IEEE C37.102-2006 REDLINE
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
IEEE Guide for AC Generator Protection
30-03-2023
English
16-02-2007
1 Scope
1.1 Description of the guide
2 Normative references
3 Description of generators, excitation systems, and generating
station arrangements
3.1 Generator winding design and arrangements
3.2 Generator grounding
3.3 Excitation systems
3.4 Generating station arrangements
4 Protection requirements
4.1 Generator stator thermal protection
4.2 Field thermal protection
4.3 Generator stator fault protection
4.4 Generator rotor field protection
4.5 Generator abnormal operating conditions
4.6 Backup protection
4.7 Generator breaker failure protection
4.8 Excitation system protection
4.9 Power transformer protection through mechanical fault
detection
5 Other protective considerations
5.1 Current transformers
5.2 Voltage transformers
5.3 Protection during start-up or shutdown
5.4 Inadvertent energizing
5.5 Subsynchronous resonance (SSR)
5.6 Transmission line reclosing near generating stations
5.7 Synchronizing
6 Multifunction generator protection systems
6.1 Introduction
6.2 Application on a typical generating unit
6.3 Testing of MGPSs
7 Protection specification
7.1 Protective arrangements
7.2 Protective functions
Annex A (informative) Sample calculations for settings of
generator protection functions
Annex B (informative) Bibliography
Provides a review of the generally accepted forms of protection for the synchronous generator and its excitation system. It summarizes the use of relays and devices and serves as a guide for the selection of equipment to obtain adequate protection.
Committee |
Power System Relaying and Control
|
DevelopmentNote |
Supersedes IEEE DRAFT C37.102. (02/2007)
|
DocumentType |
Standard
|
ISBN |
978-0-7381-5250-9
|
Pages |
190
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
IEEE DRAFT C37.119 : D7 2005 | GUIDE FOR BREAKER FAILURE PROTECTION OF POWER CIRCUIT BREAKERS |
IEEE DRAFT C37.95 : D6 99 | DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS |
IEEE 1665 : 2009 | GUIDE FOR THE REWIND OF SYNCHRONOUS GENERATORS, 50 HZ AND 60 HZ, RATED 1 MVA AND ABOVE |
IEEE C37.113-1999 | IEEE Guide for Protective Relay Applications to Transmission Lines |
IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
IEEE C37.119-2016 | IEEE Guide for Breaker Failure Protection of Power Circuit Breakers |
(INACTIVE RECORD)IEEE C50.12 : 2005 | SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
IEEE C37.119-2005 | IEEE Guide for Breaker Failure Protection of Power Circuit Breakers |
IEEE DRAFT C50.12 : D10 2004 | SALIENT-POLE 50 AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
IEEE C57.116-2014 | IEEE Guide for Transformers Directly Connected to Generators |
IEEE C37.101-2006 REDLINE | IEEE Guide for Generator Ground Protection |
IEEE DRAFT C37.91 : D7.0 2006 | PROTECTING POWER TRANSFORMERS |
IEEE DRAFT C37.102 : D8 2006 | AC GENERATOR PROTECTION |
IEEE C50.13 : 2014 | CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE |
IEEE 1547-2003 | IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
IEEE DRAFT 67 : D5 2005 | GUIDE FOR THE OPERATION AND MAINTENANCE OF TURBINE GENERATORS |
IEEE 1129-2014 | IEEE Guide for Online Monitoring of Large Synchronous Generators (10 MVA and Above) |
IEEE C37.91-2008 REDLINE | IEEE Guide for Protecting Power Transformers |
IEEE C37.233 : 2009 | GUIDE FOR POWER SYSTEM PROTECTION TESTING |
IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE C37.246-2017 | IEEE Guide for Protection Systems of Transmission-to-Generation Interconnections |
IEEE 421.5-2005 | IEEE Recommended Practice for Excitation System Models for Power System Stability Studies |
IEEE DRAFT C37.96 : D5 99 | DRAFT GUIDE FOR AC MOTOR PROTECTION |
IEEE C37.95-2014 | IEEE Guide for Protective Relaying of Utility-Consumer Interconnections |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
IEEE C50.13-2014 | IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above |
IEEE 1020-2023 | IEEE Guide for Control of Small (100 kVA to 5 MVA) Hydroelectric Power Plants |
IEEE 67-2005 | IEEE Guide for Operation and Maintenance of Turbine Generators |
IEEE C37.91-2008 REDLINE | IEEE Guide for Protecting Power Transformers |
IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
IEEE C37.110-1996 | IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes |
IEEE 32-1972 | IEEE Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices |
IEEE C57.13.3-2014 | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
(INACTIVE RECORD)IEEE C50.12 : 2005 | SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
IEEE C37.91-2000 | IEEE Guide for Protective Relay Applications to Power Transformers |
ANSI C50.10 : 1990 | ROTATING ELECTRICAL MACHINERY - SYNCHRONOUS MACHINES |
IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
IEEE C50.13-2005 | IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above |
IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEEE 502-1985 | IEEE Guide for Protection, Interlocking, and Control of Fossil-Fueled Unit-Connected Steam Stations |
IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
IEEE C57.13-1993 | IEEE Standard Requirements for Instrument Transformers |
IEEE 421.1-1986 | IEEE Standard Definitions for Excitation Systems for Synchronous Machines |
IEEE C57.13.3-1983 | IEEE Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases |
IEEE 142-1991 | IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems |
IEEE C50.13 : 2014 | CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE |
IEEE C37.101-2006 REDLINE | IEEE Guide for Generator Ground Protection |
IEEE 67-1990 | IEEE Guide for Operation and Maintenance of Turbine Generators |
IEEE C50.13-2014 | IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.