IEC 62282-4-101:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
11-08-2022
Superseded by
Language(s)
English - French
Published date
12-08-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Construction requirements for safety
5 Performance requirements for safety and type tests
6 Routine tests
7 Markings
8 Instructions
Annex A (informative) - Comparison of pressure terms
Bibliography
IEC 62282-4-101:2014 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks. This standard is limited to electrically powered industrial trucks and is applicable to material-handling equipment, e.g. forklifts. It applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks.
| Committee |
TC 105
|
| DevelopmentNote |
Stability date: 2018. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
104
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SN EN 62282-4-101:2014 | Identical |
| OVE/ONORM EN 62282-4-101 : 2015 | Identical |
| NF EN 62282-4-101 : 2015 | Identical |
| NBN EN 62282-4-101 : 2014 | Identical |
| NEN EN IEC 62282-4-101 : 2014 | Identical |
| PN EN 62282-4-101 : 2014 | Identical |
| VDE 0130-4-101 : 2015 | Identical |
| DIN EN 62282-4-101 : 2015 | Identical |
| BS EN 62282-4-101:2014 | Identical |
| CEI EN 62282-4-101 : 1ED 2015 | Identical |
| EN 62282-4-101:2014 | Identical |
| UNE-EN 62282-4-101:2014 | Identical |
| 17/30293011 DC : DRAFT JUL 2017 | BS ISO 19881 - GASEOUS HYDROGEN - LAND VEHICLE FUEL CONTAINERS |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| EN 62282-4-102:2017 | Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods |
| BS EN 62282-4-102:2017 | Fuel cell technologies Fuel cell power systems for industrial electric trucks. Performance test methods |
| I.S. EN 62282-4-102:2017 | FUEL CELL TECHNOLOGIES - PART 4-102: FUEL CELL POWER SYSTEMS FOR INDUSTRIAL ELECTRIC TRUCKS - PERFORMANCE TEST METHODS |
| IEC 62282-4-102:2017 | Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| ISO 2440:1997 | Flexible and rigid cellular polymeric materials Accelerated ageing tests |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60695-11-4:2011 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| SAE J517_201612 | HYDRAULIC HOSE |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| ASME B31.1 : 2016 | POWER PIPING |
| IEC 60695-1-30:2017 | Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines |
| ISO 4675:2017 | Rubber- or plastics-coated fabrics — Low-temperature bend test |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| NFPA 505 : 2013 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
| IEC TS 62282-1:2013 | Fuel cell technologies - Part 1: Terminology |
| IEC 60227-3:1993+AMD1:1997 CSV | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring |
| UL 1450:4ED 2010-05-05 | Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 3691-1:2011 | Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| ASME B31.3:2016 | PROCESS PIPING |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| IEC 60335-2-80:2015 RLV | Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
| ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| IEC 62103:2003 | Electronic equipment for use in power installations |
| IEC 60079-29-4:2009 | Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| ISO 1798:2008 | Flexible cellular polymeric materials Determination of tensile strength and elongation at break |
| SAE J 2600 : 2015 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br> |
| ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| UL 79:10ED 2016-04 | Power-Operated Pumps for Petroleum Dispensing Products |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
| UL 2075:2ED 2013-03-05 | Gas and Vapor Detectors and Sensors |
| ISO/TS 14687-2:2008 | Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| ISO 15500-12:2015 | Road vehicles — Compressed natural gas (CNG) fuel system components — Part 12: Pressure relief valve (PRV) |
| ISO 10380:2012 | Pipework — Corrugated metal hoses and hose assemblies |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| ISO 4038:1996 | Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings |
| ISA MC96.1 : 1982 | TEMPERATURE MEASUREMENT THERMOCOUPLES |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| SAE J1739_200901 | POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 23551-1:2012 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| ISO 3996:1995 | Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| ISO 1419:1995 | Rubber- or plastics-coated fabrics Accelerated-ageing tests |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 17268:2012 | Gaseous hydrogen land vehicle refuelling connection devices |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| ISO 21927-3:2006 | Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators |
| UL 429:7ED 2013-11-06 | Electrically Operated Valves |
| ISO 10806:2003 | Pipework Fittings for corrugated metal hoses |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 2626:1973 | Copper — Hydrogen embrittlement test |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| UL 778:6ED 2016-07-07 | Motor-Operated Water Pumps |
| ISO 4080:2009 | Rubber and plastics hoses and hose assemblies — Determination of permeability to gas |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| SAE J 2719 : 2005(R2015) | HYDROGEN FUEL QUALITY FOR FUEL CELL VEHICLES |
| IEC 61204-7:2016 EXV | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| IEC 60227-5:2011 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| IEC 60335-2-41:2012 | Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.