ISO 11890-1:2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
08-05-2024
Superseded by
Language(s)
English, French, Russian
Published date
26-06-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11890-1:2007 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.
It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part may be used where the expected VOC content is greater than 15 % by mass. When the expected VOC content is greater than 0,1 % by mass and less than 15 % by mass, ISO 11890-2 should be employed.
This method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds can be present and might need to be quantified by another suitable method and allowed for in the calculations.
| Committee |
ISO/TC 35/SC 16
|
| DevelopmentNote |
Supersedes ISO/DIS 11890-1. (06/2007)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| UNI EN ISO 11890-1:2001 | Identical |
| NF EN ISO 11890-1 : 2007 | Identical |
| NEN EN ISO 11890-1 : 2007 | Identical |
| I.S. EN ISO 11890-1:2007 | Identical |
| PN EN ISO 11890-1 : 2008 | Identical |
| SN EN ISO 11890-1:2007 | Identical |
| UNI EN ISO 11890-1 : 2008 | Identical |
| SS-EN ISO 11890-1:2007 | Identical |
| BIS IS 101-2-3 : 2015 | Identical |
| BS EN ISO 11890-1:2007 | Identical |
| UNE-EN ISO 11890-1:2007 | Identical |
| EN ISO 11890-1:2007 | Identical |
| DIN EN ISO 11890-1:2007-09 | Identical |
| DS EN ISO 11890-1 : 2007 | Identical |
| ONORM EN ISO 11890-1 : 2007 | Identical |
| NS EN ISO 11890-1 : 2ED 2007 | Identical |
| NEN ISO 11890-1 : 2000 | Identical |
| BS 3900-A23(2000) : 2000 AMD 13285 | Identical |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| BS 3900-A24(2000) : 2000 AMD 13286 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
| BS 5X 17(1998) : 1998 | SPECIFICATION FOR OLEORESINOUS VARNISH FOR AEROSPACE PURPOSES |
| 17/30362165 DC : 0 | BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| BS EN ISO 17895:2005 | Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
| BS EN 4588:2007 | Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip |
| SAE AMS 3095 : 2004 | PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM |
| BS EN 16402:2013 | Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing |
| BS EN 16516:2017 | Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| SAE AMS P 21600 : 2013 | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
| UNI EN 16402 : 2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| I.S. EN 16516:2017 | CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| UNE-EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| I.S. EN 14468-1:2015 | TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| VDI 3456:2009-12 | Emission control - Refinishing and finishing of vehicles |
| VDI 3455:2013-08 | Emission control - High-volume car body painting plants |
| BS EN 4595:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance |
| SAE AMS 3604 : 2015 | HEAT RESISTANT ALUMINIZED PAINT |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 4595:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| UNI EN 4594 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| EN 16402:2013 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| DIN EN 14468-1:2015-05 | Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods; German version EN 14468-1:2015 |
| ISO 17895:2005 | Paints and varnishes — Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
| I.S. EN ISO 11890-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| UNI EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
| EN 16516:2017 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| I.S. EN 16402:2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| BS EN 4594:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance |
| 15/30322088 DC : 0 | BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| PREN 4588 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
| BS EN 14468-1:2015 | Table tennis Table tennis tables, functional and safety requirements, test methods |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| BS EN ISO 11890-2:2013 | Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method |
| UNE-EN 14468-1:2015 | Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN 14468-1:2015 | Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods |
| EN 4594:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 17895:2005 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN 4595:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance |
| EN 4588:2007 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| 98/124702 DC : DRAFT OCT 1998 | DRAFT BS 3900-K3 - METHODS OF TEST FOR PAINTS - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - DETERMINATION OF TIN-BASED BIOCIDES IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
| 03/311251 DC : DRAFT JULY 2003 | BS X 37 - INTUMESCENT PAINT FOR AEROSPACE PURPOSES |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| 12/30258159 DC : 0 | BS EN 16402 - PAINT AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| UNI EN 4595 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| 17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| BS 2X 35(2003) : 2003 | SELECTIVELY REMOVABLE INTERMEDIATE COATING FOR AEROSPACE PURPOSES |
| I.S. EN 4594:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| UNE-EN 16402:2014 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| DIN EN ISO 17895:2005-06 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| DIN EN 16402:2014-02 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| NACE AMPP SP21417:2023 | Performance Requirements for Navy Ships Exterior Topside Coatings |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.