IEEE 1277-2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
29-06-2020
English
29-06-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. Scope
2. Normative references
3. Definitions
4. Letter symbols
5. General requirements - systems and environmental
data
6. Rating data
7. Construction of oil-immersed smoothing reactors
8. Tests 20
9. Losses and inductance
10. Temperature rise and loading conditions
11. Dielectric tests and insulation levels
12. Test code
Annex A (informative) - Application of HVDC smoothing
reactors
Annex B (informative) - Construction and installation
of dry-type air-core smoothing reactors for
HVDC application
Annex C (informative) - Short-circuit capability
Annex D (informative) - In-service overloading of HVDC
smoothing reactors
Annex E (informative) - Smoothing reactors used in
voltage source converters (VSC) HVDC schemes
Annex F (informative) - Smoothing reactors for 800 kV
ultra high voltage direct current
Annex G (informative) - Bibliography
Pertains to oil-immersed and dry-type smoothing reactors for dc transmission.
| Committee |
Transformers
|
| DevelopmentNote |
Supersedes IEEE DRAFT 1277. (06/2000)
|
| DocumentType |
Standard
|
| Pages |
102
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE C57.21 : 2008 | REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA |
| IEEE C57.16-2011 | IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors |
| BS EN 60076-6:2008 | Power transformers Reactors |
| I.S. EN 60076-6:2008 | POWER TRANSFORMERS - PART 6: REACTORS |
| CEI EN 60076-6 : 2015 | POWER TRANSFORMERS - PART 6: REACTORS |
| IEC 60076-6:2007 | Power transformers - Part 6: Reactors |
| EN 60076-6:2008 | Power transformers - Part 6: Reactors |
| IEEE C57.16-1996 | IEEE Standard Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEEE C57.19.03-1996 | IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications |
| IEEE 4-1995 | IEEE Standard Techniques for High-Voltage Testing |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| NEMA 107:2016 | Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEEE C57.16-2011 | IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| ASTM D 1275 : 2015 | Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEEE 315 : 1975 | GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS) |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| IEC TR 60919-2:2008+AMD1:2015 CSV | Performance of high-voltage direct current (HVDC) systems withline-commutated converters - Part 2: Faults and switching |
| IEEE C57.98-2011 | IEEE Guide for Transformer Impulse Tests |
| IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEC TS 61245:2015 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems |
| IEC 60076-6:2007 | Power transformers - Part 6: Reactors |
| IEEE C57.19.0:2005 | STANDARD REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR BUSHINGS FOR DC APPLICATIONS |
| IEC 60071-5:2014 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| IEC 61620:1998 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| IEEE C57.12.80-2002 | IEEE Standard Terminology for Power and Distribution Transformers |
| IEEE C57.12.00-2006 | IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| IEEE C57.12.90-2006 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEC 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| NEMA CC1 : 2009(R2015) | ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
| IEEE C57.21 : 2008 | REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| IEEE 693-2005 | IEEE Recommended Practice for Seismic Design of Substations |
| IEEE C57.106-2006 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.