ISO 11137:1995
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Sterilization of health care products Requirements for validation and routine control Radiation sterilization
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
12-04-2019
Published date
09-03-1995
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies requirements for validation, process control and routine monitoring in the radiation sterilization of health care products. Applies to continuous and batch type gamma irradiators using the radionuclides 60 Co and 137 Cs, and to irradiators using a beam from an electron or x-ray generator. Does not cover facility design, licensing, operator training, factors related to radiation safety, the assessment of the suitability of the product for its intended use.
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| SAC GB 18280 : 2000 | Identical |
| AAMI TIR27 : 1ED 2001 | Identical |
| CSA ISO 11137 : 1998 | Identical |
| AAMI ISO 11137 : 94 AMD 1 2002 | Identical |
| AS ISO 11137-2002 | Identical |
| AAMI TIR17 : 2008 | Identical |
| GOST R ISO 11137 : 2000 | Identical |
| 03/104519 DC : DRAFT FEB 2003 | BS ISO 11737-3 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 3: GUIDANCE ON EVALUATION AND INTERPRETATION OF BIOBURDEN DATA |
| 03/108542 DC : DRAFT MAY 2003 | BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 5840:2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| 16/30310656 DC : 0 | BS EN ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS |
| 08/30184486 DC : DRAFT JUNE 2008 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
| ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| 13/30276989 DC : 0 | BS EN ISO 11070 - STERILE, SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS |
| I.S. EN 13503-8:2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 8: FUNDAMENTAL REQUIREMENTS |
| 02/564514 DC : DRAFT OCT 2002 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| DIN EN ISO 7197:2009-08 | NEUROSURGICAL IMPLANTS - STERILE, SINGLE-USE HYDROCEPHALUS SHUNTS AND COMPONENTS |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 08/30170025 DC : DRAFT AUG 2008 | BS ISO 28620 - MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES |
| 13/30284721 DC : 0 | BS EN ISO 8536-8 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION EQUIPMENT FOR USE WITH PRESSURE INFUSION APPARATUS |
| 05/30106198 DC : 0 | EN ISO 22442-3 - MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| 04/30118691 DC : DRAFT AUG 2004 | BS ISO ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV |
| 02/565247 DC : DRAFT DEC 2002 | ISO 8637 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| BS ISO 14972:1998 | Sterile obturators for single use with over-needle peripheral intravascular catheters |
| CSA Z11140.1 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| PREN ISO 11137-2 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| CSA ISO 7199 : 0 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
| CSA ISO 13488 : 1998 | QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9002 |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ASTM F 2761 : 2009 : R2013 | Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model |
| BS EN ISO 11140-1:2014 | Sterilization of health care products. Chemical indicators General requirements |
| BS EN ISO 22803:2005 | Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file |
| UNE-EN ISO 16672:2016 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| EN 13503-8 : 2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 8: FUNDAMENTAL REQUIREMENTS |
| CEN ISO/TR 14969:2005 | Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004) |
| EN ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
| ANSI/AAMI/ ISO 11137-2:2013(R2019) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| 04/30078095 DC : DRAFT JUL 2004 | ISO 11138-1 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| 08/30179586 DC : DRAFT MAR 2008 | BS ISO 7199 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
| BS ISO 10651-5:2006 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Gas-powered emergency resuscitators |
| 04/30101211 DC : DRAFT APR 2004 | ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| 14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
| 08/30179589 DC : DRAFT MAR 2008 | BS ISO 15674 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS |
| 13/30284770 DC : 0 | BS EN ISO 8536-9 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT |
| 03/103026 DC : DRAFT JAN 2003 | BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| BS EN 60544-1:2013 | Electrical insulating materials. Determination of the effects of ionizing radiation Radiation interaction and dosimetry |
| AAMI ISO 5840 : 2005 : R2010 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| CSA Z11137-2 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| 08/30179592 DC : DRAFT MAR 2008 | BS ISO 15675 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS |
| AAMI ISO 5840 :2005 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| AAMI ISO 11137-2 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| ISO/TS 15539:2000 | Cardiovascular implants Endovascular prostheses |
| ASTM F 2407 : 2006 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ASTM E 1608 : 2015 | Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV |
| ASTM E 1538 : 2009 | PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM |
| DIN EN ISO 22803:2006-01 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004) |
| IEC 60544-1:2013 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry |
| I.S. EN ISO 21649:2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11140-1:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11140-1:2014) |
| I.S. EN ISO 11137-2:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE (ISO 11137-2:2013) |
| DIN EN ISO 11137-2:2015-11 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| BS ISO 15572:1998 | Guide for estimating uncertainties in dosimetry for radiation processing |
| ISO 11737-3:2004 | Sterilization of medical devices Microbiological methods Part 3: Guidance on evaluation and interpretation of bioburden data |
| BS EN ISO 7197:2009 | Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components |
| AAMI ISO 10651-5 : 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| 13/30284773 DC : 0 | BS EN ISO 8536-10 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT |
| CEI EN 60544-1 : 2014 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY |
| 13/30284776 DC : 0 | BS EN ISO 8536-11 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT |
| BS EN 60601-2-12:2006 | Medical electrical equipment Particular requirements for the safety of lung ventilators. Critical care ventilators |
| 04/300654 DC : DRAFT JAN 2004 | BS EN ISO 14630 - NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| BS ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes. Requirements |
| AAMI ISO TIR 14969 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 02/564517 DC : DRAFT OCT 2002 | BS EN ISO 8536-10 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT |
| CSA ISO TR 14969 : 2005 : R2010 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 03/103294 DC : DRAFT JAN 2003 | BS EN ISO 10651-6 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME CARE VENTILATORY SUPPORT DEVICES |
| BS ISO 25539-1 : 2003 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES |
| 14/30257644 DC : 0 | BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES |
| 08/30178723 DC : DRAFT AUG 2008 | BS ISO 15798 - OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES |
| 03/101659 DC : DRAFT JAN 2003 | ISO 22803 - DENTISTRY - MEMBRANE MATERIALS FOR GUIDED TISSUE REGENERATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| 04/30088722 DC : DRAFT APR 2004 | ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: TERMINOLOGY |
| CSA Z11137-2 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| CEI EN 60601-2-12 : 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS |
| ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
| I.S. EN ISO 7197:2009 | NEUROSURGICAL IMPLANTS - STERILE, SINGLE-USE HYDROCEPHALUS SHUNTS AND COMPONENTS |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 11140-1:2015 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| ISO 7197:2006 | Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| ISO 5840:2005 | Cardiovascular implants Cardiac valve prostheses |
| ISO 22794:2007 | Dentistry Implantable materials for bone filling and augmentation in oral and maxillofacial surgery Contents of a technical file |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| 04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
| UNI EN ISO 5840 : 2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| 02/560598 DC : DRAFT FEB 2002 | ISO/DIS 13485 - QUALITY SYSTEMS - MEDICAL DEVICES - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES |
| BS EN ISO 25539-1:2017 | Cardiovascular implants. Endovascular devices Endovascular prostheses |
| UNI EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| 04/30109483 DC : DRAFT AUG 2004 | BS ISO ASTM 51608 - PRACTICE FOR DOSIMETRY IN AN X-RAY (BREMSSTRAHLUNG) FACILITY FOR RADIATION PROCESSING |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 01/563350 DC : DRAFT AUG 2001 | BS ISO 25539-1 - CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES |
| 02/564513 DC : DRAFT OCT 2002 | BS EN ISO 1135-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
| 04/30081258 DC : DRAFT MARCH 2004 | BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS |
| 11/30219211 DC : 0 | BS EN ISO 5840-3 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY MINIMALLY INVASIVE TECHNIQUES |
| BS PD ISO/TR 14969 : 2004 AMD 15958 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 03/314215 DC : DRAFT OCT 2003 | ISO TR 14969 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| BS EN ISO 13488:2001 | Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002 |
| BS 7208-19(2001) : 2001 | CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - VOCABULARY - PART 2: CONTACT LENS CARE PRODUCTS |
| UNI EN ISO 7197 : 2009 | NEUROSURGICAL IMPLANTS - STERILE, SINGLE-USE HYDROCEPHALUS SHUNTS AND COMPONENTS |
| 02/564516 DC : DRAFT OCT 2002 | BS EN ISO 8536-9 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 9: FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT |
| 03/103293 DC : DRAFT JAN 2003 | BS EN ISO 10651-2 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| 07/30145258 DC : 0 | BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
| 02/565260 DC : DRAFT DEC 2002 | ISO 8638 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| CSA ISO TR 14969 : 2005 : R2015 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 02/564518 DC : DRAFT OCT 2002 | BS EN ISO 8536-11 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 11: INFUSION FILTERS FOR USE WITH PRESSURE INFUSION EQUIPMENT |
| 09/30197784 DC : 0 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| CSA Z11140.1 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| CSA Z11140.1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| CSA ISO TR 14969 :2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| CSA ISO 11137-2 : 2016 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| I.S. EN 60544-1:2013 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY (IEC 60544-1:2013 (EQV)) |
| I.S. EN 60601-2-12:2006 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS |
| ISO 10651-5:2006 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators |
| ISO 13488:1996 | Quality systems — Medical devices — Particular requirements for the application of ISO 9002 |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| 00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
| BS EN 13503-8:2000 | Ophthalmic implants. Intraocular lenses Fundamental requirements |
| BS EN ISO 5840:2009 | Cardiovascular implants. Cardiac valve prostheses |
| BS EN ISO 22794:2009 | Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file |
| BS EN 30-1-2:2012 | Domestic cooking appliances burning gas. Safety Appliances having forced-convection ovens and/or grills |
| EN 30-1-2:2012 | Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN ISO 13488 : 2000 | QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9002 |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN ISO 22803:2005 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004) |
| EN ISO 7197:2009 | Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006, including Cor 1:2007) |
| EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| 01/561789 DC : DRAFT APR 2001 | BS ISO 13960 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - PLASMAFILTERS |
| ISO/TR 15844:1998 | Sterilization of health care products Radiation sterilization Selection of sterilization dose for a single production batch |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| ISO/TS 15843:2000 | Sterilization of health care products Radiation sterilization Product families and sampling plans for verification dose experiments and sterilization dose audits, and frequency of sterilization dose audits |
| 04/30108670 DC : DRAFT FEB 2004 | ISO 51702 - PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR RADIATION PROCESSING |
| I.S. CEN ISO TR 14969:2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485: 2003 |
| PD CEN ISO/TR 14969:2005 | Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 |
| CSA ISO 5840 : 0 | CARDIOVASCULAR IMPLANTS - CARIDAC VALVE PROSTHESES |
| 04/19975667 DC : 0 | BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - SINGLE - USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANCE OXYGENATION |
| 12/30259937 DC : 0 | BS EN 50544-1 - ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY |
| BS ISO 7197:1997 | Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components |
| 11/30227618 DC : 0 | BS ISO 11658 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - BLOOD/TISSUE CONTACT SURFACE MODIFICATIONS FOR EXTRACORPOREAL PERFUSION SYSTEMS |
| CSA Z11137-2 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| 05/30060678 DC : DRAFT SEP 2005 | BS EN ISO 22794 - DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| ASTM F 2560 : 2006 | Standard Specification for Supralaryngeal Airways and Connectors |
| 03/113382 DC : DRAFT SEP 2003 | BS EN ISO 21649 - NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| ASTM F 2726 : 2008 | Standard specification for fixation devices for tracheal tubes and other airway devices |
| ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes — Requirements |
| ISO/TS 13409:2002 | Sterilization of health care products Radiation sterilization Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| UNE-EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| BS EN ISO 11137-2:2015 | Sterilization of health care products. Radiation Establishing the sterilization dose |
| ISO 22803:2004 | Dentistry — Membrane materials for guided tissue regeneration in oral and maxillofacial surgery — Contents of a technical file |
| BS EN ISO 8320-2:2001 | Contact lenses and contact lens care products. Vocabulary Contact lens care products |
| DIN EN ISO 5840:2009-08 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| EN 60544-1:2013 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry |
| EN ISO 5840:2009 | Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) |
| EN 60601-2-12:2006 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
| CSA Z10651-5 : 2008 : R2018 | Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators |
| CSA Z10651-5 : 2008 : R2013 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z10651-5 : 2008 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z10651-5 : 2008 : INC : UPD 1 : 2011 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| ISO 9001:2015 | Quality management systems — Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.