ISO 10360-8:2013
Current
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 8: CMMs with optical distance sensors
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
21-11-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 10360-8:2013 specifies the acceptance tests for verifying the performance of a CMM (coordinate measuring machine) when measuring lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests are applicable only to Cartesian CMMs with optical distance sensors. While it does not explicitly apply to non-Cartesian CMMs, the parties may apply ISO 10360-8:2013 to non-Cartesian CMMs by mutual agreement.
It is not intended to be applicable to CMMs whose measuring volume is significantly smaller than the size of the test sphere. However, the principle, artefacts and procedure of the test described are useful for the acceptance and reverification tests of those CMMs ? either as it is or with modifying the parameters such as the size of the test artefacts and the number of measurements.
ISO 10360-8:2013 specifies performance requirements that can be assigned by the manufacturer or the user of the CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for verifying conformance, and applications for which the acceptance and reverification tests can be used.
| Committee |
ISO/TC 213
|
| DevelopmentNote |
Supersedes ISO/DIS 10360-8. (11/2013)
|
| DocumentType |
Standard
|
| Pages |
55
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 10360-8 : 2014 | Identical |
| NBN EN ISO 10360-8 : 2014 | Identical |
| NEN EN ISO 10360-8 : 2013 | Identical |
| NS EN ISO 10360-8 : 2013 | Identical |
| I.S. EN ISO 10360-8:2013 | Identical |
| PN EN ISO 10360-8 : 2014 | Identical |
| SN EN ISO 10360-8:2014 | Identical |
| UNI EN ISO 10360-8 : 2014 | Identical |
| IS 15635 : Part 8 : 2019 | Identical |
| BS EN ISO 10360-8:2013 | Identical |
| UNE-EN ISO 10360-8:2017 | Identical |
| EN ISO 10360-8:2013 | Identical |
| DIN EN ISO 10360-8:2014-03 | Identical |
| UNE-EN ISO 10360-8:2013 | Identical |
| BS ISO 20685-2 : 2015 | ERGONOMICS - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS |
| BS EN ISO 10360-10:2016 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers for measuring point-to-point distances |
| 14/30292314 DC : 0 | BS ISO 20685-2 - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS |
| DIN EN ISO 20685-2:2016-08 (Draft) | ERGONOMICS - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS (ISO 20685-2:2015) |
| I.S. EN ISO 10360-9:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
| DIN EN ISO 10360-9:2014-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
| I.S. EN ISO 20685-2:2017 | ERGONOMICS - 3-D SCANNING METHODOLOGIES FOR INTERNATIONALLY COMPATIBLE ANTHROPOMETRIC DATABASES - PART 2: EVALUATION PROTOCOL OF SURFACE SHAPE AND REPEATABILITY OF RELATIVE LANDMARK POSITIONS (ISO 20685-2:2015) |
| DIN EN ISO 10360-10:2017-03 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| BS EN ISO 10360-9:2013 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems |
| 14/30291326 DC : 0 | BS EN ISO 10360-12 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) |
| UNE-EN ISO 10360-10:2017 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| ISO 10360-12:2016 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 12: Articulated arm coordinate measurement machines (CMM) |
| I.S. EN ISO 10360-12:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) (ISO 10360-12:2016) |
| BS EN ISO 20685-2:2017 | Ergonomics. 3-D scanning methodologies for internationally compatible anthropometric databases Evaluation protocol of surface shape and repeatability of relative landmark positions |
| UNI EN ISO 10360-9 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS |
| ISO 10360-10:2016 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 10: Laser trackers for measuring point-to-point distances |
| ISO 10360-9:2013 | Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems |
| EN ISO 20685-2:2017 | Ergonomics - 3-D scanning methodologies for internationally compatible anthropometric databases - Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions (ISO 20685-2:2015) |
| EN ISO 10360-9:2013 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) |
| I.S. EN ISO 10360-10:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES (ISO 10360-10:2016) |
| EN ISO 10360-10:2016 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| ISO 20685-2:2015 | Ergonomics — 3-D scanning methodologies for internationally compatible anthropometric databases — Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions |
| ISO 10360-4:2000 | Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 4: CMMs used in scanning measuring mode |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 10360-1:2000 | Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO/TR 16015:2003 | Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
| ISO 10360-3:2000 | Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 3: CMMs with the axis of a rotary table as the fourth axis |
| ISO 10360-5:2010 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and multiple stylus contacting probing systems |
| ISO 10360-2:2009 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring linear dimensions |
| ISO/TS 23165:2006 | Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.