ISO 11737-1:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
14-09-2023
Superseded by
Published date
20-03-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11737-1:2006 specifies requirements and provides guidance for the enumeration and microbial characterization of the population of viable micro-organisms on or in a medical device, component, raw material or package.
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN ISO 11737-1:2018 | Identical |
| ONORM EN ISO 11737-1 : 2011 | Identical |
| UNE-EN ISO 11737-1:2007 | Identical |
| SAC GB/T 19973-1 : 2015 | Identical |
| GOST ISO 11737-1 : 2012 | Identical |
| UNI EN ISO 11737-1 : 2006 | Identical |
| SN EN ISO 11737-1 : 2006 CORR 2009 | Identical |
| NS EN ISO 11737-1 : 2018 | Identical |
| PN EN ISO 11737-1 : 2007 AC 2009 | Identical |
| UNE-EN ISO 11737-1:2006 | Identical |
| I.S. EN ISO 11737-1:2018&LC:2018 | Identical |
| GOST R ISO 11737-1 : 2000 | Identical |
| BS EN ISO 11737-1:2006 | Identical |
| AAMI ISO 11737-1 : 2006 | Identical |
| DIN EN ISO 11737-1:2009-09 | Identical |
| AAMI ISO 11737-1 : 2006 : R2011 | Identical |
| NBN EN ISO 11737-1 : 2006 COR 2009 | Identical |
| 99/562423 DC : DRAFT APR 99 | BS:ENISO 14937 - STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL CRITERIA FOR CHARACTERIZATION OF A STERILIZING AGENT AND DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS |
| 03/104519 DC : DRAFT FEB 2003 | BS ISO 11737-3 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 3: GUIDANCE ON EVALUATION AND INTERPRETATION OF BIOBURDEN DATA |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 15883-7 E : 2016 | WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016) |
| 17/30363625 DC : DRAFT SEP 2017 | BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS EN ISO 15883-7:2016 | Washer-disinfectors Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment |
| BS EN ISO 13504:2012 | Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 08/30149503 DC : DRAFT JAN 2008 | BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| I.S. EN ISO 22442-3:2007 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| NSF P155-1-08 : 2003 | NSF-DISPOSABLE FOOD CONTACT GLOVES |
| ISO/TS 15843:2000 | Sterilization of health care products Radiation sterilization Product families and sampling plans for verification dose experiments and sterilization dose audits, and frequency of sterilization dose audits |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DD CEN ISO/TS 11135-2:2008 | Sterilization of health care products. Ethylene oxide Guidance on the application of ISO 11135-1 |
| ANSI/AAMI/ISO 11138-1:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| 05/30106198 DC : 0 | EN ISO 22442-3 - MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| 07/30157769 DC : DRAFT DEC 2007 | BS EN ISO 11737-2 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE VALIDATION OF A STERILIZATION PROCESS |
| CSA Z11135-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| CSA Z1416: 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| S.R. CEN ISO/TS 13004:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] (ISO/TS 13004:2013) |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 22442-3:2007 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO TIR 17665-3:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| ISO 19227:2018 | Implants for surgery — Cleanliness of orthopedic implants — General requirements |
| AAMI/ISO TIR17665-3:2014(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| PREN ISO 11137-2 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 25841:2017 | Female condoms — Requirements and test methods |
| ISO 18362:2016 | Manufacture of cell-based health care products Control of microbial risks during processing |
| CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI CEN ISO/TS 13004 : 2014 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| 17/30358658 DC : 0 | BS EN 13795-1 - SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 1: SURGICAL DRAPES AND GOWNS |
| I.S. EN 13795:2011 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 17/30358661 DC : 0 | BS EN 13795-2 - SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 2: CLEAN AIR SUITS |
| UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN 14683 : 2014 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| ISO 13408-2:2018 | Aseptic processing of health care products — Part 2: Sterilizing filtration |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14534:2015 | Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements |
| BS EN ISO 14160:2011 | Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| BS EN ISO 8871-4:2006 | Elastomeric parts for parenterals and for devices for pharmaceutical use Biological requirements and test methods |
| BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
| NF EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| CEN ISO/TR 14969:2005 | Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004) |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ONORM EN ISO 11137-2 : 2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE (ISO 11137-2:2013) |
| ONORM ONR CEN ISO/TS 13004 : 2014 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] (ISO/TS 13004:2013) |
| ANSI/AAMI/ ISO 11137-2:2013(R2019) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN ISO 13504:2013 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| PREN 14683 : DRAFT 2017 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| PREN 13795-1 : DRAFT 2017 | SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 1: SURGICAL DRAPES AND GOWNS |
| 04/30078095 DC : DRAFT JUL 2004 | ISO 11138-1 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| 15/30321502 DC : 0 | BS EN ISO 11138-1 - STERILIZATION OF HEALTH PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| PD ISO/TS 17665-3:2013 | Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| 11/30244091 DC : 0 | BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 11/30212235 DC : 0 | BS EN ISO 13504 - DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| CSA Z14161 : 2011 : R2015 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| CAN/CSA-ISO 15883-7:17 | Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (Adopted ISO 15883-7:2016, first edition, 2016-02-01) |
| NF CEN ISO/TS 11135-2 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| 04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS PD ISO/TS 13004 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| CSA Z11137-2 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| CSA Z11135-2 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| CSA Z11138-1 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| CAN/CSA-ISO 11138-1:17 | Sterilization of health care products — Biological indicators — Part 1: General requirements (Adopted ISO 11138-1:2017, third edition, 2017-03) |
| AAMI ISO 22442-3 : 2007 : R2011 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| UNI CEN ISO/TS 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| AAMI TIR52 : 2014 | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
| ASTM F 2347 : 2015 : REDLINE | Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| AAMI ISO 11137-2 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11737-2 : 2009 : R2014 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| AAMI ISO 11737-2 :2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| EN ISO 13408-2:2018 | Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2018) |
| BS EN 13795:2011+A1:2013 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
| CSA Z17665-2:09 (R2019) | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT) |
| AAMI ISO 13408-2 : 2003 : R2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN 556-2:2015-11 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| DIN EN ISO 22442-3:2008-03 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| BS EN 556-2:2015 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Requirements for aseptically processed medical devices |
| BS EN ISO 11737-2:2009 | Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| UNE-EN 14065:2017 | Textiles - Laundry processed textiles - Biocontamination control system |
| BS EN ISO 11138-1:2017 | Sterilization of health care products. Biological indicators General requirements |
| ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| I.S. EN ISO 14534:2015 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011) |
| I.S. EN 14065:2016 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 11137-2:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE (ISO 11137-2:2013) |
| I.S. EN ISO 14160:2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 11138-1:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2017) |
| I.S. EN ISO 4074:2015 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| DIN EN ISO 11137-2:2015-11 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| UNI EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| VDI 2083 Blatt 9.2:2017-01 | Cleanroom technology - Consumables in the cleanroom |
| 04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| DIN EN ISO 16061:2015-09 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| 13/30285624 DC : 0 | BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| AAMI TIR52 : 2014(R2017) | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
| BS ISO 25841:2017 | Female condoms. Requirements and test methods |
| ISO 11737-3:2004 | Sterilization of medical devices Microbiological methods Part 3: Guidance on evaluation and interpretation of bioburden data |
| 14/30235350 DC : 0 | BS EN ISO 15883-7 - WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT |
| ISO 11137:1995 | Sterilization of health care products Requirements for validation and routine control Radiation sterilization |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. CEN ISO TR 14969:2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485: 2003 |
| BS PD ISO/TR 14969 : 2004 AMD 15958 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| ASTM F 3127 : 2016 | Standard Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices |
| 09/30207531 DC : 0 | BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO TIR 14969 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| CSA Z11138-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN 14683:2014-07 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| UNI EN 13795 : 2013 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
| CSA Z11137-2 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI CEN ISO/TS 11135-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| ANSI/AAMI/ISO TIR13004:2013(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF A SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 13408-2 : 2003 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION |
| I.S. EN ISO 13504:2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
| I.S. EN 16442:2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
| ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| ONORM EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 14160:2011) |
| ONORM EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
| UNE-EN ISO 14160:2012 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| I.S. EN ISO 11737-2:2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 13504:2012-10 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| PREN ISO 14160 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
| DIN EN 13795:2013-10 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
| 09/30190221 DC : 0 | BS EN 13795 - SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
| ISO 15883-7:2016 | Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment |
| I.S. EN 556-2:2015 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| AAMI ISO TIR 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 16/30288024 DC : 0 | BS EN ISO 15883-4 - WASHER-DISINFECTORS - PART 4: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR THERMOLABILE ENDOSCOPES |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| 04/30048584 DC : DRAFT MAY 2004 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| CSA Z17665-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| 17/30302489 DC : DRAFT MAR 2017 | BS EN ISO 13408-2 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION |
| UNI EN ISO 13504 : 2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 09/30157765 DC : 0 | BS EN ISO 14160 REV - STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 04/30081258 DC : DRAFT MARCH 2004 | BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS |
| 12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| 07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 03/314215 DC : DRAFT OCT 2003 | ISO TR 14969 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 12/30244415 DC : DRAFT APR 2012 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| PD CEN ISO/TS 13004:2014 | Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VD<sub>max</sub>SD |
| CSA ISO TR 14969 : 2005 : R2015 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 09/30197784 DC : 0 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
| CSA Z11135-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| CSA Z11138-1 : 2007 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN 16442:2015-05 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
| CSA ISO TR 14969 :2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| CSA ISO 11137-2 : 2016 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| BS EN 14683:2014 | Medical face masks. Requirements and test methods |
| AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
| UNE-EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
| AAMI/ISO TIR17665-2:2009(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| 14/30300957 DC : 0 | BS EN 16756 - ANTIMICROBIAL WOUND DRESSINGS - REQUIREMENTS AND TEST METHODS |
| 17/30359567 DC : 0 | BS EN 14683 - MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| EN 14683:2014 | Medical face masks - Requirements and test methods |
| I.S. EN 14683:2014 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| ISO/TS 13409:2002 | Sterilization of health care products Radiation sterilization Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches |
| I.S. EN ISO 16061:2015 | INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 13504:2012 | Dentistry — General requirements for instruments and related accessories used in dental implant placement and treatment |
| BS EN ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
| UNE-EN 556-2:2016 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| ISO/TS 13004:2013 | Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
| ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
| EN ISO 11737-2:2009 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| UNE-EN 13795:2011 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 4074:2016 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| UNE-EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 8871-4:2006 | Elastomeric parts for parenterals and for devices for pharmaceutical use Part 4: Biological requirements and test methods |
| ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
| ISO 14534:2011 | Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements |
| ISO/TS 11135-2:2008 | Sterilization of health care products Ethylene oxide Part 2: Guidance on the application of ISO 11135-1 |
| UNE-EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN 14065:2016 | Textiles. Laundry processed textiles. Biocontamination control system |
| ISO 4074:2015 | Natural rubber latex male condoms Requirements and test methods |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| EN ISO 15883-7:2016 | Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016) |
| EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN 13795:2011+A1:2013 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| EN 14065:2016 | Textiles - Laundry processed textiles - Biocontamination control system |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| EN ISO 4074:2015 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| EN ISO 13504:2012 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
| EN ISO 8871-4:2006 | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4: Biological requirements and test methods (ISO 8871-4:2006) |
| BS EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants. General requirements |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 15883-7:2016-10 | WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016) |
| PREN ISO 11135 : DRAFT 2011 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO/DIS 11135:2011) |
| ISO/TR 15844:1998 | Sterilization of health care products Radiation sterilization Selection of sterilization dose for a single production batch |
| BS ISO 18362:2016 | Manufacture of cell-based health care products. Control of microbial risks during processing |
| ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
| 12/30251858 DC : 0 | BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| 16/30312836 DC : 0 | BS ISO 19227 - CLEANING OF ORTHOPEDIC IMPLANTS - GENERAL REQUIREMENTS |
| DD CEN ISO/TS 17665-2:2009 | Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1 |
| PD CEN ISO/TR 14969:2005 | Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 |
| CSA ISO 11137 : 1998 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - RADIATION STERILIZATION |
| 04/30048301 DC : DRAFT MAY 2004 | BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| S.R. CEN ISO TS 17665-2:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| I.S. EN ISO 13408-2:2018 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION (ISO 13408-2:2018) |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11137-2 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| CSA ISO TR 14969 : 2005 : R2010 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 14160:2011(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN ISO 15883-7:2016 | Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016) |
| CSA Z11138-1 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| PREN 13795-2 : DRAFT 2017 | SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 2: CLEAN AIR SUITS |
| S.R. CEN ISO TS 11135-2:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| AAMI ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO TIR 13004 :2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF A SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| I.S. EN ISO 15883-7:2016 | WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016) |
| ONORM EN ISO 11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| AAMI ISO TIR 11135-2 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 11135-1 |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| ASTM F 2847 : 2017 : REDLINE | Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments |
| NF EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| DIN EN ISO 11138-1:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2017) |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| DIN EN 14065:2016-08 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| UNE-EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| UNE-EN ISO 11737-2:2010 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 11137-2:2015 | Sterilization of health care products. Radiation Establishing the sterilization dose |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
| BS EN ISO 4074:2015 | Natural rubber latex male condoms. Requirements and test methods |
| EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| CEN ISO/TS 13004:2014 | Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013) |
| EN ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents (ISO 22442-3:2007) |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| CEN ISO/TS 17665-2:2009 | Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) |
| NBR 16064 : 2016 | TEXTILES FOR HEALTH - SURGICAL DRAPES, GOWNS AND CLOTHES FOR CLEANROOM USED FOR PATIENTS, HEALTH PROFESSIONALS AND EQUIPMENT - REQUIREMENTS AND TEST METHODS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.