IEC TS 60695-7-3:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
31-12-2021
English - French
11-02-2004
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Principles of toxic hazard assessment
5 Methods of toxic hazard assessment
6 Toxic potency values
7 Limitations on the interpretation of toxicity test results
8 Effluent components to be measured
Annex A (informative) - Guidance for the use of LC[50] values
Annex B (informative) - A simple worked example to illustrate
the principles of a toxic hazard analysis
Annex C (informative) F values for irritants
Bibliography
Concerns laboratory tests used to measure the toxic components of the fire effluent from either electrotechnical products or materials used in electrotechnical products. It provides guidance on the use and interpretation of results from such tests. It discusses currently available approaches to toxic hazard assessment consistent with the approach of ISO TC 92 SC 3, as set out in ISO/TR 9122-1 to 9122-6, ISO 13344 and ISO/TS 13571. It also provides guidance on the use of toxic potency data in hazard assessment and on principles which underlie the use of combustibility and toxicological information in hazard assessment.The methods described are applicable to data concerning both the incapacitating effects and the lethal effects of fire effluents.The structure of this technical specification remains essentially the same as the first edition but has been usefully expanded in all areas to further clarify the alignment with ISO/TC 92 Fire Safety and in particular with ISO 13344 and ISO/TS 13571.The main topics have been expanded upon to bring them into alignment with the current philosophy for the use and interpretation of test results.- Formulae are given for the calculation of the fraction of the incapacitating dose for each of the asphyxiants, carbon monoxideand hydrogen cyanide. - Volume fractions that are expected to cause incapacitation (F values) are given for some of the more important irritants.- Equations used to predict death are given.- The hyperventilatory effect of carbon dioxide is discussed.Has the status of a basic safety publication in accordance with IEC Guide 104.
Committee |
TC 89
|
DevelopmentNote |
To be read in conjunction with IEC 60695-7-1 and IEC 60695-7-2. (08/2011) Stability Date: 2018. (10/2012)
|
DocumentType |
Technical Specification
|
Pages |
63
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
Supersedes |
Standards | Relationship |
NF EN 60695-7-3 : 2012 | Identical |
NEN EN IEC 60695-7-3 : 2011 | Identical |
I.S. EN 60695-7-3:2011 | Identical |
PN EN 60695-7-3 : 2012 | Identical |
SAC GB/T 5169.39 : 2015 | Identical |
VDE 0471-7-3 : 2013 | Identical |
DIN EN 60695-7-3 : 2013 | Identical |
UNE-EN 60695-7-3:2012 | Identical |
BS EN 60695-7-3:2011 | Identical |
CEI EN 60695-7-3 : 2013 | Identical |
EN 60695-7-3 : 2011 | Identical |
AS 60695.7.3-2006 | Identical |
NEN NPR IEC 60695-7-3 : 1999 | Similar to |
DD IEC/TS 60695-7-3:2004 | Identical |
NEN NPR IEC/TS 60695-7-3 : 2004 | Identical |
BS PD IEC TR 60695-7.3 : 1998 | Identical |
CEI EN 60695-1-1 : 2000 | FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS GENERAL GUIDELINES |
I.S. EN 60695-1-1:2000 | FIRE HAZARD TESTING - PART 1-1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
IEC 60695-7-1:2010 | Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance |
EN 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
EN 60695-1-11:2015 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
EN 60695-1-1:2000 | Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
03/311411 DC : 0 | IEC 60695-1-11 ED.1 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
BS EN 60695-7-1:2010 | Fire hazard testing Toxicity of fire effluent. General guidance |
07/30169689 DC : 0 | BS EN 60695-1-10 - FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
DD IEC/TS 60695-7-51:2002 | Fire hazard testing. Toxicity of fire effluent Estimation of toxic potency. Calculation and interpretation of test results |
09/30205350 DC : 0 | BS EN 60695-7-2 ED.1 - FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS |
CEI EN 60695-7-1 : 2013 | FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE |
I.S. EN 60695-7-2:2011 | FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011) |
I.S. EN 60695-1-11:2015 | FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
PD IEC/TR 62222:2012 | Fire performance of communication cables installed in buildings |
IEC 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
CEI EN 60695-7-2 : 2013 | FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS |
BS EN 60695-1-11:2015 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment |
13/30281097 DC : 0 | BS EN 60695-1-11 ED 2.0 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
99/240635 DC : 0 | IEC 60695-7-51 ED 1.0 - FIRE HAZARD TESTING - PART 7-51: TOXICITY OF FIRE EFFLUENT - ESTIMATION OF TOXIC POTENCY - CALCULATION AND INTERPRETATION OF TEST RESULTS |
UNE-EN 60695-7-1:2011 | Fire hazard testing -- Part 7-1: Toxicity of fire effluent - General guidance |
16/30336629 DC : 0 | BS 8492 - TELECOMMUNICATIONS EQUIPMENT AND TELECOMMUNICATIONS CABLING - CODE OF PRACTICE FOR FIRE PERFORMANCE AND PROTECTION |
IEC TS 60695-7-51:2002 | Fire hazard testing - Part 7-51: Toxicity of fire effluent - Estimation of toxic potency: Calculation and interpretation of test results |
BS EN 60695-7-2:2011 | Fire hazard testing Toxicity of fire effluent. Summary and relevance of test methods |
07/30169687 DC : 0 | BS EN 60695-1-11 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
CSA ISO/IEC 18010 :2004 | INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
I.S. EN 60695-7-1:2010 | FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENTS - GENERAL GUIDANCE |
IEC 60695-1-11:2014 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
UNE-EN 60695-7-2:2012 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
10/30198657 DC : 0 | BS EN 60695-7-1 - FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE |
UNE-EN 60695-1-11:2016 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
PD IEC TR 60695-7-2:2002 | Fire hazard testing. Toxicity of fire effluent Summary and relevance of test methods |
CSA ISO/IEC 18010 : 2004 : INC : AMD 1 : 2006 : R2012 | INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
ISO/IEC 18010:2002 | Information technology Pathways and spaces for customer premises cabling |
IEC TR 60695-7-2:2002 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
EN 60695-7-1:2010 | Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance |
ISO 13344:2015 | Estimation of the lethal toxic potency of fire effluents |
ISO 16312-1:2016 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria |
IEC 60695-6-1:2005+AMD1:2010 CSV | Fire hazard testing - Part 6-1: Smoke obscuration - General guidance |
ISO 13943:2017 | Fire safety — Vocabulary |
IEC TS 60695-7-50:2002 | Fire hazard testing - Part 7-50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method |
ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
ISO 13571:2012 | Life-threatening components of fire — Guidelines for the estimation of time to compromised tenability in fires |
ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
IEC 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
IEC 60695-7-1:2010 | Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance |
ISO 19706:2011 | Guidelines for assessing the fire threat to people |
ISO/TR 16312-2:2007 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
IEC 60695-1-11:2014 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
IEC 60695-1-10:2016 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
ISO 19701:2013 | Methods for sampling and analysis of fire effluents |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.