IPC J STD 075 : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CLASSIFICATION OF NON-IC ELECTRONIC COMPONENTS FOR ASSEMBLY PROCESSES
Hardcopy
15-09-2023
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 GENERAL
1.1 Scope
1.2 Purpose
1.3 Definitions
1.4 General Requirements
1.4.1 Agreements
1.4.2 Definition of Requirements
1.4.3 Measurement Units and Applications
2 APPLICABLE DOCUMENTS
2.1 IPC
2.2 Joint Industry Standards
3 SOLDERABILITY
4 PROCESS
4.1 Process Sensitivity Classification
4.2 PSL Reclassification
4.3 PSL Evaluation
4.4 MSL Bake Out
5 PSL CLASSIFICATION
6 NUMBER OF PASSES/REFLOWS
7 REWORK
8 FLUX
9 CLEANING
10 BASE SOLDER PROCESS CONDITIONS - WAVE
11 BASE SOLDER PROCESS CONDITIONS - REFLOW
12 MSL CLASSIFICATION AND LABELING/PACKING
13 PSL LABELING
Represents maximum process sensitivity levels and do not establish rework conditions or recommended processes for an assembler. Also outlines a process to classify and label non-semiconductor electronic component's Process Sensitivity Level (PSL) and Moisture Sensitivity Level (MSL) consistent with the semiconductor industry's classification levels (J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Devices and J-STD-033, Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices).
| DevelopmentNote |
Jointly published by ECA, IPC & JEDEC. Included in IPC C 103 & IPC C 1000. Supersedes IPC 9503. (09/2008) Also available in German Language, See J STD 075 GERMAN. (04/2009) Also available in Chinese Language, See J STD 075 CHINESE. (10/2010)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
Institute of Printed Circuits
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| BS EN 60068-2-58 : 2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| 17/30357139 DC : 0 | BS EN 61760-4 + A1 - SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| IPC 7801 : 0 | REFLOW OVEN PROCESS CONTROL STANDARD |
| IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
| IPC J STD 001 SWEDISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 DANISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 RUSSIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 SPANISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 TURKISH : E2010 | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 POLISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 ROMANIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC 7092 : 0 | DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR EMBEDDED COMPONENTS |
| IPC A 610 CZECH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 GERMAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 HINDI : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 033 CHINESE : B-1 | HANDLING, PACKING, SHIPPING AND USE OF MOISTURE/REFLOW SENSITIVE SURFACE MOUNT DEVICES |
| IPC A 610 ESTONIAN : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 POLISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 DUTCH : F2014 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 KOREAN : F2014 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 ITALIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 FRENCH : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 HUNGARIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 GERMAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC A 610 SWEDISH : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 033 GERMAN : C | HANDLING, PACKING, SHIPPING, AND USE OF MOISTURE/REFLOW AND/OR PROCESS SENSITIVE COMPONENTS |
| IPC A 610 HUNGARIAN : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 CHINESE : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 TURKISH : E2010 | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 JAPANESE : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 001 ROMANIAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 DANISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| IPC A 610 RUSSIAN : D | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC A 610 VIETNAMESE : E | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC 1756 : 2010 | MANUFACTURING PROCESS DATA MANAGEMENT |
| IPC J STD 001 CHINESE : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 SPANISH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 FRENCH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| EN 61760-4:2015/A1:2018 | SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES (IEC 61760-4:2015/A1:2018) |
| GEIA STD 0006 : 2008 | REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS |
| IPC J STD 020 CHINESE : D-1 | MOISTURE/REFLOW SENSITIVITY CLASSIFICATION FOR NONHERMETIC SURFACE MOUNT DEVICES |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| I.S. EN 61760-4:2015 | SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| I.S. EN 60068-2-58:2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| EN 60068-2-58:2015/A1:2018 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) (IEC 60068-2-58:2015/A1:2017) |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC J STD 033C-1:2014 | HANDLING, PACKING, SHIPPING AND USE OF MOISTURE, REFLOW, AND PROCESS SENSITIVE DEVICES |
| IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| IPC J STD 002 : D | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.