IEEE 80-2013 REDLINE
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IEEE Guide for Safety in AC Substation Grounding
Hardcopy , PDF
21-03-2024
English
15-05-2015
1 Overview
2 Normative references
3 Definitions
4 Safety in grounding
5 Range of tolerable current
6 Tolerable body current limit
7 Accidental ground circuit
8 Criteria of tolerable voltage
9 Principal design considerations
10 Special considerations for gas-insulated
substations (GIS)
11 Selection of conductors and connections
12 Soil characteristics
13 Soil structure and selection of soil model
14 Evaluation of ground resistance
15 Determination of maximum grid current
16 Design of grounding system
17 Special areas of concern
18 Construction of a grounding system
19 Field measurements of a constructed grounding
system
20 Physical scale models
Annex A (informative) - Bibliography
Annex B (informative) - Sample calculations
Annex C (informative) - Graphical and approximate
analysis of current division
Annex D (informative) - Simplified step and mesh
equations
Annex E (informative) - Equivalent uniform soil model
for non-uniform soils
Annex F (informative) - Parametric analysis of grounding
systems
Annex G (informative) - Grounding methods for high-voltage
stations with grounded neutrals
Annex H (informative) - Benchmark
Describes outdoor ac substations, either conventional or gas-insulated.
Committee |
Substations
|
DevelopmentNote |
Supersedes IEEE DRAFT 80 (04/2001)
|
DocumentType |
Standard
|
ISBN |
978-0-7381-8850-8
|
Pages |
426
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Withdrawn
|
Supersedes |
ASTM F 2249 : 2003 : R2009 | Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
BS ISO/IEC/IEEE 80005-1:2012 | Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements |
16/30337938 DC : 0 | BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
IEEE 1264-2015 | IEEE Guide for Animal Deterrents for Electric Power Supply Substations |
IEEE C37.122.4-2016 | IEEE Guide for Application and User Guide for Gas-Insulated Transmission Lines, Rated 72.5 kV and Above |
IEEE 487.3-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities |
UFC 4-022-03 : 2013 | UNIFIED FACILITIES CRITERIA - SECURITY FENCES AND GATES |
IEEE 1268-2005 | IEEE Guide for Safety in the Installation of Mobile Substation Equipment |
CSA C22.3 No. 6 : 2013 : INC : ERR ATA : 2014 | PRINCIPLES AND PRACTICES OF ELECTRICAL COORDINATION BETWEEN PIPELINES AND ELECTRIC SUPPLY LINES |
PD IEC/TR 63042-100:2016 | UHV AC transmission systems General information |
IEEE DRAFT C37.95 : D6 99 | DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS |
CSA C22.3 No. 6 : 2013 | PRINCIPLES AND PRACTICES OF ELECTRICAL COORDINATION BETWEEN PIPELINES AND ELECTRIC SUPPLY LINES |
IEEE C37.122.1-2014 | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
IEEE 487.1-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation Equipment |
IEEE 1234-2007 | IEEE Guide for Fault Locating Techniques on Shielded Power Cable Systems |
IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
IEEE DRAFT 1127 : D7 DEC 96 | DRAFT GUIDE FOR THE DESIGN, CONSTRUCTION, AND OPERATION OF ELECTRIC POWER SUBSTATIONS FOR COMMUNITY ACCEPTANCE AND ENVIRONMENTAL COMPATIBILITY |
NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
IEEE 837-2014 | IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding |
PIP ELCGL01 : 2013 | ELECTRICAL DESIGN CRITERIA |
UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
NACE SP0113:2023 | Pipeline Integrity Management: Methods Selection and Implementation |
NFPA 70B:2023 | Standard for Electrical Equipment Maintenance |
IEEE 2778-2020 | IEEE Guide for Solar Power Plant Grounding for Personnel Protection |
IEEE C62.92.1-2016 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part I: Introduction |
IEEE 1268-2016 | IEEE Guide for Safety in the Installation of Mobile Substation Equipment |
IEEE C37.122-2021 | IEEE Standard for High-Voltage Gas-Insulated Substations Rated Above 52 kV |
IEEE 1653.6-2018 | IEEE Recommended Practice for Grounding of DC Equipment Enclosures in Traction Power Distribution Facilities |
MIL-HDBK-1004-6 Base Document:1986 | LIGHTNING PROTECTION |
NACE SP 01 77 : 2014 | MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS |
IEEE C62.21 : 2003 | GUIDE FOR THE APPLICATION OF SURGE VOLTAGE PROTECTIVE EQUIPMENT ON AC ROTATING MACHINERY 1000 V AND GREATER |
NACE RP 01 77 : 0 | MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS |
BS 7354:1990 | Code of practice for design of high-voltage open-terminal stations |
IEEE 1031-2011 | IEEE Guide for the Functional Specification of Transmission Static Var Compensators |
IEEE C57.13.3-2014 | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
CSA C22.3 No. 61936-1 : 2008 : R2015 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
CSA C22.3 No. 61936-1 : 2008 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
IEEE DRAFT C57.13.3 : D9 2005 | GUIDE FOR GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES |
C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
IEEE DRAFT C37.108 : D6 98 | DRAFT GUIDE FOR THE PROTECTION OF NETWORK TRANSFORMERS |
CAN/CSA-C22.3 NO. 6-13 (R2017) | Principles and practices of electrical coordination between pipelines and electric supply lines |
CSA C22.3 No. 8 : 1991 | RAILWAY ELECTRIFICATION GUIDELINES |
IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
CSA M421 : 2011 | USE OF ELECTRICITY IN MINES |
C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
NEMA SG 11 : 2013 | GUIDE FOR HANDLING AND MAINTENANCE OF ALTERNATING CURRENT OUTDOOR HIGH-VOLTAGE CIRCUIT BREAKERS |
IEEE C62.42-2005 | IEEE Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) Or 1200 V (dc)] Circuits |
IEEE C62.23-1995 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
IEEE 487.2-2013 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems |
ENA ER S34 : ISSUE 1 AMD 2 1988 | A GUIDE FOR ASSESSING THE RISE OF EARTH POTENTIAL AT SUBSTATION SITES |
IEEE 957 : 2005 | GUIDE FOR CLEANING INSULATORS |
ASTM F 2249 : 2003 | Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
08/30191891 DC : DRAFT OCT 2008 | BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
IEEE 1827-2016 | IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
IEC PAS 80005-3:2014 | Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements |
IEEE 1048-2003 | IEEE Guide for Protective Grounding of Power Lines |
EN 61936-1 : 2010 AMD 1 2014 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014) |
API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
IEEE C62.72-2007 | IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits |
NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
CSA M421 : 2011 : R2016 | USE OF ELECTRICITY IN MINES |
CSA C22.3 No. 1 : 2015(R2020) | OVERHEAD SYSTEMS |
IEEE 3001.2:2017 | IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems |
CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
IEEE 81-2012 | IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System |
PD IEC/PAS 80005-3:2014 | Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements |
IEEE 524A : 1993 | GUIDE TO GROUNDING DURING THE INSTALLATION OF OVERHEAD TRANSMISSION LINE CONDUCTORS - SUPPLEMENT TO IEEE GUIDE TO THE INSTALLATION OF OVERHEAD TRANSMISSION LINE CONDUCTORS |
IEEE 367-2012 | IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault |
CSA C22.3 No. 1 : 2010 : INC : UPD 1 : 2011 : R2015 | OVERHEAD SYSTEMS |
IEEE DRAFT 367 : D5.1 SEP 95 | DRAFT RECOMMENDED PRACTICE FOR DETERMINING THE ELECTRIC POWER STATION GROUND POTENTIAL RISE AND INDUCED VOLTAGE FROM A POWER FAULT |
AEP-24 : 2006 | AIRCRAFT ELECTRICAL HAZARDS ON THE FLIGHT LINE |
IEEE C62.92.5-2009 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission Systems |
IEEE 979-2012 | IEEE Guide for Substation Fire Protection |
IEEE 1127-2013 REDLINE | IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility |
IEEE 1246-2011 REDLINE | IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
CSA C22.3 No. 1 : 2010 | OVERHEAD SYSTEMS |
IEEE 1695-2016 | IEEE Guide to Understanding, Diagnosing, and Mitigating Stray and Contact Voltage |
ASTM F 2249 : 2003 : R2015 | Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment |
I.S. EN 61936-1:2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
IEC TR 63042-100:2016 | UHV AC transmission systems - Part 100: General information |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
BS EN 61936-1 : 2010 | POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES |
IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
UNE-EN 61936-1:2012 | Power installations exceeding 1 kV a.c. -- Part 1: Common rules |
EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
IEEE C37.246-2017 | IEEE Guide for Protection Systems of Transmission-to-Generation Interconnections |
IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
IEEE 1303-2011 | IEEE Guide for Static Var Compensator Field Tests |
IEEE C62.92.3-2012 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary Systems |
IEEE 1590-2009 | IEEE Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems |
IEEE C37.95-2014 | IEEE Guide for Protective Relaying of Utility-Consumer Interconnections |
IEEE 487-2015 | IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations |
IEEE 3003.2-2014 | IEEE Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems |
IEEE C57.129-2007 REDLINE | IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers |
IEEE 1585 : 2002 | FUNCTIONAL SPECIFICATION OF MEDIUM VOLTAGE (1-35 KV) ELECTRONIC SERIES DEVICES FOR COMPENSATION OF VOLTAGE FLUCTUATIONS |
IEEE C57.143-2012 | IEEE Guide for Application for Monitoring Equipment to Liquid-Immersed Transformers and Components |
IEEE 1623-2004 | IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation |
IEC/ISO/IEEE 80005-1:2012 | Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements |
IEEE 789-2013 | IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments |
IEEE 1143-2012 | IEEE Guide on Shielding Practice for Low Voltage Cables |
NACE 35110 : 0 | AC CORROSION STATE-OF-THE-ART: CORROSION RATE, MECHANISM, AND MITIGATION REQUIREMENTS |
PIP ELCGL01:2023 | Electrical Design Criteria |
IEEE 1863-2019 | IEEE Guide for Overhead AC Transmission Line Design |
IEEE 2760-2020 | IEEE Guide for Wind Power Plant Grounding System Design for Personnel Safety |
IEEE 2720:2021 | IEEE Guide for Rail Potential Management for DC Electrification Systems |
IEEE C37.108-2021 | IEEE Guide for Protection of Secondary Network Systems |
IEEE 1246-2020 | IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
IEEE 2746-2020 | IEEE Guide for Evaluating AC Interference on Linear Facilities Co-Located Near Transmission Lines |
IEEE C37.122.2-2022 | IEEE Guide for the Application of Gas Insulated Substations 1 kV to 52 kV |
IEEE C37.122.7-2021 | IEEE Guide for Field Testing of Gas-Insulated Substations Rated Above 52 kV |
IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
IEEE 81-2012 | IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System |
IEEE 837-2014 | IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding |
IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.