IEC PAS 61076-3-111:2002
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
31-12-2021
English
28-06-2002
FOREWORD
1 Scope
1.1 Normative references
2 IEC type designation
2.1 Terminology
3 Common Features
4 Industrial RJ45 Variants
4.1 General
4.1.1 Contact arrangement of all connector types
4.1.2 Terminations
4.2 Industrial RJ45 Variant
4.2.1 Industrial RJ45 Variant 01, Fixed Connector
4.2.2 Industrial RJ45 Variant 01, Free Connector
4.3 Industrial RJ45 Variant
4.3.1 Industrial RJ45 Variant 02, Fixed Connector
4.3.2 Industrial RJ45 Variant 02, Plug Connector
4.4 Industrial RJ45 Variant
4.4.1 Industrial RJ45 Variant 03, Fixed Connector Side
4.4.2 Industrial RJ45 Variant 03, Free Connector
5 Mounting Information for Variants 01-03
5.1 Mounting Information for Variant 01, Fixed Connector
5.2 Mounting Information for Variant 02, Fixed Connector
5.3 Mounting Information for Variant 03, Fixed Connector
6 Gauges
6.1 Fixed connectors, RJ 45 Interface
7 Characteristics
7.1 Climatic category: 40/085/21
7.2 Electrical
7.2.1 Creepage and clearance distances
7.2.2 Voltage proof
7.2.3 Current-carrying capacity
7.2.4 Initial contact resistance
7.2.5 Initial insulation resistance
7.3 Mechanical
7.3.1 Mechanical operation
7.3.2 Effectiveness of connector coupling devices
8 Test schedule
8.1 General
8.2 Test Procedures and Measuring Methods
8.3 Preconditioning
8.4 Wiring and Mounting of Specimens
8.4.1 Wiring
8.4.2 Mounting
8.5 Test Schedules
8.6 Arrangement for contact resistance test
8.7 Arrangement for dynamic stress tests (test phase AP2)
8.7.1 Basic (Minimum) Test Schedule
8.7.2 Full Test Schedule
Annexes
A Gauging requirements
B Locking device mechanical operation - Test procedure and
requirements
C Gauging continuity procedure
Covers an 8-way shielded industrial environment connector system of 4, 6 or 8 contacts consisting of a range of free and fixed connectors. A variety of different mounting configurations and termination types with a common mating configuration are dealt with.
DocumentType |
Miscellaneous Product
|
Pages |
35
|
PublisherName |
International Electrotechnical Committee
|
Status |
Withdrawn
|
Standards | Relationship |
NEN NPR IEC/PAS 61076-3-111 : 2002 | Identical |
IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
IEC 60512-8:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 60512-6:1984 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests |
IEC 60512-7:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests |
IEC 60807-1:1991 | Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60603-7:2008+AMD1:2011 CSV | Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
IEC 60512-4:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests |
IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
IEC 60512-5:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
IEC 60326-3:1991 | Printed boards - Part 3: Design and use of printed boards |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
IEC 60512-3:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.