ISO 10583:1993
Current
Current
The latest, up-to-date edition.
Aerospace fluid systems — Test methods for tube/fitting assemblies
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
13-05-1993
Important note : All end users must be registered with an Account prior to user licenses being assigned.
The test methods specified apply to fitting assemblies used in aircraft fluid systems in the pressure and temperature ranges covered by pressure classes B, D and E, and temperature types I, II and III of ISO 6771. Applies each time that it is referred to in a procurement specification or other definition document which contain the pass/fail criteria for these tests.
| Committee |
ISO/TC 20/SC 10
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
THIS STANDARD IS ALSO REFERES TO :ISO 7137:1992
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| DIN ISO 10583:1998-04 | Identical |
| SAE MA 2094 : 2015 | Identical |
| SAE AS 2094 : 2011(S2018) | Identical |
| SAE J 2614 : 2018 | WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
| SAE MA 2005 : 2015 | TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC |
| 16/30282721 DC : 0 | BS ISO 18487-1 - AEROSPACE SERIES - TITANIUM TUBE FOR 35MPA OPERATING PRESSURE - PART 1: INCH SERIES |
| 04/30112507 DC : DRAFT APR 2004 | ISO 7169 - AEROSPACE - SEPARABLE TUBE FITTINGS FOR FLUID SYSTEMS, FOR 24 CONES, FOR PRESSURES UP TO 3000 PSI OR 21 KPA - PROCUREMENT SPECIFICATION INCH/METRIC |
| SAE J 356 : 2013 | WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| SAE J 526 : 2016 | WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| 12/30237808 DC : DRAFT JUNE 2012 | BS ISO 19631 - AEROSPACE - TUBE FITTINGS FOR FLUID SYSTEMS, 5000 PSI (35000 KPA) - QUALIFICATION SPECIFICATION |
| BS ISO 19631:2015 | Aerospace series. Tube fittings for fluid systems, 5 080 psi (35 000 kPa). Qualification specification |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| BS 3M 60:1998 | Separable tube fittings for fluid systems, 24° cone. General specification |
| SAE J 1065 : 2016 | NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
| BS 2M 60:1993 | Specification for separable tube fittings, 24° cone, for aerospace fluid systems |
| SAE J 525 : 2016 | WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| SAE J 524 : 2016 | SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
| BS ISO 18487-1:2017 | Aerospace series. Titanium tube for 35 MPa operating pressure Inch series |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| SAE J 2435 : 2015 | WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING |
| SAE J 1677 : 2016 | TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
| SAE J 2613 : 2017 | WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
| SAE J 2467 : 2020 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| SAE J 2551 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS |
| SAE J 2551/1 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
| SAE AIR 2000 : 2000 | AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL |
| SAE J533_201702 | FLARES FOR TUBING |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| SAE J 2467 : 2015 | WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
| ISO 19631:2015 | Aerospace series Tube fittings for fluid systems, 5 080 psi (35 000 kPa) Qualification specification |
| ISO 18487-1:2017 | Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.