ISO 11484:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-04-2019
Superseded by
Language(s)
English
Published date
12-02-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11484:2009 describes an employer's qualification system for non-destructive testing (NDT) personnel performing the inspection of the following steel products under the employer's responsibility:
- tubes/pipes (seamless or welded);
- flat products, long products, rails, bars, sections, rod, wire.
| DevelopmentNote |
DRAFT ISO/DIS 11484 is also available for this standard. (05/2018)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R ISO 11484 : 2014 | Identical |
| BS ISO 11484:2009 | Identical |
| DIN EN ISO 10893-4:2011-07 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| BS EN ISO 10893-1:2011 | Non-destructive testing of steel tubes Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
| UNE-EN ISO 10893-3:2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011) |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
| BS EN ISO 10893-5:2011 | Non-destructive testing of steel tubes Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| NF EN ISO 10893-9 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
| DIN EN ISO 10893-2:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| UNI EN ISO 10893-4 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 4: LIQUID PENETRANT INSPECTION OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| 09/30166464 DC : 0 | BS ISO 10893-3 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATIC FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| BS EN ISO 10893-4:2011 | Non-destructive testing of steel tubes Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
| ONORM EN ISO 10893-8 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| DIN EN ISO 10893-9:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| 06/30125917 DC : DRAFT JUN 2006 | ISO 10407-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF DRILL STEM ELEMENTS |
| 15/30325000 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| BS ISO 17577:2006 | Steel. Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm |
| 17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| 09/30166473 DC : 0 | BS ISO 10893-6 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 06/30159843 DC : 0 | BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| UNI EN ISO 10893-3 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| 09/30166488 DC : 0 | BS ISO 10893-11 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| 08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| DIN EN ISO 10893-3:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| API 5A5 : 2005 : INC : ERR 1 : 2009 : R2015 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| ISO 13663:1995 | Welded steel tubes for pressure purposes Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| ISO 12094:1994 | Welded steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
| EN ISO 10893-6:2011 | Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011) |
| NF EN ISO 10893-6 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| NF EN ISO 10893-7 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| I.S. EN ISO 10893-4:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 4: LIQUID PENETRANT INSPECTION OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| NF EN ISO 10893-10 : 2011 | NON DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| ISO 10893-1:2011 | Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
| BS EN 10305-2:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN 10305-2:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| I.S. EN ISO 15463:2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
| I.S. EN 10216-4:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN ISO 10893-6:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN ISO 10893-5:2011 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| DIN EN ISO 10893-11:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| UNI EN ISO 10893-6 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| DIN EN ISO 10893-5:2011-07 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011 |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| UNE-EN ISO 10893-4:2011 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| API 5A5 : 2005 : INC : ERR 1 : 2009 : R2010 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| DIN EN ISO 10893-1:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAKTIGHTNESS |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 09/30166482 DC : 0 | BS ISO 10893-9 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| UNE-EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
| 09/30166485 DC : 0 | BS ISO 10893-10 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATIC FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| 14/30275134 DC : 0 | BS ISO 17577 - STEEL - ULTRASONIC TESTING FOR STEEL FLAT PRODUCTS OF THICKNESS EQUAL TO OR GREATER THAN 6 MM |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| UNI EN ISO 10893-7 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| UNE-EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
| BS EN ISO 10893-11:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| DIN EN ISO 10893-8:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| I.S. EN ISO 10893-7:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| UNE-EN ISO 10893-12:2011 | Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) |
| I.S. EN ISO 10893-9:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| I.S. EN ISO 10893-6:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| I.S. EN ISO 10893-8:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 12096:1996 | Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| ONORM EN ISO 10893-6 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 6: RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| UNE-EN ISO 10893-5:2011 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) |
| UNE-EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| DIN EN 10305-6:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| UNE-EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| UNE-EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| DIN EN 10305-3:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| UNE-EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| I.S. EN 10305-5:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| I.S. EN 10216-1:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 10305-6:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| I.S. EN 10305-4:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10305-1:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN 10305-3:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| DIN EN ISO 10893-7:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| 15/30324994 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| PREN 10305-5 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| ISO 11496:1993 | Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections |
| BS EN ISO 10893-6:2011 | Non-destructive testing of steel tubes Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| UNI EN ISO 10893-10 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN ISO 10893-12:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| 16/30332608 DC : DRAFT JAN 2016 | BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| UNE-EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| BS EN ISO 10893-2:2011 | Non-destructive testing of steel tubes Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| 09/30166492 DC : 0 | BS ISO 10893-12 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| 09/30166458 DC : 0 | BS ISO 10893-1 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATIC ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS IN SUBSTITUTION OF HYDROSTATIC TEST |
| ONORM EN ISO 10893-11 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| ONORM EN ISO 10893-1 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAKTIGHTNESS |
| ONORM EN ISO 10893-2 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| BS EN ISO 10893-10:2011 | Non-destructive testing of steel tubes Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| 09/30166479 DC : 0 | BS ISO 10893-8 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| NF EN ISO 10893-8 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| PREN 10305-6 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| PREN 10210-2 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 10893-2:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| UNE-EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
| BS EN ISO 10893-7:2011 | Non-destructive testing of steel tubes Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| ISO 10893-6:2011 | Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| UNI EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10305-2:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 10305-5:2010 | Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| ISO 10893-9:2011 | Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
| UNE-EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| ISO 10893-11:2011 | Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| UNE-EN 10216-4:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| DIN EN 10305-5:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| ISO 10893-3:2011 | Non-destructive testing of steel tubes Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN ISO 10893-12:2011 | Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) |
| EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
| EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
| ONORM EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
| EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
| UNI EN ISO 15463 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
| UNI EN 10216-4 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNI EN 10216-1 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNI EN 10216-3 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| 03/301625 DC : DRAFT JAN 2003 | BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
| I.S. EN ISO 10893-12:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| NF EN ISO 10893-12 : 2011 | NON DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| ISO 13664:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| API 5A5 CHINESE : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| 15/30325003 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| NF EN ISO 10893-2 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| BS EN ISO 10893-3:2011 | Non-destructive testing of steel tubes Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS ISO 10332:2010 | Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| 09/30166470 DC : 0 | BS ISO 10893-5 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: MAGNETIC PARTICLE INSPECTION OF SEAMLESS AND WELDED FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| 09/30167484 DC : 0 | BS ISO 10332 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS AS A SUBSTITUTION FOR THE HYDRAULIC TEST |
| I.S. EN ISO 10893-3:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| BS EN ISO 10893-8:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| 09/30166461 DC : 0 | BS ISO 10893-2 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATIC EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| 15/30324991 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| NF EN ISO 10893-3 : 2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
| ISO 10543:1993 | Seamless and hot-stretch-reduced welded steel tubes for pressure purposes Full peripheral ultrasonic thickness testing |
| 15/30324997 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN ISO 10893-10:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| BS EN ISO 10407-2:2008 | Petroleum and natural gas industries. Rotary drilling equipment Inspection and classification of used drill stem elements |
| UNI EN ISO 10893-9 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| UNI EN ISO 10893-12 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| UNI EN ISO 10893-11 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| UNI EN ISO 10893-5 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: MAGNETIC PARTICLE INSPECTION OF SEAMLESS AND WELDED FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| UNE-EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
| ONORM EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| ISO 17577:2016 | Steel Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN ISO 10893-3:2011 | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-3:2011) |
| ONORM EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| ISO 10893-12:2011 | Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
| UNE-EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| ISO 10893-5:2011 | Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| ISO 15463:2003 | Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| BS EN 10305-6:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UNE-EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| UNE-EN ISO 10893-7:2011 | Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011) |
| BS EN 10305-3:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
| ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| BS EN 10305-1:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| ISO 10893-4:2011 | Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
| BS EN ISO 15463:2003 | Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| UNE-EN 10216-1:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| API 7G-2 SPANISH : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| UNE-EN ISO 10893-6:2011 | Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011) |
| UNI EN ISO 10893-8 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| BS EN ISO 10893-12:2011 | Non-destructive testing of steel tubes Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
| API 7G-2 : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| BS EN ISO 10893-9:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
| ONORM EN ISO 10893-10 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| ONORM EN ISO 10893-12 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| DIN EN ISO 10893-10:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| ONORM EN ISO 10893-9 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
| NF EN ISO 10893-4 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 4: LIQUID PENETRANT INSPECTION OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| ISO 10332:2010 | Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
| 09/30143423 DC : DRAFT MAY 2009 | BS EN ISO 11120 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN CONSTRUCTION AND TESTING |
| 15/30324988 DC : 0 | BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| UNI EN ISO 10893-1 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAKTIGHTNESS |
| 09/30166476 DC : 0 | BS ISO 10893-7 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 03/313799 DC : DRAFT AUG 2003 | ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| NF EN ISO 10893-1 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAK TIGHTNESS |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| 09/30166467 DC : 0 | BS ISO 10893-4 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 4: LIQUID PENETRANT INSPECTION OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| PREN 10219-2 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| API 7G-2 : 2009 : INC : ERR 1 : 2009 : R2015 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| API 5A5 : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| I.S. EN ISO 10893-1:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 1: AUTOMATED ELECTROMAGNETIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE VERIFICATION OF HYDRAULIC LEAKTIGHTNESS |
| I.S. EN ISO 10407-2:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| ISO 10124:1994 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections |
| UNI EN ISO 10893-2 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 16/30332614 DC : 0 | BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| ONORM EN ISO 10893-7 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 7: DIGITAL RADIOGRAPHIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
| UNI EN ISO 10407-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ISO 10893-7:2011 | Non-destructive testing of steel tubes Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
| EN ISO 10893-7:2011 | Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011) |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| I.S. EN ISO 10893-11:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| I.S. EN ISO 10893-5:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: MAGNETIC PARTICLE INSPECTION OF SEAMLESS AND WELDED FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF SURFACE IMPERFECTIONS |
| ONORM EN ISO 10893-3 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 3: AUTOMATED FULL PERIPHERAL FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 10305-4:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN ISO 10893-4:2011 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| DIN EN 10305-4:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ISO/TR 25108:2006 | Non-destructive testing Guidelines for NDT personnel training organizations |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO/TR 25107:2006 | Non-destructive testing Guidelines for NDT training syllabuses |
| ASNT CP 189 : 2016 | QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.