BS ISO 6953-2:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics to be included in literature from suppliers |
| 00/704298 DC : DRAFT FEB 2000 | ISO/CD 2941 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
| 09/30196676 DC : DRAFT OCT 2009 | BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| 15/30316146 DC : 0 | BS ISO 13357-1 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
| DIN ISO 13357-1:2009-04 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
| 11/30240403 DC : 0 | BS ISO 10770-2 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 2: TEST METHODS FOR THREE-WAY DIRECTIONAL FLOW CONTROL VALVES |
| 02/710642 DC : DRAFT SEP 2002 | BS ISO 2942 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY AND DETERMINATION OF THE FIRST BUBBLE POINT |
| ISO 4548-3:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 3: Resistance to high differential pressure and to elevated temperature |
| 02/707919 DC : DRAFT JUN 2002 | BS ISO 8573-8 - COMPRESSED AIR - PART 8: TEST METHODS FOR SOLID PARTICLE CONTENT BY MASS CONCENTRATION |
| 09/30196686 DC : 0 | BS ISO 10094-2 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| 02/708160 DC : DRAFT JUN 2002 | BS ISO 8573-9 - COMPRESSED AIR - PART 9: TEST METHODS FOR LIQUID WATER CONTENT |
| BS ISO 6264:1998 | Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
| BS ISO 8573-6:2003 | Compressed air Test methods for gaseous contaminant content |
| 16/30316730 DC : 0 | BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY |
| 07/30164305 DC : 0 | BS ISO 12500-3 - FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 3: PARTICULATES |
| BS EN ISO 23125:2015 | Machine tools. Safety. Turning machines |
| BS ISO 4413:1998 | Hydraulic fluid power. General rules relating to systems |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| ISO 8573-9:2004 | Compressed air — Part 9: Test methods for liquid water content |
| NF ISO 10770-1 : 2009 | HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-PORT DIRECTIONAL FLOW-CONTROL VALVES |
| NF EN 81-31 : 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| DIN EN 81-31:2010-08 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| 07/30163925 DC : 0 | BS ISO 4411 - HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| NF ISO 10041-2 : 2010 | PNEUMATIC FLUID POWER - ELECTRO-PNEUMATIC CONTINUOUS FLOW CONTROL VALVES - PART 2: TEST METHODS TO DETERMINE MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| UNI ISO 4411 : 2012 | HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| ISO 10637:1999 | Dental equipment High- and medium-volume suction systems |
| BS ISO 1219-3:2016 | Fluid power systems and components. Graphical symbols and circuit diagrams Symbol modules and connected symbols in circuit diagrams |
| ISO 12500-3:2009 | Filters for compressed air Test methods Part 3: Particulates |
| ISO 5599-2:2001 | Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector |
| ISO 19973-3:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod |
| ISO 8426:2008 | Hydraulic fluid power Positive displacement pumps and motors Determination of derived capacity |
| S.R. CWA 16221:2010 | VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION |
| ISO 2941:2009 | Hydraulic fluid power — Filter elements — Verification of collapse/burst pressure rating |
| I.S. EN ISO 11011:2015 | COMPRESSED AIR - ENERGY EFFICIENCY - ASSESSMENT (ISO 11011:2013) |
| BS ISO 4409:2007 | Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance |
| SAE J2312_201305 | Automatic Transmission Intake Filter Test Procedure |
| ISO 6412-1:2017 | Technical product documentation — Simplified representation of pipelines — Part 1: General rules and orthogonal representation |
| ISO 4392-1:2002 | Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure |
| ISO 17559:2003 | Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics |
| ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
| ISO 19973-2:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves |
| ISO 19973-5:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| ISO 4548-2:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 2: Element by-pass valve characteristics |
| ISO 23181:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using high viscosity fluid |
| ISO 10041-2:2010 | Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| I.S. EN 81-31:2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
| ISO 14085-5:2015 | Aerospace series Hydraulic filter elements Test methods Part 5: Resistance to flow fatigue |
| ISO 4411:2008 | Hydraulic fluid power Valves Determination of pressure differential/flow characteristics |
| ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
| 14/30302919 DC : 0 | PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS |
| BS EN ISO 128-20:2001 | Technical drawings. General principles of presentation Basic conventions for lines |
| BS EN 1804-3 : 2006 | MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS |
| ISO 10767-2:1999 | Hydraulic fluid power Determination of pressure ripple levels generated in systems and components Part 2: Simplified method for pumps |
| BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| ISO 8230:1997 | Safety requirements for dry-cleaning machines using perchloroethylene |
| ONORM EN 81-20 : 2015 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| BS EN 982 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS |
| BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment Gas control units |
| BS EN 81-2 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| BS EN 14652 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| ISO 11011:2013 | Compressed air — Energy efficiency — Assessment |
| ISO 23125:2015 | Machine tools — Safety — Turning machines |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 5199:2002 | Technical specifications for centrifugal pumps — Class II |
| BS EN 983 : 1996 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
| BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
| ISO 9905:1994 | Technical specifications for centrifugal pumps — Class I |
| BS ISO 10767-2:1999 | Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components Simplified method for pumps |
| BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
| EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
| EN 14652:2005+A1:2007 | Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing |
| EN 81-31:2010 | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
| EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN ISO 5199:2002 | Technical specifications for centrifugal pumps - Class II (ISO 5199:2002) |
| EN ISO 128-20:2001 | Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| EN ISO 8230 : 1997 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| EN ISO 11011:2015 | Compressed air - Energy efficiency - Assessment (ISO 11011:2013) |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| BS ISO 5781:2000 | Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
| 15/30321906 DC : 0 | BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
| BS ISO 6953-3:2013 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
| 15/30316149 DC : 0 | BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL |
| BS ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines Cold start simulation and hydraulic pulse durability for composite filter housings |
| 05/30125044 DC : DRAFT JAN 2005 | ISO 19973-2 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 2: VALVES |
| BS ISO 4411:2008 | Hydraulic fluid power. Valves. Determination of pressure differential/flow characteristics |
| BS ISO 18237:2017 | Hydraulic fluid power. Method for evaluating water separation performance of dehydrators |
| ISO 12238:2001 | Pneumatic fluid power — Directional control valves — Measurement of shifting time |
| NFPA T3.5.14 : 2009 : R2014 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| I.S. EN ISO 8230:1998 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| BS ISO 14617-1:2002 | Graphical symbols for diagrams General information and indexes |
| MIL-STD-40051-1 Revision C:2015 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR INTERACTIVE ELECTRONIC TECHNICAL MANUALS (IETMS) |
| BS ISO 17567:2005 | Agriculture and forestry tractors and implements. Hydraulic power beyond |
| BS ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
| BIS IS 11509-1 : 2012 | METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 1: DIFFERENTIAL PRESSURE/FLOW CHARACTERISTICS |
| 06/30128779 DC : DRAFT AUG 2006 | ISO 8426 - HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS - DETERMINATION OF DERIVED CAPACITY |
| ISO 14084-2:2015 | Process diagrams for power plants Part 2: Graphical symbols |
| BS ISO 12500-2:2007 | Filters for compressed air. Test methods Oil vapours |
| 05/30111949 DC : DRAFT JUL 2005 | ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE |
| BS ISO 11943:1999 | Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation |
| 16/30268528 DC : 0 | BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS |
| BS EN ISO 4413:2010 | Hydraulic fluid power. General rules and safety requirements for systems and their components |
| BS ISO 4414:1998 | Pneumatic fluid power. General rules relating to systems |
| DIN ISO 13357-2:2008-09 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS |
| BS ISO 19973-5:2015 | Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| 98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
| BIS IS 13534 : 2013 | HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS |
| ISO 6953-3:2012 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators |
| ISO 15086-2:2000 | Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe |
| BS ISO 5599-1:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector |
| DD ISO/TS 23556:2007 | Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency |
| 08/30176290 DC : DRAFT JAN 2008 | BS ISO 6358-4 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 4: CHARGE TEST AS AN ALTERNATE TEST METHOD |
| BS ISO 23181:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid |
| ISO 8643:2017 | Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests |
| ISO 14085-2:2015 | Aerospace series Hydraulic filter elements Test methods Part 2: Conditioning |
| 06/30128759 DC : 0 | BS ISO 15086-3 - HYDRAULIC FLUID POWER - DETERMINATION OF THE FLUID-BORNE NOISE CHARACTERISTICS OF COMPONENTS AND SYSTEMS - PART 3: MEASUREMENT OF HYDRAULIC IMPEDANCE |
| 08/30171024 DC : DRAFT MAY 2008 | BS ISO 10770-1 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-WAY DIRECTIONAL FLOW CONTROL VALVES |
| 04/30115437 DC : 0 | ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
| DIN ISO 20401:2007-07 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005) |
| NF EN ISO 4413 : 2011 | HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| ISO 14085-3:2015 | Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity |
| ISO 12500-4:2009 | Filters for compressed air Methods of test Part 4: Water |
| I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| ISO 17567:2005 | Agricultural and forestry tractors and implements Hydraulic power beyond |
| ISO 16332:2018 | Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency |
| NFPA T3.5.14 : 2009 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings |
| ISO 5599-1:2001 | Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector |
| I.S. EN ISO 23125:2015 | MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015) |
| ISO 5782-1:2017 | Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
| ISO 18413:2015 | Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting |
| ISO 10094-2:2010 | Pneumatic fluid power Electro-pneumatic pressure control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| ISO 8573-6:2003 | Compressed air — Part 6: Test methods for gaseous contaminant content |
| ISO 14085-4:2015 | Aerospace series Hydraulic filter elements Test methods Part 4: Verification of collapse/burst pressure rating |
| DIN EN 81-3:2011-06 | Safety rules for the construction und installation of lifts - Part 3: Electric and hydraulic service lifts (includes Amendment A1:2008 + Corrigendum AC:2009) |
| ISO 17082:2004 | Pneumatic fluid power — Valves — Data to be included in supplier literature |
| ISO 128-20:1996 | Technical drawings General principles of presentation Part 20: Basic conventions for lines |
| BS EN 81-3 : 2003 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| BS EN ISO 5199:2002 | Technical specifications for centrifugal pumps. Class II |
| ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
| DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| DIN EN 14652:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| DIN EN ISO 5199:2003-12 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
| EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| DIN EN 983:1996-09 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| DIN EN 983:2009-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS |
| DIN EN 81-2:2010-08 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| NFPA T3.5.1 : 2002 | HYDRAULIC FLUID POWER - VALVES - MOUNTING SURFACES |
| NFPA T3.5.30 : 2008 : (R2018) | HYDRAULIC FLUID POWER - SOLENOID OPERATED DIRECTIONAL CONTROL VALVES - MEASUREMENT OF RESPONSE TIME |
| NFPA T3.5.1 : 2002 : R2010 | HYDRAULIC FLUID POWER - VALVES - MOUNTING SURFACES |
| NFPA T2.13.14 : 2007 : R2012 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - USE OF ENVIRONMENTALLY ACCEPTABLE FLUIDS |
| NFPA T2.13.14 : 2007 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - USE OF ENVIRONMENTALLY ACCEPTABLE FLUIDS |
| NFPA 750:2023 | Standard on Water Mist Fire Protection Systems |
| UNE-EN 1804-3:2007 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
| ISO 3511-3:1984 | Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams |
| ISO 9461:1992 | Hydraulic fluid power — Identification of valve ports, subplates, control devices and solenoids |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 3098-5:1997 | Technical product documentation — Lettering — Part 5: CAD lettering of the Latin alphabet, numerals and marks |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
| ISO 11727:1999 | Pneumatic fluid power Identification of ports and control mechanisms of control valves and other components |
| ISO 3511-2:1984 | Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements |
| IEC 81714-2:2006 | Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.