ISO 11075:2007
Current
Current
The latest, up-to-date edition.
Aircraft — De-icing/anti-icing fluids — ISO type I
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
19-04-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11075:2007 defines the requirements for ISO type I fluids used in the removal and prevention of ice, snow, or frost on exterior surfaces of main line and regional civil transport airplanes on the ground.
ISO 11075:2007 is applicable to de-icing/anti-icing fluids for use on airplanes in general. However, the applicability may have limitations for particular airplane types. It is the airplane operator's responsibility to consult the aircraft operations manual, the aircraft maintenance manual and the service letters of the airplane manufacturer, to determine any limitations/restrictions relating to the use of de-icing/anti-icing fluids that conform to ISO 11075:2007 for the type and model of airplane to be treated.
| Committee |
ISO/TC 20/SC 9
|
| DevelopmentNote |
Supersedes ISO/DIS 11075. (04/2007)
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 11075:2007 | Identical |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| NF EN 4708-101 : 2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| 14/30299187 DC : 0 | BS EN 12312-6 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| BS M 77:1994 | Self-propelled de-icing/anti-icing vehicles. Functional requirements |
| PREN 4708-101 : DRAFT 2015 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| PREN 3909 : 200P3 | AEROSPACE SERIES - TEST FLUIDS FOR ELECTRICAL AND OPTICAL COMPONENTS AND SUB-ASSEMBLIES |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| ISO 11076:2012 | Aircraft De-icing/anti-icing methods on the ground |
| SAE ARD 50102 : 2002 | FORCED AIR OR FORCED AIR/FLUID EQUIPMENT FOR REMOVAL OF FROZEN CONTAMINANTS |
| BS EN 3909:2016 | Aerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies |
| I.S. EN 3909:2016 | AEROSPACE SERIES - TEST FLUIDS AND TEST METHODS FOR ELECTRIC COMPONENTS AND SUB-ASSEMBLIES |
| EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| SAE ARP5149C | Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground |
| 13/30271254 DC : 0 | BS ISO 11077 - AEROSPACE - SELF-PROPELLED DE-ICING/ANTI-ICING VEHICLES - FUNCTIONAL REQUIREMENTS |
| BS EN 4708-101:2017 | Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Polyolefin sleeving. Operating temperatures -55 °C to 135 °C. Product standard |
| FAA AC 135-16 : 0 | GROUND DEICING AND ANTI-ICING TRAINING AND CHECKING |
| PREN 6059-303 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| PREN 4860 P1 : 2018 | AEROSPACE SERIES - ENVIRONMENTAL TESTING - TEST XB: ABRASION OF MARKINGS, LETTERINGS, SURFACES AND MATERIALS CAUSED BY RUBBING OF FINGERTIPS AND HANDS |
| PREN 4641-102 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| BS EN 12312-6:2017 | Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment |
| I.S. EN 12312-6:2017 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT |
| I.S. EN 4641-102:2009 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| FAA AC 120-60 : 2004 | GROUND DEICING AND ANTI-ICING PROGRAM |
| BS ISO 11077:2014 | Aircraft ground equipment. De-icers. Functional requirements |
| 10/30232156 DC : 0 | BS ISO 11076 - AIRCRAFT - DE-ICING/ANTI-ICING METHODS ON THE GROUND |
| SAE AIR6284 | Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants |
| EN 4708-101:2017 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 101: Polyolefin sleeving - Operating temperatures -55 °C to 135 °C - Product standard |
| BS M 76:1994 | Aerospace. Aircraft de-icing/anti-icing methods with fluids |
| BS EN 4641-102:2009 | Aerospace series. Cables, optical 125 μm outside diameter cladding Semi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| BS ISO 11076:2012 | Aircraft. De-icing/anti-icing methods on the ground |
| 05/30141941 DC : DRAFT NOV 2005 | ISO 11076 - AIRCRAFT - GROUND-BASED DE-ICING/ANTI-ICING METHODS WITH FLUIDS |
| I.S. EN 4708-101:2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| UNE-EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| BS EN 6059-303:2017 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Resistance to fluids |
| ISO 11077:2014 | Aircraft ground equipment De-icers Functional requirements |
| EN 6059-303:2017 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids |
| EN 4641-102:2009 | Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard |
| EN 3909:2016 | Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| I.S. EN 6059-303:2017 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| FAA AC 20-117 : 1982 | HAZARDS FOLLOWING GROUND DEICING AND GROUND OPERATIONS IN CONDITIONS CONDUCIVE TO AIRCRAFT ICING |
| ISO 11076:2012 | Aircraft De-icing/anti-icing methods on the ground |
| FAA AC 135-16 : 0 | GROUND DEICING AND ANTI-ICING TRAINING AND CHECKING |
| FAA AC 120-60 : 2004 | GROUND DEICING AND ANTI-ICING PROGRAM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.