IEC PAS 63125:2017
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Clothes washing machines for commercial use - Methods for measuring the performance
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-02-2022
English
27-06-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Requirements
5 Test conditions, materials, equipment and instrumentation
6 Preparation for testing
7 Performance measurements - general requirements
8 Tests for performance
9 Assessment of performance
10 Data to be reported
Annex A (normative) - Specification of stain test strips
with standardized soiling
Annex B (normative) - Reference detergents - Reference
detergent A
Annex C (normative) - Specifications for base
load - Cotton/synthetics base loads
Annex D (normative) - Reference machine
specification - Specification of the reference washing
machines and method of use
Annex E (normative) - Reference machine programme
definitions
Annex F (normative) - The bone-dry method of conditioning
Annex G (normative) - Folding and loading the test load
Annex H (normative) - Measuring the bath temperature
Annex I (informative) - Performance testing of gas fired
washing machines
Annex J (normative) - Performance testing of steam
heated washing machines
Annex K (normative) - Procedure to determine test load
size when rated capacity is not declared
Annex L (informative) - Uncertainty of measurements
in the present document
Annex M (normative) - Test report - Data to be reported
Annex N (informative) - Sources of materials and supplies
Bibliography
IEC PAS 63125:2017(E) specifies methods for measuring the performance of clothes washing machines for commercial use utilizing cold and/or hot water supplies and without heating or with heating devices for electricity, steam or gas. It also deals with appliances for both washing and drying textiles (washer-dryers) with respect to their washing-related functions. This PAS covers top, front and side-loaded non-household washing machines with horizontal or vertical axes and with one or more wash compartments.
The object is to state and define the principal performance characteristics of non-household washing machines and to describe the test methods for measuring these characteristics.
Non household tumble dryer performance is assessed to CLC/TS 50594.
This PAS does not apply to continuous batch washing machines (e.g. tunnel washers) or washing machines only possible to operate with automatic loading and unloading.
This PAS does not specify safety requirements for non-household washing machines. Safety requirements are specified in EN 50571 and the EN ISO 10472 series.
| Committee |
TC 59/SC 59D
|
| DevelopmentNote |
Stability Date: 2019. (06/2017)
|
| DocumentType |
Miscellaneous Product
|
| Pages |
98
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Withdrawn
|
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEC 61121:2012 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| EN ISO 3759:2011 | Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2011) |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| IEC 62053-21:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) |
| EN ISO 11664-2:2011 | Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
| EN 60704-2-4:2012 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
| IEC 60704-1:2010 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements |
| EN ISO 2060:1995 | Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
| IEC 60704-2-4:2011 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| IEC 60734:2012 | Household electrical appliances - Performance - Water for testing |
| IEC TR 61923:1997 | Household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO 4319:1977 | Surface active agents — Detergents for washing fabrics — Guide for comparative testing of performance |
| CLC/TS 50594:2015 | Tumble dryers for commercial use - Methods for measuring the performance |
| ISO 3759:2011 | Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
| EN 50229 : 2015 COR 2016 | ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| EN 60734:2012 | Household electrical appliances - Performance - Water for testing |
| EN 1458-2:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 2: Rational use of energy |
| ISO 2060:1994 | Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| DIN 53923:1978-01 | Testing of textiles; determination of water absorption of textile fabrics |
| IEC TR 62617:2015 | Home laundry appliances - Uncertainty reporting of measurements |
| ISO 2061:2015 | Textiles Determination of twist in yarns Direct counting method |
| EN 12953-10:2003 | Shell boilers - Part 10 : Requirements for feedwater and boiler water quality |
| EN 60704-1:2010/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010) |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| EN 12127:1997 | Textiles - Fabrics - Determination of mass per unit area using small samples |
| ISO/IEC Guide 43-2:1997 | Proficiency testing by interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies |
| EN ISO 2061:2015 | Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.