IEEE C50.13-2014
Current
The latest, up-to-date edition.
IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above
Hardcopy , PDF
English
09-05-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Classification
2.1 Stator Types
2.2 Rotor Types
3 Usual Service Conditions
3.1 Variation from Rated Voltage
3.2 Variation from Rated Hydrogen Pressure
3.3 Variation from Rated Frequency
4 Rating
4.1 Output Rating
4.2 Capability
4.3 Voltage Ratings
4.3.1 Armature
4.3.2 Excitation System Voltage Ratings
5 Temperature Rise
5.1 Air-Cooled Machines
5.2 Hydrogen-Cooled Machines
6 Requirements for Abnormal Conditions
6.1 Armature Winding Short-Time Thermal Requirements
6.2 Field Winding Short-Time Thermal Requirements
6.3 Rotor Short-Time Thermal Requirements for Unbalanced
Faults
6.4 Mechanical Requirements for Short Circuits
6.5 Continuous Unbalance Requirements
7 Efficiency
8 Overspeed
9 Telephone Influence Factor
9.1 Balanced
9.2 Residual Component
9.3 Single Frequency
9.4 Other
10 Tests
11 Direction of Rotation
12 Nameplate Marking
13 Performance Specification Forms
14 Revision of American National Standards Referred to
in This Document
Tables
1 - Limiting Observable Temperature Rise of Air-Cooled
Cylindrical-Rotor Generators
2 - Limiting Observable Temperature and Temperature Rise
of Hydrogen-Cooled Cylindrical-Rotor Generators in
Degrees Celsius
3 - 1960 Single-Frequency TIFf Weighting Factors
4 - Tests on Cylindrical-Rotor Synchronous Generators
Figures
1 - Performance Specification Form for Steam,
Hydraulic-Turbine-Driven, and Motor-Driven Air-Cooled
Cylindrical Rotor Synchronous Generators
2 - Performance Specification Form for Steam-Turbine-Driven
Hydrogen-Cooled Cylindrical-Rotor Synchronous
Generators
Applies to 60-hertz generators, except those in ANSI C50.14-1977. All requirements and definitions, except those in this standard, shall be in accordance with ANSI C50.10-1977.
| Committee |
Electric Machinery
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-9068-6
|
| Pages |
63
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE 421.4-2014 | IEEE Guide for the Preparation of Excitation System Specifications |
| IEEE DRAFT 434 : D10 2006 | FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE |
| IEEE DRAFT C62.92.2 : 1999 | DRAFT GUIDE FOR THE APPLICATION OF NEUTRAL GROUNDING IN ELECTRICAL UTILITY SYSTEMS, PART 2 - GROUNDING OF SYNCHRONOUS GENERATOR SYSTEMS |
| API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
| IEEE DRAFT C37.102 : D8 2006 | AC GENERATOR PROTECTION |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| ANSI C50.10 : 1990 | ROTATING ELECTRICAL MACHINERY - SYNCHRONOUS MACHINES |
| IEEE 1129-2014 | IEEE Guide for Online Monitoring of Large Synchronous Generators (10 MVA and Above) |
| IEEE 1547-2018 | IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces |
| IEEE 45.1-2023 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
| IEEE 1110-2019 | IEEE Guide for Synchronous Generator Modeling Practices and Parameter Verification with Applications in Power System Stability Analyses |
| IEEE 56-2016 | IEEE Guide for Insulation Maintenance of Electric Machines |
| IEEE C57.116-2014 | IEEE Guide for Transformers Directly Connected to Generators |
| IEEE 45.1-2017 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
| IEEE C62.92.2-2017 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II--Synchronous Generator Systems |
| IEEE C37.106-2022 | IEEE Guide for Abnormal Frequency Protection for Power Generating Plants |
| IEEE 115-2019 | IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis |
| IEEE 421.2-2014 | IEEE Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems |
| IEEE 1812-2023 REDLINE | IEEE Guide for Testing Permanent Magnet Machines |
| IEEE C57.116-2022 | IEEE Guide for Transformers Directly Connected to Generators |
| IEEE 421.3-2016 | IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| IEEE 1-2000 | IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation |
| ANSI C50.10 : 1990 | ROTATING ELECTRICAL MACHINERY - SYNCHRONOUS MACHINES |
| IEEE 67-2005 | IEEE Guide for Operation and Maintenance of Turbine Generators |
| IEEE 522-2004 | IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines |
| IEEE 62.2-2004 | IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 433-2009 REDLINE | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency |
| IEEE 43-2013 REDLINE | IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery |
| IEEE 421.1-2007 | IEEE Standard Definitions for Excitation Systems for Synchronous Machines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.