INCITS/ISO/IEC 15457-3 : 2002 : R2007
Current
The latest, up-to-date edition.
IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
Hardcopy , PDF
English
01-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Test methods for physical characteristics
4.1 General
4.1.1 Reference
4.1.2 Apparatus
4.1.3 Sampling preparation and storage of
samples
4.1.4 Conditioning and testing environment
4.1.5 Test report
4.2 Dimensions (except thickness)
4.2.1 Reference
4.2.2 Principle
4.2.3 Procedure
4.3 Thickness
4.3.1 Reference
4.3.2 Apparatus
4.3.3 Procedure
4.4 Separation force
4.4.1 Reference
4.4.2 Principle
4.4.3 Apparatus
4.4.4 Procedure
4.4.5 Expression of result
4.5 Reel winding
4.5.1 Reference
4.5.2 Apparatus
4.5.3 Procedure
4.6 Bursting strength
4.6.1 Reference
4.6.2 Procedure
4.7 Stiffness
4.7.1 Reference
4.7.2 Procedure
4.8 Folding endurance
4.8.1 Reference
4.8.2 Apparatus
4.8.3 Procedure
4.9 Ash content
4.9.1 Reference
4.9.2 Procedure
4.10 Smoothness
4.10.1 Reference
4.10.2 Procedure
4.11 Opacity (paper backing) and opacity (700-1000 nm)
4.11.1 Reference
4.11.2 Procedure
4.12 Coefficient of friction and destacking force
4.12.1 Reference
4.12.2 Procedure
4.13 Reflectance factor
4.13.1 Reference
4.13.2 Procedure
4.14 Air permeance
4.14.1 Reference
4.14.2 Procedure
4.15 Sizing and pen-writing factor
4.15.1 Reference
4.15.2 Principle
4.15.3 Apparatus and reagents
4.15.4 Preparation of test pieces
4.15.5 Procedure
4.15.6 Expression of results
4.16 Tear resistance
4.16.1 Reference
4.16.2 Procedure
4.17 Delamination resistance
4.17.1 Reference
4.17.2 Principle
4.17.3 Apparatus
4.17.4 Preparation for test
4.17.5 Procedure
4.17.6 Expression of results
4.17.7 Test report
4.18 Cold-crack temperature (brittleness)
4.18.1 Reference
4.18.2 Procedure
4.18.3 Expression of results
5 Test methods for magnetic stripe physical
characteristics
5.1 Preparation and storage of samples
5.2 Conditioning and test environments
5.3 Protrusion
5.3.1 Reference
5.3.2 Principle
5.3.3 Apparatus
5.3.4 Procedure
5.4 Profile deviation
5.4.1 Reference
5.4.2 Principle
5.4.3 Procedure
5.5 Roughness R[a] and R[z]
5.5.1 Reference
5.5.2 Principle
5.5.3 Procedure
5.6 Warpage
5.6.1 Reference
5.6.2 Procedure
5.7 Adherence
5.7.1 Reference
5.7.2 Apparatus
5.7.3 Procedure
5.8 Wear test
5.8.1 Reference
5.8.2 Principle
5.8.3 Procedure
5.9 Dimensional measurement of the magnetic stripe
5.9.1 Principle
5.9.2 Procedure
6 Test methods for static magnetic characteristics
6.1 Principle
6.2 Apparatus
6.3 Preparation and storage of sample
6.3.1 Preparation
6.3.2 Storage
6.3.3 Conditioning and testing environment
6.4 Procedure
6.4.1 VSM
6.4.2 HM
6.5 Expression of results
6.6 Coercivity, H[CM]
6.6.1 Reference
6.6.2 Procedure
6.7 Squareness, SQ
6.7.1 Reference
6.7.2 Procedure
6.8 Switching field distribution, (SF[D])
6.8.1 Reference
6.8.2 Procedure
6.9 Test report
7 Test method for dynamic magnetic characteristics
7.1 Principle
7.2 Reference cards
7.3 Apparatus
7.3.1 Measuring instrument for classes L and S
7.3.2 Measuring instrument for class H
7.4 Preparation and preservation of test samples
7.4.1 Preparation
7.4.2 Preservation
7.4.3 Conditioning and testing environment
7.5 Test procedure
7.5.1 Test densities (D[max] and D[min])
7.6 Expression of results
7.6.1 Resolution
7.6.2 Modulation
7.7 Test report
Bibliography
Describes the use of thin flexible cards, which are used to automate the controls for access to goods or services such as mass transit, highway toll systems, car parks, vouchers, stored value, etc.
| DocumentType |
Standard
|
| Pages |
38
|
| ProductNote |
Reconfirmed 2007
|
| PublisherName |
Information Technology Industry Council
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO/IEC 15457-3:2008 | Identical |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO 4094:2005 | Paper, board and pulps International calibration of testing apparatus Nomination and acceptance of standardizing and authorized laboratories |
| ISO 5629:1983 | Paper and board Determination of bending stiffness Resonance method |
| ISO/IEC 15457-1:2008 | Identification cards — Thin flexible cards — Part 1: Physical characteristics |
| ISO 5626:1993 | Paper Determination of folding endurance |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| ISO/IEC 7811-6:2014 | Identification cards Recording technique Part 6: Magnetic stripe High coercivity |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO/IEC 7811-1:2014 | Identification cards Recording technique Part 1: Embossing |
| ISO 8570:1991 | Plastics Film and sheeting - Determination of cold-crack temperature |
| ISO 4677-1:1985 | Atmospheres for conditioning and testing Determination of relative humidity Part 1: Aspirated psychrometer method |
| CR 13875:2000 | Identification card systems - Intersector thin flexible cards - Security features |
| ISO 5627:1995 | Paper and board — Determination of smoothness (Bekk method) |
| EN 25651 : 1993 | PAPER, BOARD AND PULPS - UNITS FOR EXPRESSING PROPERTIES |
| ISO 2144:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 900 degrees C |
| ISO 284:2012 | Conveyor belts — Electrical conductivity — Specification and test method |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 8226-2:1990 | Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 % |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| ISO 1831:1980 | Printing specifications for optical character recognition |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| CR 13909:2000 | Identification card systems - Intersector thin flexible cards - Acceptance criteria |
| ISO/IEC 15457-2:2007 | Identification cards — Thin flexible cards — Part 2: Magnetic recording technique |
| ISO 8295:1995 | Plastics Film and sheeting Determination of the coefficients of friction |
| ISO 6383-2:1983 | Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
| ISO/IEC 10373-3:2010 | Identification cards Test methods Part 3: Integrated circuit cards with contacts and related interface devices |
| ISO 4593:1993 | Plastics Film and sheeting Determination of thickness by mechanical scanning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.