IEEE DRAFT C50.12 : D10 2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
SALIENT-POLE 50 AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE
17-10-2023
12-01-2013
1 Scope
2 References
3 Definitions
3.1 Cooling Classification
3.2 Coolant Types
4 Operational Requirements
4.1 Service Conditions and Steady State Duty
4.2 Transient Event and Emergency Duty Requirements
4.3 Service Environment
5 Rating and Performance Characteristics
5.1 Output Rating
5.2 Capability
5.3 Stator Voltage Rating
5.4 Power Factor and Reactive Power Capability
5.5 Rotor Voltage Rating
5.6 Short Circuit Ratio
5.7 Transient and Subtransient Reactances
5.8 Voltage Wave Shape
5.9 Torques
6 Insulation systems
6.1 Insulation Systems Defined
6.2 Classes of Insulation Systems
6.3 The Use of Different Classes of Insulation Systems
7 Temperatures and Temperature Limits
7.1 Temperature Limits
7.2 Methods of Temperature Determination
7.3 Locations of Embedded Temperature Detectors
7.4 Location of Coolant Temperature Detectors
8 Efficiency
8.1 Methods
8.2 Reference Conditions
8.3 Types of Losses
8.4 Test Tolerance
9 Tests
9.1 Categories and Scope of Tests
9.2 Test Procedural Requirements
9.3 Heat Exchanger Testing
9.4 Testing High Voltage Terminal Bushings
10 Marking
10.1 Nameplates
10.2 Other marking
10.3 Terminal marking
Annex A (informative) Bibliography
Annex B (normative) TIF Weighting Factors
Provides requirements for all types of 50 hertz and 60 hertz salient-pole synchronous generators and generator/motors rated 5 MVA and above to be used for hydraulic turbine or hydraulic pump/turbine applications.
| DocumentType |
Draft
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| SupersededBy |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| ISO 7919-5:2005 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants |
| IEEE 1310-2012 REDLINE | IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Rotating Machines |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 1434-2014 | IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEEE 43-2013 REDLINE | IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery |
| IEEE 286-2000 | IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.