ISO 11727:1999
Current
Current
The latest, up-to-date edition.
Pneumatic fluid power Identification of ports and control mechanisms of control valves and other components
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
06-05-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1.1 This International Standard includes rules for identifying and marking ports in pneumatic directional control
valves. These ports are the main flow connections, control connections and pilot supply connections.
1.2 This International Standard includes rules for identifying and marking electrical leads for solenoids. It is not
applicable to internal electrical connections across manifold sections, such as connections to bus systems.
1.3 This International Standard includes rules for identifying and marking control mechanisms of directional control
valves.
1.4 This International Standard includes rules for identifying and marking ports and/or flow path directions in filters,
regulators, lubricators, non-return (check) valves, flow control valves and other ancillary devices.
1.5 This International Standard does not include rules for identifying and marking ports on proportional pneumatic
valves, air logic valves, cylinders, air motors, semi-rotary actuators, air compressors, air dryers or other devices not
specifically described in this International Standard.
| DevelopmentNote |
Supersedes NFPA T3.21.15 (09/2004)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| JIS B 8380:2002 | Identical |
| NEN ISO 11727 : 1999 | Identical |
| PN ISO 11727 : 2001 | Identical |
| SAC GB/T 32215 : 2015 | Identical |
| BIS IS 15331 : 2003 | Identical |
| BS ISO 11727:1999 | Identical |
| DIN ISO 11727:2003-10 | Identical |
| NF ISO 11727 : 2002 | Identical |
| UNE-EN ISO 4414:2011 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| 13/30250817 DC : 0 | BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS |
| BS ISO 5599-2:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector |
| BS EN ISO 4414:2010 | Pneumatic fluid power. General rules and safety requirements for systems and their components |
| DIN ISO 12238:2005-12 | Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001) |
| 09/30196753 DC : 0 | BS ISO 10041-1 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC FLOW RATE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE FOR THREE-PORT CONTROL VALVES |
| BS ISO 15407-2:2003 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector |
| BS ISO 10041-1:2010 | Pneumatic fluid power. Electro-pneumatic continuous flow control valves Main characteristics to include in the supplier\'s literature |
| BS ISO 1219-1 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHICAL SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS |
| 09/30196683 DC : 0 | BS ISO 10094-1 - PNEUMATIC FLUID POWER - ELECTRICALLY MODULATED PNEUMATIC PRESSURE CONTROL VALVES - PART 1: MAIN CHARACTERISTICS TO INCLUDE IN THE SUPPLIER'S LITERATURE |
| DIN EN ISO 4414:2011-04 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| ISO 5599-1:2001 | Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector |
| ISO 6953-1:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements |
| ISO 20401:2017 | Pneumatic fluid power systems — Directional control valves — Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
| ISO 15218:2003 | Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces |
| BS ISO 17082:2004 | Pneumatic fluid power. Valves. Data to be included in supplier literature |
| 00/716535 DC : DRAFT NOV 2000 | ISO/CD 20401 - FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM |
| NF EN ISO 4414 : 2011 | PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS |
| 16/30330392 DC : 0 | BS ISO 20401 - PNEUMATIC FLUID POWER SYSTEMS - DIRECTIONAL CONTROL VALVES - SPECIFICATION OF PIN ASSIGNMENT FOR ELECTRICAL ROUND CONNECTORS OF DIAMETERS 8 MM AND 12 MM |
| BS ISO 15407-1:2000 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces without electrical connector |
| BS ISO 10041-2:2010 | Pneumatic fluid power. Electro-pneumatic continuous flow control valves Test methods to determine main characteristics to include in the supplier\'s literature |
| BS ISO 20401:2017 | Pneumatic fluid power systems. Directional control valves. Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors |
| ISO 15407-2:2003 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector |
| DIN ISO 1219-1:2007-12 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHIC SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS |
| ISO 10041-1:2010 | Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 1: Main characteristics to include in the supplier's literature |
| ISO 15407-1:2000 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 1: Mounting interface surfaces without electrical connector |
| ISO 6953-2:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
| BS ISO 10094-1:2010 | Pneumatic fluid power. Electro-pneumatic pressure control valves Main characteristics to include in the supplier\'s literature |
| BS ISO 12238:2001 | Pneumatic fluid power. Directional control valves. Measurement of shifting time |
| BS ISO 6953-2:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics to be included in literature from suppliers |
| ISO 5599-2:2001 | Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector |
| ISO 19973-5:2015 | Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| ISO 10041-2:2010 | Pneumatic fluid power Electro-pneumatic continuous flow control valves Part 2: Test methods to determine main characteristics to include in the supplier's literature |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| BS ISO 6953-1:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to be included in literature from suppliers and product-marking requirements |
| 13/30250847 DC : 0 | BS ISO 6953-1 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS AND PRODUCT-MARKING REQUIREMENTS |
| BS ISO 4414:1998 | Pneumatic fluid power. General rules relating to systems |
| BS ISO 19973-5:2015 | Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves |
| BS ISO 5599-1:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector |
| DIN ISO 20401:2007-07 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm (ISO 20401:2005 + Cor. 1:2005) |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 10094-1:2010 | Pneumatic fluid power Electro-pneumatic pressure control valves Part 1: Main characteristics to include in the supplier's literature |
| ISO 17082:2004 | Pneumatic fluid power — Valves — Data to be included in supplier literature |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.