ISO 10012:2003
Current
Current
The latest, up-to-date edition.
Measurement management systems — Requirements for measurement processes and measuring equipment
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian, Spanish, Castilian
Published date
14-04-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 10012:2003 specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies quality management requirements of a measurement management system that can be used by an organization performing measurements as part of the overall management system, and to ensure metrological requirements are met.
ISO 10012:2003 is not intended to be used as a requisite for demonstrating conformance with ISO 9001, ISO 14001 or any other standard. Interested parties can agree to use ISO 10012:2003 as an input for satisfying measurement management system requirements in certification activities. Other standards and guides exist for particular elements affecting measurement results, for example, details of measurement methods, competence of personnel, interlaboratory comparisons.
ISO 10012:2003 is not intended as a substitute for, or as an addition to, the requirements of ISO/IEC 17025.
| DevelopmentNote |
Supersedes ISO/DIS 10012 (04/2003) Supersedes ISO 10012-1 and ISO 10012-2. (04/2003)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| GOST R ISO 10012 : 2008 | Identical |
| NF EN ISO 10012 : 2003 | Identical |
| NBN EN ISO 10012 : 2003 | Identical |
| NEN EN ISO 10012 : 2003 | Identical |
| NS EN ISO 10012 : 1ED 2003 | Identical |
| I.S. EN ISO 10012:2003 | Identical |
| PN EN ISO 10012 : 2004 | Identical |
| AS/NZS ISO 10012:2004 | Identical |
| SN EN ISO 10012 : 2003 | Identical |
| UNI EN ISO 10012 : 2004 | Identical |
| UNE-EN ISO 10012:2003 | Identical |
| BIS IS/ISO 10012 : 2003(R2009) | Identical |
| BS EN ISO 10012:2003 | Identical |
| EN ISO 10012:2003 | Identical |
| CSA ISO 10012 : 2003 : R2013 | Identical |
| DIN EN ISO 10012:2004-03 | Identical |
| CSA ISO 10012 : 2003 | Identical |
| DIN EN ISO 9073-5:2009-01 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| SAE AS 9120 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
| 15/30321131 DC : 0 | BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES |
| 99/562423 DC : DRAFT APR 99 | BS:ENISO 14937 - STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL CRITERIA FOR CHARACTERIZATION OF A STERILIZING AGENT AND DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS |
| MIL-DTL-83734 Revision H:2007 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE (DIPS) AND SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| FD ISO GUIDE 34 : 2010 FD | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| CEI EN 62209-2 : 2013 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| BS EN 15224:2016 | Quality management systems. EN ISO 9001:2015 for healthcare |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
| 13/30287730 DC : 0 | BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| ASTM F 3020 : 2016 | Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security |
| UNE-EN ISO 22476-1:2015 | Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test (ISO 22476-1:2012) |
| UNE-ISO/IEC TS 17021-3:2014 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems |
| MIL-DTL-28788 Revision C:2010 | SWITCHES, AIR AND LIQUID FLOW, SENSING, GENERAL SPECIFICATION FOR |
| PD CEN/TR 15983:2010 | Stationary source emissions. Guidance on the application of EN 14181:2004 |
| ECA 10-15 : 2015 | GUIDELINES ON THE CALIBRATION OF DIGITAL MULTIMETERS |
| BS EN 4650:2010 | Aerospace series. Wire and cable marking process, UV Laser |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD ISO/TS 29001:2007 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
| BS EN 62047-25:2016 | Semiconductor devices. Micro-electromechanical devices Silicon based MEMS fabrication technology. Measurement method of pull-press and shearing strength of micro bonding area |
| I.S. EN ISO 22000:2005 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. ISO 10005:2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| S.R. CEN/TR 16792:2014 | SAFETY OF CHILDREN'S CLOTHING - RECOMMENDATIONS FOR THE DESIGN AND MANUFACTURE OF CHILDREN'S CLOTHING - MECHANICAL SAFETY |
| UNE-ISO 7870-1:2013 | Control charts. Part 1: General guidelines |
| MIL-R-10509 Revision J:2007 | RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| I.S. EN ISO 11737-1:2018&LC:2018 | STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018) |
| MIL-PRF-94 Revision G:2006 | Resistor, Variable, Composition, General Specification for |
| MIL-PRF-19207 Revision G:2013 | Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for |
| DIN EN ISO 22476-5:2013-03 | Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012) |
| SAE ARP 5485 : 2017 | ENDURANCE TIME TEST PROCEDURES FOR SAE TYPE 2/3/4 AIRCRAFT DEICING/ANTI-ICING FLUIDS |
| UNI EN ISO 9073-16 : 2009 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE) |
| MIL-DTL-85670 Revision D:2012 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A |
| MIL-DTL-3661 Revision D:2013 | Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for |
| MIL-DTL-83503 Revision C:2005 | Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for |
| BS ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| MIL-R-83407 Revision D:2014 | RELAYS, REED (MERCURY WETTED), GENERAL SPECIFICATION FOR |
| MIL-DTL-49198 Revision B:2014 | HEADSET-MICROPHONE KIT, MK-1564( )/AIC |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| DD ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| 10/30238725 DC : 0 | BS EN 60469 - TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| 14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| CSA C392 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| 16/30302485 DC : 0 | BS EN ISO 11737-1 - STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCT |
| 16/30208484 DC : 0 | BS EN 15654-2 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 2: TEST IN WORKSHOP FOR NEW, MODIFIED AND MAINTAINED VEHICLES |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| MIL-PRF-27208 Revision F:2006 | RESISTOR, VARIABLE, WIREWOUND, NONPRECISION, GENERAL SPECIFICATION FOR |
| BS EN ISO 22476-5:2012 | Geotechnical investigation and testing. Field testing Flexible dilatometer test |
| I.S. EN ISO 25178-70:2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN ISO 9073-5:2008 | Textiles. Test methods for nonwovens Determination of resistance to mechanical penetration (ball burst procedure) |
| 08/30195548 DC : 0 | DD ISO/TS 16949: 2009 - QUALITY MANAGEMENT SYSTEMS: PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| AAMI TIR15 : 2016 | PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
| DD ISO/TS 29001 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| MIL-PRF-24236 Revision D:2006 | SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO/TS 16949 : 2009(R2015) | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| MIL-DTL-13484 Revision G:2011 | SWITCH, SENSITIVE: 30 VOLTS DIRECT CURRENT MAXIMUM, WATERPROOF |
| MIL-DTL-12285 Revision G:2016 | SWITCHES, THERMOSTATIC |
| BS ISO 17884:2004 | Ships and marine technology. Navigation. Searchlights for high-speed craft |
| CSA ISO 9001 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| I.S. EN 16602-20-07:2016 | SPACE PRODUCT ASSURANCE - QUALITY AND SAFETY ASSURANCE FOR SPACE TEST CENTRES |
| CSA ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| CSA C392 : 2011 : INC : UPD 2 : 2012 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| CEI EN 61744 : 2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-DTL-21604 Revision G:2017 | Switches, Rotary, Multipole and Selector, General Specification for |
| IEEE/ANSI N323AB-2013 | American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments |
| MIL-DTL-28791 Revision D:2016 | ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL-DTL-8971 Revision F:2013 | Electrodes, Graphite, Spectrometric Grade |
| MIL-PRF-49462 Revision C:2008 | RESISTOR, FIXED, FILM, HIGH VOLTAGE, GENERAL SPECIFICATION FOR |
| MIL-DTL-19491 Revision J:2014 | SEMICONDUCTOR DEVICES, PACKAGING OF |
| PREN 9137 : 200P1 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| SAE AS 5537 : 2004 | WEATHER SUPPORT TO DEICING DECISION MAKING (WSDDM) WINTER WEATHER NOWCASTING SYSTEM |
| TR 9135 : 1 | AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| SAE AS 23053 : 2016 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| I.S. EN ISO 9073-18:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| IWA 1:2005 | Quality management systems Guidelines for process improvements in health service organizations |
| CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN 15358:2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| SAE AS 9110 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| I.S. EN ISO 22476-12:2009 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM) |
| DSCC 89112 : B | POWER DIVIDER, 4-WAY, 0 DEGREE, CONNECTORS |
| AAMI TIR39:2009 | GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN ISO 22476-12:2010 | Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009) |
| AAMI TIR39:2009(R2017) | GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES |
| CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN 16001:2010 | Energy management systems - Requirements with guidance for use |
| PD ISO/TS 9002:2016 | Quality management systems. Guidelines for the application of ISO 9001:2015 |
| NSAI/ISO Guide to ISO 9001:2015 | ISO 9001:2015 FOR SMALL ENTERPRISES - WHAT TO DO? - ADVICE FROM ISO/TC 176 |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| UNE-EN ISO 22476-7:2015 | Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012) |
| ASTM D 6537 : 2000 : R2014 | Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance |
| ASTM E 1324 : 2016 : REDLINE | Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments |
| EN ISO 22476-4:2012 | Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO 22476-4:2012) |
| I.S. EN ISO 9001:2015 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
| DIN EN ISO 22000:2005-11 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
| ISO 9073-5:2008 | Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure) |
| I.S. EN ISO 13485:2016 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016) |
| BS EN 12668-1:2010 | Non-destructive testing. Characterization and verification of ultrasonic examination equipment Instruments |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| I.S. EN 14276-1:2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14160:2011 | Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN 14704-2:2007 | Determination of the elasticity of fabrics Multiaxial tests |
| BS EN ISO 13935-2:2014 | Textiles. Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the grab method |
| IEC 60068-3-5:2018 RLV | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| NF EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| IEC 60068-3-6:2018 RLV | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
| CEN ISO/TR 14969:2005 | Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004) |
| CEN/TR 15592:2007 | Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| EN 15224:2016 | Quality management systems - EN ISO 9001:2015 for healthcare |
| CEN/TR 15983:2010 | Stationary source emissions - Guidance on the application of EN 14181:2004 |
| EN 12258-2:2004 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| DIN EN 14704-2:2007-05 | DETERMINATION OF THE ELASTICITY OF FABRICS - PART 2: MULTIAXIAL TESTS |
| CEN/TR 16792:2014 | Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 13936-1:2004-07 | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method (ISO 13936-1:2004) |
| EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| DIN EN 15224:2017-05 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| MIL-PRF-50884 Revision F:2014 | Printed Wiring Board, Flexible or Rigid-Flex, General Specification for |
| MIL-DTL-83731 Revision E:2016 | SWITCHES, TOGGLE, UNSEALED AND SEALED, GENERAL SPECIFICATION FOR |
| MIL C 5 : G | CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-32192 Base Document:2005 | RESISTOR, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| W-C-375 Revision E:2013 | CIRCUIT BREAKERS, MOLDED CASE; BRANCH CIRCUIT AND SERVICE |
| SAE AMS 2432 : 2013 | SHOT PEENING, COMPUTER MONITORED |
| IPC J STD 004 RUSSIAN : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-PRF-22710 Revision H:2013 | Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| MIL-DTL-13735 Revision H:2017 | Switches, Toggle: 28 Volt DC |
| JEDEC JESD 557C : 2015 | Statistical Process Control Systems |
| MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
| W-S-896 Revision G:2014 | SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION) |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| ONORM EN 4650 : 2010 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| MIL-DTL-28748 Revision D:2001 | CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
| MIL-DTL-9419 Revision H:2016 | Switch, Toggle, Momentary, Four-Position on, Center off, General Specification for |
| MIL-DTL-3786 Revision J:2013 | SWITCHES, ROTARY (CIRCUIT SELECTOR, LOW-CURRENT CAPACITY), GENERAL SPECIFICATION FOR |
| MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated, General Specification for |
| MIL-DTL-28827 Revision C:2011 | SWITCHES, THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| ONORM EN ISO 22476-1 : OCT 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TEST (ISO 22476-1:2012 + COR 1:2013) |
| MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
| MIL-PRF-8805 Revision G:2016 | SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR |
| IPC J STD 004 CHINESE : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-PRF-3098 Revision L:2017 | CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR |
| MIL-DTL-3950 Revision K:2016 | Switches, Toggle, Environmentally Sealed, General Specification for |
| MIL-DTL-9395 Revision K:2016 | Switches, Pressure (Absolute, Gage and Differential) General Specification for |
| MIL-PRF-27 Revision G:2014 | TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR |
| IEEE/ANSI C63.4-2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
| MIL-DTL-16225 Revision C:2010 | LOUDSPEAKER, PERMANENT MAGNET, BLASTPROOF AND SUBMERSIBLE, NAVY TYPE 49546() |
| MIL-DTL-6749 Revision B:2008 | RESISTOR, VARIABLE, WIREWOUND, NONPRECISION, AIRCRAFT POWER |
| MIL-DTL-11996 Revision C:2015 | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL-PRF-55629 Revision E:2011 | CIRCUIT BREAKERS, MAGNETIC, UNSEALED OR PANEL SEAL, TRIP-FREE, GENERAL SPECIFICATION FOR |
| MIL-DTL-12606 Revision E:2000 | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3-INCH AND 4-INCH DIAMETER CONE, 2-WATT; FUNGUS-, AND IMMERSION-RESISTANT), TYPE LS-445/U, M12606-01, AND M12606-02 |
| MIL-DTL-12632 Revision E:2016 | LOUDSPEAKERS, PERMANENT MAGNET (ENCASED, 2-WATT, FUNGUS-, GUNBLAST-, AND IMMERSION-RESISTANT), GENERAL SPECIFICATION FOR |
| W-F-1814 Revision D:2013 | FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY |
| ONORM EN ISO 22476-5 : 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST (ISO 22476-5:2012) |
| BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| MIL-DTL-10911 Revision E:2012 | LOUDSPEAKERS, PERMANENT MAGNET, (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-INCH DIAMETER CONES), GENERAL SPECIFICATION FOR |
| PD ISO/TS 14033:2012 | Environmental management. Quantitative environmental information. Guidelines and examples |
| MIL-DTL-24317 Revision B:2010 | SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
| MIL-F-18327 Revision F:2008 | FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR |
| PD ISO/TR 26762:2008 | Natural gas. Upstream area. Allocation of gas and condensate |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| BS EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| UNE-EN 16421:2015 | Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
| UNE 179008:2016 | Quality management system for liver transplantation units |
| I.S. EN ISO 9073-15:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY |
| 17/30321076 DC : 0 | BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| 15/30318290 DC : 0 | BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| 15/30328933 DC : 0 | BS EN 9100 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| 12/30259670 DC : 0 | BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| UNI EN 4650 : 2011 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| 16/30339586 DC : 0 | BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| 14/30303365 DC : 0 | BS ISO/ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV |
| SAE AS 9100D : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| BS EN ISO 22476-7:2012 | Geotechnical investigation and testing. Field testing Borehole jack test |
| ANSI CGATS/ISO 15790 : 2005(R2007) | GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY |
| 17/30347919 DC : 0 | BS ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| BS ISO 15589-1 : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES |
| MIL-DTL-13625 Revision G:2017 | SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| PD CEN/CLC ISO/IEC TS 17021-3:2016 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of quality management systems |
| 07/30162524 DC : 0 | BS ISO 7971-2 - CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| 04/30054528 DC : DRAFT APR 2004 | ISO 19922 - SHIPS AND MARINE TECHNOLOGY - FIRE RESISTANCE OF PIPELINE COMPONENTS FOR METALLIC PIPING SYSTEMS - REQUIREMENTS ON THE TEST BENCH |
| MIL-STD-705 Revision D:2016 | MOBILE ELECTRIC POWER SYSTEMS |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| BS ISO 15378 : 2006 AMD 17315 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
| BS ISO 16762:2016 | Graphic technology. Post-press. General requirements for transfer, handling and storage |
| DD CEN ISO/TS 29001:2011 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| 05/30066638 DC : DRAFT OCT 2005 | EN 15424 - STERILIZATION OF MEDICAL DEVICES - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF STERILIZATION PROCESSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE |
| BS EN ISO 9073-15:2008 | Textiles. Test methods for nonwovens Determination of air permeability |
| UNE-EN ISO 22476-5:2014 | Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012) |
| 11/30244091 DC : 0 | BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-PRF-15733 Revision J:2010 | FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR |
| BS ISO 14470:2011 | Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| UNI CEI EN 16001 : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| CSA C392 : 2011 : INC : UPD 1 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| 07/30169952 DC : DRAFT AUG 2007 | ISO 9073-5 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| 14/30298856 DC : 0 | BS EN 9133 - AEROSPACE SERIES - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| BS ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| 14/30262728 DC : 0 | BS ISO 9000 - QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| MIL-DTL-7703 Revision F:2010 | Guard, Switch, General Specification for |
| MIL-DTL-39028 Revision F:2013 | CAPACITORS, PACKAGING OF |
| 08/30172145 DC : DRAFT FEB 2008 | BS EN 16001 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| 04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-DTL-75 Revision K:2007 | ELECTRON TUBES, PACKAGING OF |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| DIN EN ISO 22476-12:2009-10 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM) |
| CSA ISO TS 16949 : 2009 : R2015 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| 04/30075589 DC : DRAFT JUL 2004 | BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS |
| 06/30058083 DC : DRAFT FEB 2006 | BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES |
| CEI EN 60469 : 2014 | TRANSITIONS, PULSES AND RELATED WAVE FORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| RG.AERO 00085 : 0 | QUALITY SYSTEM APPLICABLE TO THE AEROSPACE FIELD - MODEL FOR QUALITY ASSURANCE OF RETAILER, DISTRIBUTOR, STOCKIST SERVICES |
| IPC 9194 : 0 | IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) APPLIED TO PRINTED BOARD ASSEMBLY MANUFACTURE GUIDELINE |
| MIL-PRF-22 Revision E:2007 | RESISTOR, VARIABLE, WIREWOUND, POWER TYPE, GENERAL SPECIFICATION FOR |
| PREN 9133 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN 15358 : 2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| I.S. EN 16421:2014 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
| IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| ISO/TR 26762:2008 | Natural gas — Upstream area — Allocation of gas and condensate |
| ISO 9004:2018 | Quality management — Quality of an organization — Guidance to achieve sustained success |
| BS EN 62209-2:2010 | Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 22476-5:2012 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST (ISO 22476-5:2012) |
| ISO/TS 14033:2012 | Environmental management Quantitative environmental information Guidelines and examples |
| AAMI ISO 11737-2 : 2009 : R2014 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| I.S. EN IEC 60068-3-5:2018 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| AAMI ISO 11737-2 :2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| BIS IS/ISO 13936-1 : 2004 | TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 1: FIXED SEAM OPENING METHOD |
| I.S. EN 62047-25:2016 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 25: SILICON BASED MEMS FABRICATION TECHNOLOGY - MEASUREMENT METHOD OF PULL-PRESS AND SHEARING STRENGTH OF MICRO BONDING AREA |
| ISO 15790:2004 | Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty |
| EN IEC 60068-3-6:2018/AC:2018-05 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
| AAMI ISO 11737-1 : 2006 : R2011 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| S.R. CEN/TR 16988:2016 | ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI EN ISO 22476-4 : 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 4: MENARD PRESSUREMETER TEST |
| UNI CEI ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEM |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| ASTM D 6537 : 2000 : R2006 | Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance |
| ASTM E 3024/E3024M : 2016 | Standard Practice for Magnetic Particle Testing for General Industry |
| UNE-EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ASTM D 6537 : 2000 | Standard Practice for Instrumented Package Shock Testing for Determination of Package Performance |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| ISO 13935-1:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method |
| DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| DIN EN 14343:2006-11 | ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE |
| UNE-EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| BS EN ISO 11737-2:2009 | Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| IEC 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 25178-70:2014 | Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| BS EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers Evaluation of conformity and sampling |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 14343:2005 | Rotary positive displacement pumps. Performance tests for acceptance |
| UNE-EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| I.S. EN 14704-3:2006 | DETERMINATION OF THE ELASTICITY OF FABRICS - PART 3: NARROW FABRICS |
| DIN EN ISO 7971-2:2010-01 | CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 295-2:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 14704-1:2005 | DETERMINATION OF THE ELASTICITY OF FABRICS - PART 1: STRIP TESTS |
| UNI EN 12668-1 : 2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS |
| I.S. EN ISO 13935-1:2014 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
| I.S. EN ISO 14160:2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 14704-2:2007 | DETERMINATION OF THE ELASTICITY OF FABRICS - PART 2: MULTIAXIAL TESTS |
| I.S. EN ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
| I.S. EN ISO 13935-2:2014 | TEXTILES - TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| I.S. EN 12668-1:2010 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC EXAMINATION EQUIPMENT - PART 1: INSTRUMENTS |
| I.S. EN ISO 13934-1:2013 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
| I.S. EN ISO 17662:2016 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| UNI EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| VDI/VDE 2631 Blatt 2:2014-06 | Form measurement - Verification of the signal transmission chain |
| VDI/VDE 2631 Blatt 8:2013-09 | Form measurement - Stability monitoring of form measuring systems |
| VDI/VDE/DGQ/DKD 2622 Blatt 15.1:2011-10 | Calibration for measuring equipment for electrical quantities - Artificial mains networks |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE/DGQ/DKD 2622 Blatt 10:2004-06 | Calibration of measurement equipments for electrical quantities - High-frequency fieldstring meters |
| VDI/VDE/VDMA 2632 Blatt 2:2015-10 | Machine vision - Guideline for the preparation of a requirement specification and a system specification |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 | Calibration of measuring equipment for electrical quantities - Fundamentals |
| I.S. EN ISO 15589-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE SYSTEMS - PART 1: ON-LAND PIPELINES (ISO 15589-1:2015) |
| DIN EN 12668-1:2010-05 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| 15/30329378 DC : 0 | BS EN 9110 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| UNI EN ISO 22476-1 : 2012 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TEST |
| 08/30135847 DC : DRAFT AUG 2008 | BS ISO 9004 - MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-PRF-12934 Revision L:2009 | Resistor, Variable, Wirewound, Precision General Specification for |
| TP 127 : 2017 | METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY DENSITY OF ASPHALT BINDER USING THE BINDER FRACTURE ENERGY (BFE) TEST |
| BS EN 9137:2012 | Quality management systems. Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System |
| MIL-PRF-572 Revision H:2015 | CORDS, YARNS AND MONOFILAMENTS ORGANIC SYNTHETIC FIBER |
| BS EN ISO 9004:2018 | Quality management. Quality of an organization. Guidance to achieve sustained success |
| BS EN 15358:2011 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| 16/30330102 DC : 0 | BS ISO 16762 - GRAPHIC TECHNOLOGY - POST PRESS - GENERAL REQUIREMENTS FOR TRANSFER, HANDLING AND STORAGE |
| BS ISO 11074:2005 | Soil quality. Vocabulary |
| UNE-EN ISO 17034:2017 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| PD CEN/TR 16988:2016 | Estimation of uncertainty in the single burning item test |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| FAA AC 150/5345-49 : 2007 | SPECIFICATION L-854, RADIO CONTROL EQUIPMENT |
| BS EN 16001:2009 | Energy management systems. Requirements with guidance for use |
| 04/30092984 DC : DRAFT JAN 2004 | ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| 17/30344629 DC : 0 | BS EN ISO 7971-2 - CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT |
| BS EN ISO 19901-8:2015 | Petroleum and natural gas industries. Specific requirements for offshore structures Marine soil investigations |
| SAE AS 9133 : 2016 | QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| BS ISO 7870-1:2014 | Control charts General guidelines |
| DIN EN ISO 9073-15:2008-08 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY |
| 13/30280600 DC : 0 | BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES |
| UNE-ISO/TS 9002:2017 | Quality management systems -- Guidelines for the application of ISO 9001:2015 |
| BS EN 60469:2013 | Transitions, pulses and related waveforms. Terms, definitions and algorithms |
| BS ISO 15790:2004 | Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty |
| AQAP 2131 : 2017 | NATO QUALITY ASSURANCE REQUIREMENTS FOR FINAL INSPECTION AND TEST |
| 07/30135834 DC : 0 | ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 16910-1:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - REQUIREMENTS FOR NON-DESTRUCTIVE TESTING ON RUNNING GEAR IN RAILWAY MAINTENANCE - PART 1: WHEELSETS |
| BS EN 16421:2014 | Influence of materials on water for human consumption. Enhancement of microbial growth (EMG) |
| DIN EN ISO 25178-70:2014-06 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| EN IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| SAE ARP 5812 : 2017 | ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE |
| BS PD ISO/TR 14969 : 2004 AMD 15958 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| ASTM E 170 : 2017 : REDLINE | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| MIL-DTL-6807 Revision F:2012 | Switches, Rotary, Selector Power, General Specification for |
| 10/30219236 DC : DRAFT DEC 2010 | BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| BS EN 16653:2015 | Rubber or plastics-coated fabrics. Determination of stitch tear resistance (using a needle). Test method |
| AECTP-100 : 2016 | ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL |
| BS EN 16910-1:2018 | Railway applications. Rolling stock. Requirements for non-destructive testing on running gear in railway maintenance Wheelsets |
| PD CEN/TR 15592:2007 | Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| MIL-DTL-15291 Revision G:2013 | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
| UNE-EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD ISO/TS 16949:2009 | Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| 12/30271063 DC : 0 | PD ISO/IEC/TS 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| S.R. CEN TR 15592:2007 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT |
| AAMI ISO TIR 14969 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| MIL-DTL-55116 Revision D:2013 | CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR |
| BS EN ISO 9073-16:2008 | Textiles. Test methods for nonwovens Determination of resistance to penetration by water (hydrostatic pressure) |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| MIL-PRF-23269 Revision H:2016 | CAPACITOR, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-49465 Revision C:2007 | RESISTOR, FIXED, METAL ELEMENT, POWER TYPE, VERY LOW RESISTANCE VALUES, GENERAL SPECIFICATION FOR |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| MIL-PRF-83446 Revision D:2015 | COILS, RADIO-FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR |
| MIL-PRF-26 Revision H:2006 | RESISTOR, FIXED, WIREWOUND (POWER TYPE), GENERAL SPECIFICATION FOR |
| I.S. EN 60469:2013 | TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV)) |
| 14/30257644 DC : 0 | BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| BS EN ISO 25178-70:2014 | Geometrical product specification (GPS). Surface texture: Areal Material measures |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-PRF-22097 Revision J:2007 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, GENERAL SPECIFICATION FOR |
| DIN EN 16001 E : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| I.S. EN ISO 9073-5:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| MIL-PRF-39019 Revision F:2010 | Circuit Breakers, Magnetic, Low-Power Sealed, Trip-Free General Specification for |
| UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| NF EN 60861 : 2008 | EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS |
| CSA C392 : 2011 : R2016 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| BS EN 60068-3-5:2002 | Environmental testing. Guidance Confirmation of the performance of temperature chambers |
| ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| SAE ARP 5483/5 : 2013 | ROLLING ELEMENT BEARING TEST METHOD FOR RADIAL LIMIT AND FRACTURE LOAD TESTING |
| ISO 14470:2011 | Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| SAE ARP 4058 : 2017 | GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS |
| CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
| BS EN ISO 9073-18:2008 | Textiles. Test methods for nonwovens Determination of breaking strength and elongation of nonwoven materials using the grab tensile test |
| SAE ARP 5945 : 2017 | ENDURANCE TIME TEST PROCEDURES FOR SAE TYPE 1 AIRCRAFT DEICING/ANTI-ICING FLUIDS |
| CAN/CSA-ISO 11137-3:17 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06) |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 22476-4:2012 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 4: MENARD PRESSUREMETER TEST (ISO 22476-4:2012) |
| AAMI TIR56:2013(R2020) | GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES |
| CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-PRF-32560 Base Document:2016 | COIL, RADIO FREQUENCY, SURFACE MOUNT, FIXED ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| I.S. EN 15224:2016 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| UNI EN ISO 25178-70 : 2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 7971-2:2009 | Cereals Determination of bulk density, called mass per hectolitre Part 2: Method of traceability for measuring instruments through reference to the international standard instrument |
| ISO 7870-1:2014 | Control charts Part 1: General guidelines |
| ISO 17884:2004 | Ships and marine technology — Searchlights for high-speed craft |
| AQAP 2130 : 2009-11 | NATO QUALITY ASSURANCE REQUIREMENTS FOR INSPECTION AND TEST |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| I.S. EN 9137:2012 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| I.S. EN ISO 9073-16:2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE) |
| AASHTO T 314 : 2012 | METHOD OF TEST FOR DETERMINING THE FRACTURE PROPERTIES OF ASPHALT BINDER IN DIRECT TENSION (DT) |
| UNI EN ISO 22476-5 : 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST |
| ASTM E 1742/E1742M : 2018 : REDLINE | Standard Practice for Radiographic Examination |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| EN ISO 7971-2:2009 | Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009) |
| I.S. EN 16001:2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DIN EN 295-2:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| ONORM EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 14160:2011) |
| DIN EN 14276-1:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| DIN EN ISO 13934-1:2013-08 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
| BS EN ISO 13936-2:2004 | Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Fixed load method |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| ISO 19901-8:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations |
| UNE-EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| IEC 62047-25:2016 | Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area |
| UNE-EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
| ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| UNE-EN ISO 14160:2012 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| MIL-STD-981 Revision C:2010 | DESIGN, MANUFACTURING AND QUALITY STANDARDS FOR CUSTOM ELECTROMAGNETIC DEVICES FOR SPACE APPLICATIONS |
| I.S. EN ISO 11737-2:2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| ONORM EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| GEIA STD 0006 : 2008 | REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS |
| CSA ISO 19901-8 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS |
| UNI EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| ONORM EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| CSA ISO 19901-8:15 (R2020) | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations (Adopted ISO 19901-8:2014, first edition, 2014-12-01) |
| I.S. EN ISO 9000:2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| EN ISO 9073-5:2008 | Textiles - Test methods for nonwovens - Part 5: Determination of resistance to mechanical penetration (ball burst procedure) (ISO 9073-5:2008) |
| EN 16001:2009 | Energy management systems - Requirements with guidance for use |
| EN ISO 22476-12:2009 | Geotechnical investigation and testing - Field testing - Part 12: Mechanical cone penetration test (CPTM) (ISO 22476-12:2009) |
| EN ISO 15589-1:2017 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015, Corrected version 2020-11) |
| UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI EN ISO 13935-1 : 2014 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 13935-2 : 2014 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD |
| UNI EN 14343 : 2006 | ROTARY POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TESTS FOR ACCEPTANCE |
| UNI EN ISO 13934-1 : 2013 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD |
| AQAP 2120 : 2009-10 | NATO QUALITY ASSURANCE REQUIREMENTS FOR PRODUCTION |
| UNE-EN ISO 22476-4:2016 | Geotechnical investigation and testing - Field testing - Part 4: Ménard pressuremeter test (ISO 22476-4:2012) |
| 14/30292497 DC : 0 | BS EN ISO 22476-9 - GROUND INVESTIGATION AND TESTING - FIELD TESTING - PART 9: FIELD VANE TEST |
| UNI EN ISO 9073-18 : 2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST |
| MIL-DTL-55302 Revision G:2009 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
| BIS IS/ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| MIL-DTL-27715 Revision C:2014 | Circuit Breaker, Trip-Free, High Temperature, Aircraft General Specification for |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 18322:2017 | Space systems. General management requirements for space test centres |
| 13/30264511 DC : 0 | BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| MIL-DTL-12211 Revision G:2009 | Switch, Pressure |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| PREN 295-2 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| I.S. EN IEC 60068-3-6:2018 COR 2018 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
| MIL R 5757 : K | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| 09/30206982 DC : 0 | BS EN 9137 - QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN 9100:2009 QUALITY MANAGEMENT SYSTEM |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| IEC 62303:2008 | Radiation protection instrumentation - Equipment for monitoring airborne tritium |
| BS 7755-1.2:1999 | Soil quality. Terminology and classification Terms and definitions relating to sampling |
| UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| SAE ARP 5448/3 : 2016 | PLAIN BEARING LOW SPEED OSCILLATION TEST |
| I.S. CEN ISO TR 14969:2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485: 2003 |
| 10/30216987 DC : 0 | BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| MIL-C-11015 Revision F:2008 | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
| I.S. EN ISO 22476-1:2012 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TEST (ISO 22476-1:2012) |
| MIL-PRF-32222 Revision A:2016 | HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR |
| MIL-DTL-83739 Revision D:2012 | SWITCHES, ANTENNA, RADIO FREQUENCY, SOLID-STATE, GENERAL SPECIFICATION FOR |
| 16/30334735 DC : 0 | BS EN 15224 - HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
| BS IEC 60861 : 2006 | EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| I.S. EN ISO 7971-2:2009 | CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT |
| MIL-PRF-15305 Revision F:2013 | COILS, ELECTRICAL, FIXED AND VARIABLE, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL-DTL-8416 Revision C:2005 | ADAPTER, HEADSET-MICROPHONE MX-1646()/AIC |
| SAE ARP 5483/6 : 2013 | ROLLING ELEMENT BEARING TEST METHOD FOR DIMENSIONAL STABILITY |
| BS ISO 19922:2005 | Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Requirements on the test bench |
| MIL-PRF-19 Revision E:2007 | RESISTOR, VARIABLE, WIREWOUND (LOW OPERATING TEMPERATURE), GENERAL SPECIFICATION FOR |
| MIL-PRF-11021 Revision J:2016 | SWITCH, VEHICULAR LIGHTS: 28 VOLT DC |
| MIL-STD-790 Revision G:2011 | ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS |
| MIL-PRF-39023 Revision D:2006 | RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, GENERAL SPECIFICATION FOR |
| MIL-PRF-11693 Revision E:2012 | CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| 17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| 14/30273523 DC : 0 | BS EN ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| UNE-CEN/TR 15983:2011 IN | Stationary source emissions - Guidance on the application of EN 14181:2004 |
| BS ISO 10005:2005 | Quality management systems. Guidelines for quality plans |
| I.S. EN ISO 17034:2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
| PD ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| BS EN ISO 22476-4:2012 | Geotechnical investigation and testing. Field testing Ménard pressuremeter test |
| DIN EN ISO 22476-4:2013-03 | Geotechnical investigation and testing - Field testing - Part 4: M?nard pressuremeter test (ISO 22476-4:2012); German version EN ISO 22476-4:2012 |
| 07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-DTL-83733 Revision E:2006 | CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| 03/314215 DC : DRAFT OCT 2003 | ISO TR 14969 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| MIL-DTL-8834 Revision K:2016 | Switches, Toggle, Positive Break, General Specification for |
| PREN 474-11 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS |
| PD CEN/TR 16792:2014 | Safety of children\'s clothing. Recommendations for the design and manufacture of children\'s clothing. Mechanical safety |
| MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
| DD CEN/TS 15358:2006 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| EEMUA 205 : 2008 | GUIDE TO THE PRODUCTION TESTING OF VALVES FOR THE ENERGY, PROCESS AND RELATED INDUSTRIES |
| MIL-C-18312 Revision G:2013 | CAPACITOR, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR |
| BS EN 61744:2005 | Calibration of fibre optic chromatic dispersion test sets |
| NF EN ISO 22476-12 : 2010 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM) |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| CSA ISO 9004 : 2009 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| SAE AS 47643 : 2017 | VERIFICATION METHODS FOR MIL-STD-1760E AIRCRAFT STATION INTERFACES |
| UNI CEN ISO/TS 29001 : 2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| CSA ISO TR 14969 : 2005 : R2015 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| UNI EN ISO 22476-7 : 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST |
| S.R. CEN TR 15983:2010 | STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN 14181:2004 |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| DIN EN ISO 22476-7:2013-03 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST (ISO 22476-7:2012) |
| ANSI/AAMI/ISO 14160:2011(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| UNE-EN 16653:2015 | Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method |
| CSA ISO 10005 : 2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 9073-18:2008-08 | Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007) |
| CSA ISO TR 14969 :2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| BIS IS/ISO 9000 : 2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| SAE ARP 5483/1 : 2012 | ROLLING ELEMENT BEARING NO-LOAD TORQUE TEST |
| SAE ARP 986 : 2015 | GUIDE FOR QUALIFICATION TESTING OF AIRCRAFT AIR VALVES |
| I.S. EN ISO 19901-8:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS (ISO 19901-8:2014) |
| CEI UNI EN ISO 17034 : 1ED 2018 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| PREN 15224 : DRAFT 2016 | HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
| ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
| SAE ARP 5483/4 : 2013 | ROLLING ELEMENT TEST METHOD FOR AXIAL LIMIT AND FRACTURE LOAD TESTING |
| ISO/TR 230-11:2018 | Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests |
| BS EN ISO 7971-2:2009 | Cereals. Determination of bulk density, called mass per hectolitre Method of traceability for measuring instruments through reference to the international standard instrument |
| ISO 15589-1:2015 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines |
| ISO 18322:2017 | Space systems — General management requirements for space test centres |
| BS ISO 17034 : 2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| EN 16910-1:2018 | Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets |
| AQAP 2000 : 2009 | NATO POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE |
| ISO 13485 - PRACTICAL GUIDE : 2016 | ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE |
| ASTM E 2033 : 2017 : REDLINE | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO/ASTM 51649:2015 | Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV |
| EN ISO 9004:2018 | Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) |
| ISO 19922:2005 | Ships and marine technology Fire resistance of metallic pipe components with resilient and elastomeric seals Requirements imposed on the test bench |
| ISO 16762:2016 | Graphic technology Post-press General requirements for transfer, handling and storage |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 18602:2013 | Packaging and the environment — Optimization of the packaging system |
| I.S. EN ISO 15378:2017 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017) |
| IEC 60068-3-6:2018 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
| I.S. EN 62209-2:2010 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| IEC 60861:2006 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| DIN EN ISO 13935-2:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| DIN EN ISO 13935-1:2014-07 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
| DIN EN ISO 13485:2016-08 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| BS EN 12258-2:2004 | Aluminium and aluminium alloys. Terms and definitions Chemical analysis |
| BS EN 14704-1:2005 | Determination of the elasticity of fabrics Strip tests |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 22000:2005 | Food safety management systems Requirements for any organization in the food chain |
| ISO 13936-2:2004 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 9073-16:2007 | Textiles Test methods for nonwovens Part 16: Determination of resistance to penetration by water (hydrostatic pressure) |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN ISO 11737-2:2009 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| UNE-EN ISO 13485:2016 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| ISO 22476-1:2012 | Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 13936-1:2004 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method |
| ISO/IEC TS 17021-3:2013 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems |
| ISO 22476-4:2012 | Geotechnical investigation and testing Field testing Part 4: Mnard pressuremeter test |
| IEC 61744:2005 | Calibration of fibre optic chromatic dispersion test sets |
| BS EN ISO 13935-1:2014 | Textiles. Seam tensile properties of fabrics and made-up textile articles Determination of maximum force to seam rupture using the strip method |
| BS EN ISO 22000:2005 | Food safety management systems. Requirements for any organization in the food chain |
| EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| BS EN 14276-1 : 2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| UNE-EN ISO 7971-2:2010 | Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009) |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| UNE-EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| ISO 9001:2015 | Quality management systems — Requirements |
| UNE-EN ISO 13935-1:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014) |
| BS EN 14704-3:2006 | Determination of the elasticity of fabrics Narrow fabrics |
| ISO 22476-5:2012 | Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test |
| BS EN ISO 13934-1:2013 | Textiles. Tensile properties of fabrics Determination of maximum force and elongation at maximum force using the strip method |
| ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
| ISO 22476-12:2009 | Geotechnical investigation and testing Field testing Part 12: Mechanical cone penetration test (CPTM) |
| BS EN ISO 13936-1:2004 | Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Fixed seam opening method |
| ISO 17034:2016 | General requirements for the competence of reference material producers |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| ISO 9073-18:2007 | Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test |
| ISO 9073-15:2007 | Textiles Test methods for nonwovens Part 15: Determination of air permeability |
| BS EN ISO 13485:2016 | Medical devices. Quality management systems. Requirements for regulatory purposes |
| EN 14704-3:2006 | Determination of the elasticity of fabrics - Part 3: Narrow fabrics |
| EN 16602-20-07:2016 | Space product assurance - Quality and safety assurance for space test centres |
| EN ISO 13935-1:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method (ISO 13935-1:2014) |
| EN 16421:2014 | Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
| EN ISO 9073-15:2008 | Textiles - Test methods for nonwovens - Part 15: Determination of air permeability (ISO 9073-15:2007) |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| EN 14704-2:2007 | Determination of the elasticity of fabrics - Part 2: Multiaxial tests |
| EN ISO 19901-8:2015 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 8: Marine soil investigations (ISO 19901-8:2014) |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN ISO 22476-5:2012 | Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012) |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN ISO 17034:2016 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| EN ISO 13936-2:2004 | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO 13936-2:2004) |
| EN ISO 9073-16:2008 | Textiles - Test methods for nonwovens - Part 16: Determination of resistance to penetration by water (hydrostatic pressure) (ISO 9073-16:2007) |
| EN ISO 11137-3:2017 | Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017) |
| EN ISO 22476-7:2012 | Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012) |
| EN ISO 25178-70:2014 | Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) |
| EN 9137:2012 | Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN ISO 22000:2005 | Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2005) |
| EN ISO 13936-1:2004 | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method (ISO 13936-1:2004) |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN 14704-1:2005 | Determination of the elasticity of fabrics - Part 1: Strip tests |
| EN ISO 9073-18:2008 | Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007) |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| EN 16653:2015 | Rubber or plastics-coated fabrics - Determination of stitch tear resistance (using a needle) - Test method |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| EN 4650:2010 | Aerospace series - Wire and cable marking process, UV Laser |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| MIL-PRF-10304 Revision F:1999 | METERS, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED, GENERAL SPECIFICATION FOR |
| NF ISO 14470 : 2012 | FOOD IRRADIATION - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF THE PROCESS OF IRRADIATION USING IONIZING RADIATION FOR THE TREATMENT OF FOOD |
| BS EN ISO 22476-1:2012 | Geotechnical investigation and testing. Field testing Electrical cone and piezocone penetration test |
| MIL-DTL-9129 Revision G:2014 | Discharges, Electrostatic General Specification for |
| DIN EN ISO 9073-16:2009-01 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 16: DETERMINATION OF RESISTANCE TO PENETRATION BY WATER (HYDROSTATIC PRESSURE) |
| MIL-PRF-83530 Revision C:2008 | RESISTOR, VOLTAGE SENSITIVE (VARISTOR, METAL-OXIDE), GENERAL SPECIFICATION FOR |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| UNI ISO 7870-1 : 2014 | CONTROL CHARTS - PART 1: GENERAL GUIDELINES |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-DTL-23928 Revision G:2014 | PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE |
| PREN ISO 11135 : DRAFT 2011 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO/DIS 11135:2011) |
| BS EN ISO 17034:2016 | General requirements for the competence of reference material producers |
| ANSI/MSE 2000 : 2008 | A MANAGEMENT SYSTEM FOR ENERGY |
| DIN EN 16653:2015-05 | RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF STITCH TEAR RESISTANCE (USING A NEEDLE) - TEST METHOD |
| I.S. EN ISO 22476-7:2012 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 7: BOREHOLE JACK TEST (ISO 22476-7:2012) |
| MIL-DTL-25547 Revision C:2002 | LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13 |
| CAN/CSA-ISO 13485:16 | Medical devices - Quality management systems - Requirements for regulatory purposes (Adopted ISO 13485:2016, third edition, 2016-03-01) |
| I.S. CEN TS 15358:2006 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| MIL-PRF-83287 Revision G:2007 | INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR |
| 18/30358588 DC : 0 | BS EN ISO 29001 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| 03/315684 DC : DRAFT SEP 2003 | ISO 10019 - GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES |
| AAMI TIR56 : 2013 | GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES |
| 15/30329382 DC : 0 | BS EN 9120 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
| 16/30343033 DC : 0 | BS ISO/IEC 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| 06/30148429 DC : DRAFT JULY 2006 | ISO 9073-17 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 17: EVALUATION OF WATER PENETRATION (SPRAY IMPACT TEST) |
| MIL-DTL-5757 Revision N:2017 | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| DIN EN 15224:2016-04 (Draft) | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| 14/30296140 DC : 0 | BS EN 62047-25 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 25: SILICON-BASED MEMS FABRICATION TECHNOLOGY - MEASUREMENT METHOD OF PULL-PRESS AND SHEARING STRENGTH OF MICRO BONDING AREA |
| PD CEN ISO/TR 14969:2005 | Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 |
| MIL R 19365 : E | RESISTOR, ADJUSTABLE, WIREWOUND, POWER |
| MIL-PRF-22684 Revision F:2006 | RESISTOR, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR |
| UNE-CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| BIS IS/ISO 13936-2 : 2004 | TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 2: FIXED LOAD METHOD |
| BS PD ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| MIL-PRF-49137 Revision E:2014 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Molded, Conformal Coated and Metal Cased with Plastic End-Fill, Nonhermetically Sealed, General Specification for |
| ISO/ASTM 52628:2013 | Standard practice for dosimetry in radiation processing |
| BS EN ISO 22476-12:2009 | Geotechnical investigation and testing. Field testing Mechanical cone penetration test (CPTM) |
| MIL-PRF-39010 Revision E:1997 | Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for |
| 03/102285 DC : DRAFT SEP 2003 | BS ISO 21247 - QUALITY PLANS FOR PRODUCT ACCEPTANCE - COMBINED ACCEPT-ZERO AND CONTROL PROCEDURES |
| MIL R 93 : F | RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR |
| 04/30079743 DC : DRAFT APR 2004 | ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CSA ISO 10005 : 2005 : R2010 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| 16/30344611 DC : 0 | BS ISO 7870-1 - CONTROL CHARTS - PART 1: GENERAL GUIDELINES |
| CSA ISO TR 14969 : 2005 : R2010 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| BS ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| CEI EN 62047-25 : 1ED 2017 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 25: SILICON BASED MEMS FABRICATION TECHNOLOGY - MEASUREMENT METHOD OF PULL-PRESS AND SHEARING STRENGTH OF MICRO BONDING AREA |
| CSA ISO 10005 : 2005 : R2015 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| UNE-EN 15224:2017 | Quality management systems - EN ISO 9001:2015 for healthcare |
| I.S. EN 60861:2008 | EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS |
| I.S. EN 61744:2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| SAE AS 5502 : 2016 | STANDARD REQUIREMENTS FOR AEROSPACE SEALANTS AND ADHESION PROMOTERS |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| MIL-DTL-3432 Revision J:2009 | CABLES, (POWER AND SPECIAL PURPOSE) AND WIRE, ELECTRICAL (300 AND 600 VOLTS) |
| AQAP 2110 : 2016 | NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION |
| UNI EN ISO 22476-12 : 2009 | GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST (CPTM) |
| MIL-DTL-38159 Revision D:2015 | CONNECTORS, ELECTRIC, RAMP POWER, 416/240 VOLTS |
| UNI EN ISO 9073-5 : 2009 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 5: DETERMINATION OF RESISTANCE TO MECHANICAL PENETRATION (BALL BURST PROCEDURE) |
| MIL-S-4040 Revision G:2012 | Solenoid, Electrical General Specification for (No S/S Document) |
| MIL-DTL-83505 Revision C:2017 | SOCKETS, (LEAD, ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR |
| MIL-PRF-1 Revision N:2011 | ELECTRON TUBES - GENERAL SPECIFICATION FOR |
| UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
| MIL-PRF-15160 Revision L:2018 | Fuses, Instrument, Power, and Telephone General Specification for |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| DIN EN 16421:2015-05 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
| CSA ISO 9004 : 2009 : R2015 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| CSA ISO 10005 : 2005 : R2010 : FR | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| IEEE 1528-2013 REDLINE | IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
| SAE AS 83519 : 2015 | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
| ISO/ASTM 51956:2013 | Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing |
| DIN EN ISO 9004:2009-12 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| ANSI/AAMI/ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
| UNI EN 16421 : 2015 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
| PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| UNI EN ISO 9073-15 : 2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 15: DETERMINATION OF AIR PERMEABILITY |
| DIN EN ISO 11737-1:2009-09 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| UNE 179002:2018 | Health services. Quality management system for health care transport organization. |
| I.S. ISO 10019:2005 | GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES |
| I.S. EN 16653:2015 | RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF STITCH TEAR RESISTANCE (USING A NEEDLE) - TEST METHOD |
| I.S. EN ISO 9004:2009 | QUALITY MANAGEMENT - QUALITY OF AN ORGANIZATION - GUIDANCE TO ACHIEVE SUSTAINED SUCCESS (ISO 9004:2018) |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| S.R. CEN/CLC/ISO/IEC/TS 17021-3:2016 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013) |
| AAMI ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| S.R. ISO/TS 9002:2016 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2015 |
| I.S. EN 4650:2010 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| NF EN 9137 : 2012 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| ONORM EN ISO 11737-1 : 2011 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| UNI EN ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| AQAP 2310 : 2017 | NATO QUALITY ASSURANCE REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE SUPPLIERS |
| S.R. CEN ISO TS 29001:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| UNI EN ISO 7971-2 : 2009 | CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 2: METHOD OF TRACEABILITY FOR MEASURING INSTRUMENTS THROUGH REFERENCE TO THE INTERNATIONAL STANDARD INSTRUMENT |
| BS EN ISO 15589-1:2017 | Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline systems On-land pipelines |
| ONORM EN ISO 11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| UNI EN 9137 : 2012 | QUALITY MANAGEMENT SYSTEMS - GUIDANCE FOR THE APPLICATION OF AQAP 2110 WITHIN AN EN 9100 QUALITY MANAGEMENT SYSTEM |
| UNE-EN 9137:2012 | Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| ASTM F 3278 : 2017 | Standard Performance Specification for Hand-Held Metal Detectors Used in Safety and Security |
| NF EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| IWA 2:2007 | Quality management systems Guidelines for the application of ISO 9001:2000 in education |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| UNE-EN ISO 11737-2:2010 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| BS EN ISO 11137-3:2017 | Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| ISO 22476-7:2012 | Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test |
| BS EN ISO 17662:2016 | Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN ISO 9001:2015 | Quality management systems. Requirements |
| BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| IEC 62209-2:2010 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| CEN/TS 15358:2006 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| EN 61744:2005 | Calibration of fibre optic chromatic dispersion test sets |
| DIN EN 14704-3:2007-03 | DETERMINATION OF THE ELASTICITY OF FABRICS - PART 3: NARROW FABRICS |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| DIN EN 14704-1:2005-07 | DETERMINATION OF THE ELASTICITY OF FABRICS - PART 1: STRIP TESTS |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| DIN EN ISO 13935-2:1999-04 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN ISO 13936-2:2004-07 | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO 13936-2:2004) |
| EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| DIN EN ISO 13935-1:1999-04 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
| DIN EN 16001:2009-08 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| EN 62209-2:2010 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| EN 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| CSA ISO 9000 : 2016 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| ONORM EN ISO 9073-18 : 2008 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 18: DETERMINATION OF BREAKING STRENGTH AND ELONGATION OF NONWOVEN MATERIALS USING THE GRAB TENSILE TEST |
| DSCC 03024 : C | SHIELDING BEAD, ELECTRONIC, CHIP, FERRITE, HIGH RELIABILITY |
| JEDEC JESD557D:2023 | Statistical Process Control Systems |
| UNE-EN 14276-1:2007 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO/TR 13425:2006 | Guidelines for the selection of statistical methods in standardization and specification |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| SA HB 13485:2020 | AS ISO 13485:2017 - Medical devices - A practical guide |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| OIML D 10 : 2007 | GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.