ISO 11040-4:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
03-06-2024
Superseded by
Language(s)
English, French
Published date
02-04-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11040-4:2015 applies to
- tubing-glass barrels (single-chamber design) for injection preparations, and
- sterilized subassembled syringes ready for filling.
It specifies materials, dimensions, quality, and performance requirements, as well as relevant test methods.
ISO 11040-4:2015 also specifies those components that are part of the sterilized subassembled syringe ready for filling.
Glass barrels and sterilized subassembled syringes ready for filling in accordance with ISO 11040-4:2015 are intended for single use only.
Components to complete the subassembled syringe, such as plunger and rod, are not specified in ISO 11040‑4:2015.
| Committee |
ISO/TC 76
|
| DevelopmentNote |
Supersedes ISO/DIS 11040-4. (04/2015) NEW CHILD AMD 1 2020 IS ADDED.
|
| DocumentType |
Standard
|
| Pages |
52
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 3951 (all parts) NEW CHILD AMD 1 2020 IS ADDED.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| DIN ISO 11040-4:2017-07 | Identical |
| IS/ISO 11040 : Part 4 : 2015 | Identical |
| DIN ISO 11040-4:2007-10 | Identical |
| NF ISO 11040-4 : 2015 | Identical |
| BS ISO 11040-4:2015 | Identical |
| SS-ISO 11040-4:2016 | Identical |
| NEN ISO 11040-4 : 2015 | Identical |
| DS ISO 11040-4 : 2015 | Identical |
| 10/30212297 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES |
| ISO 11040-5:2012 | Prefilled syringes — Part 5: Plunger stoppers for injectables |
| BS ISO 11040-5:2012 | Prefilled syringes Plunger stoppers for injectables |
| 09/30178949 DC : 0 | BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
| BS ISO 4802-1:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by titration method and classification |
| NF ISO 11040-8 : 2017 | PREFILLED SYRINGES - PART 8: REQUIREMENTS AND TEST METHODS FOR FINISHED PREFILLED SYRINGES |
| BS ISO 4802-2:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by flame spectrometry and classification |
| 17/30357741 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| DIN ISO 11040-5:2013-12 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
| 10/30208782 DC : DRAFT DEC 2010 | BS EN ISO 11608-3 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS |
| BS ISO 11040-6:2012 | Prefilled syringes Plastic barrels for injectables |
| BS EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications Connectors for intravascular or hypodermic applications |
| ISO 11040-6:2012 | Prefilled syringes Part 6: Plastic barrels for injectables |
| I.S. EN ISO 80369-7:2017 COR 2017 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01) |
| ANSI/AAMI/ISO 80369-7:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS |
| ISO 11040-8:2016 | Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes |
| 00/560161 DC : DRAFT JAN 2000 | BS ISO 11040-5 - PRE-FILLED SYRINGES - PART 5: PLUNGERS FOR INJECTABLES |
| 15/30304642 DC : 0 | BS ISO 11040-8 - PREFILLED SYRINGES - PART 8: REQUIREMENTS AND TEST METHODS FOR FINISHED PRIFILLED SYRINGES |
| ISO 4802-1:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification |
| ISO 4802-2:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification |
| ISO 80369-7:2016 | Small-bore connectors for liquids and gases in healthcare applications Part 7: Connectors for intravascular or hypodermic applications |
| BS EN 30-1-2:2012 | Domestic cooking appliances burning gas. Safety Appliances having forced-convection ovens and/or grills |
| EN 30-1-2:2012 | Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills |
| UNE-EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
| 13/30255554 DC : 0 | BS EN ISO 80369-7 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS WITH 6% (LUER) TAPER FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS |
| EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
| 09/30178946 DC : 0 | BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
| DIN EN ISO 80369-7:2017-10 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
| ISO 8871-1:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ISO 720:1985 | Glass Hydrolytic resistance of glass grains at 121 degrees C Method of test and classification |
| ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods |
| DIN 13097-4:2009-08 | HYPODERMIC NEEDLES - PART 4: POINT GEOMETRY, REQUIREMENTS AND TESTING |
| ISO 11040-5:2012 | Prefilled syringes — Part 5: Plunger stoppers for injectables |
| ISO 11608-5:2012 | Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 11040-7:2015 | Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
| ISO 11608-2:2012 | Needle-based injection systems for medical use Requirements and test methods Part 2: Needles |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 4802-2:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification |
| ISO 7886-1:2017 | Sterile hypodermic syringes for single use — Part 1: Syringes for manual use |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| ISO 7864:2016 | Sterile hypodermic needles for single use — Requirements and test methods |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 80369-1:2010 | Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ISO 4802-1:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification |
| ISO 23908:2011 | Sharps injury protection Requirements and test methods Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| ISO 594-2:1998 | Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 594-1:1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.