ISO 10846-3:2002
Current
Current
The latest, up-to-date edition.
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
06-06-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 10846 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specific preload. The method concerns the laboratory measurements of vibration transmissibility and is called the indirect method. This method is applicable to test elements with parallel flanges.
Measurements for translations normal and transverse to the flanges are covered in this part of ISO 10846. Annex A provides guidance for the measurement of transfer stiffnesses which include rotatory components.
The method covers the frequency range from f2 up to f3. The values of f2 and f3 are determined by the test set-up and the isolator under test.
The data obtained according to the method specified in this part of ISO 10846 can be used for
- product information provided by manufacturers and suppliers,
- information during product development,
- quality control, and
- calculation of the transfer of vibration through isolators.
| DevelopmentNote |
Supersedes ISO/FDIS 10846-3 (06/2002)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN ISO 10846-3 : 2002 | Identical |
| NEN EN ISO 10846-3 : 2002 | Identical |
| I.S. EN ISO 10846-3:2002 | Identical |
| PN EN ISO 10846-3 : 2005 | Identical |
| SN EN ISO 10846-3 : 2002 | Identical |
| UNI EN ISO 10846-3 : 2005 | Identical |
| BS EN ISO 10846-3:2002 | Identical |
| UNE-EN ISO 10846-3:2003 | Identical |
| EN ISO 10846-3:2002 | Identical |
| DIN EN ISO 10846-3:2003-06 | Identical |
| BS ISO 2017-1:2005 | Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for the application of isolation systems |
| DIN EN 13146-9:2011-12 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| MIL-DTL-24709 Revision A:2018 | PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64 |
| UNE-EN 13146-9:2011 | Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
| UNI EN 13146-9 : 2011 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| BS EN ISO 10846-2:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| BS EN ISO 10846-4:2003 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion |
| ONORM EN 12354-5 : 2011 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| I.S. EN 12354-5:2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| MIL-PRF-32407 Revision A:2016 | MOUNTS, RESILIENT (SURFACE SHIP APPLICATION) |
| DIN EN 12354-5:2009-10 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
| I.S. EN ISO 10846-1:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| I.S. EN ISO 10846-2:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| DD ENV 13481-6:2002 | Railway applications. Track. Performance requirements for fastening systems Special fastening systems for attenuation of vibration |
| ISO 2017-1:2005 | Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems |
| DIN EN ISO 10846-1:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| ENV 13481-6 : DRAFT 2002 COR 04 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
| UNI EN ISO 10846-1 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| UNI EN ISO 10846-2 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| UNI EN 12354-5 : 2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| 03/306100 DC : DRAFT APR 2003 | ISO 18437-3 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 3: SINGLE CANTILEVER BEAM METHOD |
| 03/305847 DC : DRAFT APR 2003 | ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD |
| BS EN 13146-9 : 2009 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| I.S. EN 13146-9:2009 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| BS EN ISO 10846-1:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Principles and guidelines |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| BS EN 12354-5:2009 | Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| EN 13146-9:2009+A1:2011 | Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
| EN ISO 10846-1:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008) |
| EN ISO 10846-4:2003 | Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003) |
| EN ISO 10846-2:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
| I.S. ENV 13481-6:2002 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
| DIN EN ISO 10846-2:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 7626-1:2011 | Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications |
| ISO 5347-3:1993 | Methods for the calibration of vibration and shock pick-ups Part 3: Secondary vibration calibration |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ISO 7626-2:2015 | Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| ISO 2017:1982 | Vibration and shock Isolators Procedure for specifying characteristics |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| EN ISO 266:1997 | Acoustics - Preferred frequencies (ISO 266:1997) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.