IEEE 1242-1999
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
Available format(s)
PDF
Superseded date
20-07-2021
Superseded by
Language(s)
English
Published date
31-08-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. Overview
2. Normative references
3. Definitions, acronyms, and abbreviations
4. Typical instructions
5. Application guidelines
6. Conductors
7. Insulation
8. Shielding
9. Cable jackets
10. Moisture and chemical protection
11. Armor
12. Cable quality and testing considerations
13. Special-purpose cables
14. Cable installation
Annex A (informative) - Bibliography
Gives information on the specification and selection of power, control, and special-purpose cable, as typically used in petroleum, chemical, and similar plants.
| Committee |
Petroleum and Chemical Industry
|
| DevelopmentNote |
Supersedes IEEE Draft 1242
|
| DocumentType |
Standard
|
| Pages |
84
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE 3006.3-2017 | IEEE Recommended Practice for Determining the Impact of Preventative Maintenance on the Reliability of Industrial and Commercial Power Systems |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| IEEE 1143-2012 | IEEE Guide on Shielding Practice for Low Voltage Cables |
| IEEE 1810-2017 | IEEE Guide for the Installation of Fire-Rated Cables Suitable for Hydrocarbon Pool Fires for Critical and Emergency Shutdown Systems in Petroleum and Chemical Industries |
| UL 1685:4ED 2015-07-07 | Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables |
| CSA C22.2 No. 38 : 2014 | THERMOSET-INSULATED WIRES AND CABLES |
| TIA/EIA 568-1 : D2015 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS |
| IEEE 1202-2006 | IEEE Standard for Flame-Propagation Testing of Wire & Cable |
| IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| NEMA WC 74 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| IEEE 1018-2013 REDLINE | IEEE Recommended Practice for Specifying Electric Submersible Pump Cable--Ethylene-Propylene Rubber Insulation |
| IEC 60502-2:2014 RLV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| ASTM B 174 : 2017 : REDLINE | Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
| ICEA S 96 659 : 2014 | STANDARD FOR NONSHIELDED CABLES RATED 2001-5000 V FOR USE IN THE DISTRIBUTION OF ELECTRICAL ENERGY |
| IEEE 1637-2010 | IEEE Guide to Select Terminations for Shielded Alternating-Current Power Cable Rated 5 kV - 46 kV |
| UL 1072:4ED 2006-06-30 | Medium-Voltage Power Cables |
| ICEA S 93 639 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| NEMA WC 70 : 2009 | POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY |
| IEEE 383-2015 | IEEE Standard for Qualifying Electric Cables and Splices for Nuclear Facilities |
| ICEA S 73 532 : 2014 | STANDARD FOR CONTROL, THERMOCOUPLE, EXTENSION AND INSTRUMENTATION CABLE |
| IEEE 386-2016 | IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV |
| IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
| IEEE 1682-2011 | IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations |
| CSA C22.2 No. 123 : 2016 | METAL SHEATHED CABLES |
| IEEE 532-2007 REDLINE | IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables |
| IEEE 400.1-2007 | IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage |
| TIA/EIA 568-2 : C2009 AMD 1 2016 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR TELECOMMUNICATIONS CABLING AND COMPONENTS STANDARDS |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| IEC 61914:2015 | Cable cleats for electrical installations |
| UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
| IEC 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables |
| IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
| IEEE 1717-2012 | IEEE Standard for Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test Protocol |
| CSA C68.10 : 2014 | SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV |
| CSA C22.2 No. 131 : 2014 | TYPE TECK 90 CABLE |
| IEEE 493 : 2007 | DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE 400.2-2013 REDLINE | IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) |
| NEMA WC 57 : 2014 | CONTROL, THERMOCOUPLE EXTENSION, AND INSTRUMENTATION CABLES |
| IEEE 810-2015 | IEEE Standard for Hydraulic Turbine and Generator Shaft Couplings and Shaft Runout Tolerances |
| ICEA P 32 382 : 2007(R2018) | SHORT CIRCUIT CHARACTERISTICS OF INSULATED CABLES |
| ICEA S 104 696 : 2013 | INDOOR-OUTDOOR OPTICAL FIBER CABLE |
| IEEE 400.4-2015 | IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage |
| NES 713 : ISSUE 3 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| IEEE 835-1994 | IEEE Standard Power Cable Ampacity Tables |
| ISA MC96.1 : 1982 | TEMPERATURE MEASUREMENT THERMOCOUPLES |
| NES 711 : ISSUE 2 | DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| UL 1309:3ED 2017-04-21 | Marine Shipboard Cable |
| CSA C22.2 No. 239 : 2017 | CONTROL AND INSTRUMENTATION CABLES |
| UL 2196:2ED 2017-08-29 | Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables |
| TIA/EIA 568-3 : D2016 | OPTICAL FIBER CABLING AND COMPONENTS STANDARD |
| ICEA S 94 649 : 2013 | CONCENTRIC NEUTRAL CABLES RATED 5 THROUGH 46 KV |
| IEC 60331-23:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables |
| BS 6351-1:1983 | Electric surface heating Specification for electric surface heating devices |
| IEEE 142 : 2007 | GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASTM D 2633 : 2013-03 | TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| CEI EN 50288-7 : 2006 | CAVI METALLICI AD ELEMENTI MULTIPLI UTILIZZATI NEI SISTEMI DI COMUNICAZIONE E CONTROLLO DI TIPO ANALOGICO E DIGITALE - PARTE 7: SPECIFICA SETTORIALE PER CAVI PER STRUMENTAZIONE E CONTROLLO |
| ASTM E 662 : 2017-02 | TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS |
| IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
| CSA C68.3 : 1997 | |
| CSA C68.5 : 2013 | SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES |
| MIL C 24643 : A | CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
| IEEE 404-2012 | IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV |
| ICEA S 97 682 : 2013 | UTILITY SHIELDED POWER CABLES RATED 5 THROUGH 46 KV |
| UL 13:4ED 2015-03-18 | Power-Limited Circuit Cables |
| UL 2250:3ED 2017-03-30 | Instrumentation Tray Cable |
| IEC 60331-25:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables |
| IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
| NFPA 258 : 2001 | DETERMINING SMOKE GENERATION OF SOLID MATERIALS |
| CSA C22.2 No. 2556 : 2015 | WIRE AND CABLE TEST METHODS |
| ASTM B 173 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
| ASTM B 193 : 2016 : REDLINE | Standard Test Method for Resistivity of Electrical Conductor Materials |
| IEEE 515-2011 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
| IEEE 442-1981 | IEEE Guide for Soil Thermal Resistivity Measurements |
| IEEE 400-2012 REDLINE | IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above |
| IEC 60811-100:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General |
| ANSI/NEMA WC 71/ICEA S-96-659:2014 | Standard for Nonshielded Cables Rated 2001-5000 V for Use in the Distribution of Electric Energy |
| IEEE 575-2014 | IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
| ASTM D 2671 : 2013 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| IEEE 1143-2012 | IEEE Guide on Shielding Practice for Low Voltage Cables |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ICEA S 87 640 : 2016 | OPTICAL FIBER OUTSIDE PLANT COMMUNICATIONS CABLE |
| IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
| IEEE 844-2000 | IEEE Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.