IEEE 43-2013 REDLINE
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery
21-03-2024
English
06-03-2014
1 Overview
2 Normative references
3 Definitions
4 Safety considerations
5 Insulation resistance-general theory
6 Factors affecting insulation resistance
7 Conditions for measuring insulation resistance
8 Winding connections for insulation
resistance tests
9 Methods of measuring insulation resistance
10 Precautions
11 Interpretation of insulation resistance and
polarization index test results
12 Recommended minimum value of polarization
index and insulation resistance
Annex A (informative) - Variants in polarization index
Annex B (informative) - Direct versus alternating
voltage testing
Annex C (informative) - Monitoring charge and
discharge currents
Annex D (informative) - Insulation resistance profiling
(IRP)
Annex E (informative) - Bibliography
This document describes a recommended procedure for measuring insulation resistance of armature and field windings in rotating machines rated 750 W or greater.
Committee |
Electric Machinery
|
DevelopmentNote |
Supersedes IEEE DRAFT 43. (04/2001)
|
DocumentType |
Standard
|
ISBN |
978-0-7381-8937-6
|
Pages |
75
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Withdrawn
|
Supersedes |
IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
IEEE 1095-2012 REDLINE | IEEE Guide for the Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications |
CSA C392 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
CSA C392 : 2011 : INC : UPD 2 : 2012 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
IEEE 1068-2015 | IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries |
IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
IEEE 1665 : 2009 | GUIDE FOR THE REWIND OF SYNCHRONOUS GENERATORS, 50 HZ AND 60 HZ, RATED 1 MVA AND ABOVE |
NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
IEEE 115-2019 | IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis |
IEEE C62.21 : 2003 | GUIDE FOR THE APPLICATION OF SURGE VOLTAGE PROTECTIVE EQUIPMENT ON AC ROTATING MACHINERY 1000 V AND GREATER |
IEEE DRAFT 1248 : D7 97 | DRAFT GUIDE FOR THE COMMISSIONING OF ELECTRICAL SYSTEMS IN HYDROELECTRIC POWER PLANTS |
IEEE 334 : 2007 | QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS |
CSA C392 : 2011 : INC : UPD 1 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
IEEE DRAFT C50.12 : D10 2004 | SALIENT-POLE 50 AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
S.R. CLC/TS 60034-27:2011 | ROTATING ELECTRICAL MACHINES - PART 27: OFF-LINE PARTIAL DISCHARGE MEASUREMENTS ON THE STATOR WINDING INSULATION OF ROTATING ELECTRICAL MACHINES |
NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
IEEE DRAFT 434 : D10 2006 | FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE |
NEMA ICS 16:2001 | Motion/Position Control Motors, Controls and Feedback Devices |
NEMA MG 7 : 93 REV 1 96 | MOTION/POSITION CONTROL MOTORS AND CONTROLS |
IEEE 3006.3-2017 | IEEE Recommended Practice for Determining the Impact of Preventative Maintenance on the Reliability of Industrial and Commercial Power Systems |
IEEE 1290-2015 | IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating Stations |
CSA C392 : 2011 : R2016 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
IEEE C50.13 : 2014 | CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE |
IEEE DRAFT 67 : D5 2005 | GUIDE FOR THE OPERATION AND MAINTENANCE OF TURBINE GENERATORS |
IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
IEEE 252 : 1995 | TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS HAVING LIQUID IN THE MAGNETIC GAP |
IEEE 1205-2014 | IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities |
IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
CSA C391 : 2015 | TESTING OF THREE-PHASE SYNCHRONOUS MACHINES DURING REFURBISHMENT |
IEC 60034-27-4:2018 | Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines |
IEC TS 60034-27:2006 | Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
IEC 60034-27-1:2017 | Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation |
IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
CLC/TS 60034-27:2011 | Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
05/30128254 DC : DRAFT JAN 2005 | IEC 60034-27 - ROTATING ELECTRICAL MACHINES - PART 27: PARTIAL DISCHARGE OFF-LINE MEASUREMENTS ON THE STATOR WINDING INSULATION OF ROTATING MACHINERY |
DD CLC/TS 60034-27:2011 | Rotating electrical machines Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
IEEE 45.6-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
(INACTIVE RECORD)IEEE C50.12 : 2005 | SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
IEEE 2030.2-2015 | IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
IEEE 1415 : 2006 | INDUCTION MACHINERY MAINTENANCE TESTING AND FAILURE ANALYSIS |
IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
IEEE DRAFT 1068 : D3 JUN 96 | RECOMMENDED PRACTICE FOR THE REPAIR AND REWINDING OF MOTORS FOR THE PETROLEUM AND CHEMICAL INDUSTRY |
IEEE 841.1-2023 | IEEE Standard for Process Industry--International Energy Efficiency Class 3 (IE3) Premium-Efficiency, Severe Duty, Totally Enclosed Frame Surface Cooled Squirrel Cage Induction Motors--0.75 kW to 370 kW (1 hp to 500 hp) |
IEEE C50.13-2014 | IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above |
IEEE 841-2021 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Squirrel Cage Induction Motors from 0.75 kW to 370 kW (1 hp to 500 hp) |
IEEE 1812-2014 | IEEE Trial-Use Guide for Testing Permanent Magnet Machines |
IEEE 522-2023 | IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines |
IEEE 252-2022 | IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap |
NEMA MG 10012:2023 | Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators |
IEEE 56-2016 | IEEE Guide for Insulation Maintenance of Electric Machines |
IEEE 1017.4-2023 | IEEE Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors |
IEEE 112-2017 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
IEEE 1812-2023 REDLINE | IEEE Guide for Testing Permanent Magnet Machines |
IEEE 1-2000 | IEEE Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation |
NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
IEEE 67-2005 | IEEE Guide for Operation and Maintenance of Turbine Generators |
IEEE 62.2-2004 | IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery |
IEEE 56-1977 | IEEE Guide for Insulation Maintenance of Large Alternating-Current Rotating Machinery (10,000 kVA and Larger) |
IEEE 510-1983 | IEEE Recommended Practices for Safety in High-Voltage and High-Power Testing |
IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.