IEC 62196-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
03-05-2022
English - French, Spanish, Castilian
19-06-2014
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Ratings
6 Connection between the power supply and the
electric vehicle
7 Classification of accessories
8 Marking
9 Dimensions
10 Protection against electric shock
11 Size and colour of protective earthing conductors
12 Provisions for protective earthing
13 Terminals
14 Interlocks
15 Resistance to ageing of rubber and thermoplastic
material
16 General construction
17 Construction of socket-outlets
18 Construction of plugs and vehicle connectors
19 Construction of vehicle inlets
20 Degrees of protection
21 Insulation resistance and dielectric strength
22 Breaking capacity
23 Normal operation
24 Temperature rise
25 Flexible cables and their connection
26 Mechanical strength
27 Screws, current-carrying parts and connections
28 Creepage distances, clearances and distances
29 Resistance to heat, to fire and to tracking
30 Corrosion and resistance to rusting
31 Conditional short-circuit current withstand test
32 Electromagnetic compatibility
33 Vehicle driveover
Bibliography
IEC 62196-1:2014 is applicable to plugs, socket-outlets, vehicle connectors, vehicle inlets and cable assemblies for electric vehicles, herein referred to as "accessories", intended for use in conductive charging systems which incorporate control means, with a rated operating voltage not exceeding:
- 690 V a.c. 50 Hz to 60 Hz, at a rated current not exceeding 250 A;
- 1 500 V d.c. at a rated current not exceeding 400 A.
This third edition cancels and replaces the second edition published in 2011 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of a preferred operating voltage of 1 000 V d.c.;
b) addition of a preferred rated current of 80 A d.c.;
c) addition of a provision for a combined interface a.c./d.c.;
d) description of d.c. configurations (previously under consideration);
e) addition of requirements pertaining to the locking mechanism, the interlock and the latching device;
f) addition of a test for accessories not suitable for making and breaking an electrical circuit under load;
g) addition of requirements and tests for insulated end caps.
Committee |
TC 23/SC 23H
|
DevelopmentNote |
Stability Date: 2018. (06/2014)
|
DocumentType |
Standard
|
Pages |
176
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
SS-EN IEC 62196-1, UTG 4:2023 | Identical |
SN EN 62196-1 : 2012 AMD 12 2014 | Identical |
PN EN 62196-1 : 2015 | Identical |
GOST R IEC 62196-1 : 2013 | Identical |
VDE 0623-5-1 : 2015 | Identical |
SN EN 62196-1:2014 | Identical |
DIN EN 62196-1 : 2015 | Identical |
VDE 0623-5 : 2004 | Identical |
BS ISO 15118-3 : 2015 | ROAD VEHICLES - VEHICLE TO GRID COMMUNICATION INTERFACE - PART 3: PHYSICAL AND DATA LINK LAYER REQUIREMENTS |
BS ISO 15118-1 : 2013 | ROAD VEHICLES - VEHICLE TO GRID COMMUNICATION INTERFACE - PART 1: GENERAL INFORMATION AND USE-CASE DEFINITION |
TR 102 886 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TECHNICAL CHARACTERISTICS OF SMART METERING (SM) SHORT RANGE DEVICES (SRD) IN THE UHF BAND; SYSTEM REFERENCE DOCUMENT, SRDS, SPECTRUM REQUIREMENTS FOR SMART METERING EUROPEAN ACCESS PROFILE PROTOCOL (PR-SMEP) |
13/30267662 DC : 0 | BS EN ISO 17409 - ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS |
PD ISO/TR 13062:2015 | Electric mopeds and motorcycles. Terminology and classification |
I.S. EN ISO 18246:2017 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015) |
BS EN ISO 15118-1:2015 | Road vehicles. Vehicle to grid communication interface General information and use-case definition |
IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
14/30287195 DC : 0 | BS ISO 18246 - ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY |
15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
12/30227495 DC : 0 | BS ISO 15118-1 - ROAD VEHICLES - VEHICLE TO GRID COMMUNICATION INTERFACE - PART 1: GENERAL INFORMATION AND USE-CASE DEFINITION |
I.S. EN ISO 17409:2017 | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15) |
ISO 15118-1:2013 | Road vehicles Vehicle to grid communication interface Part 1: General information and use-case definition |
BS EN 62196-2:2017 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
CEI R069-001 : 2004 | AC CONNECTION DEVICES FOR ELECTRIC VEHICLE CONDUCTIVE CHARGING |
I.S. EN ISO 15118-1:2015 | ROAD VEHICLES - VEHICLE TO GRID COMMUNICATION INTERFACE - PART 1: GENERAL INFORMATION AND USE-CASE DEFINITION (ISO 15118-1:2013) |
EN ISO 15118-1:2015 | Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO 15118-1:2013) |
BS EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles. Safety requirements for conductive connection to an external electric power supply |
13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
ISO 15118-3:2015 | Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link layer requirements |
EN 62196-2:2017 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
SAE J 2836/4 : 2017 | USE CASES FOR DIAGNOSTIC COMMUNICATION FOR PLUG-IN ELECTRIC VEHICLES |
I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
S.R. HD 60364-7-722:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLIES FOR ELECTRIC VEHICLES |
UNE-EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
UNE-EN ISO 17409:2017 | Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15) |
17/30347638 DC : 0 | BS EN ISO 15118-1 - ROAD VEHICLES - VEHICLE TO GRID COMMUNICATION INTERFACE - PART 1: GENERAL INFORMATION AND USE-CASE DEFINITION |
BS ISO 17409 : 2015 | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS |
UNE-EN 62196-2:2017 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
BS EN ISO 15118-3:2016 | Road vehicles. Vehicle to grid communication interface Physical and data link layer requirements |
BS EN ISO 17409:2017 | Electrically propelled road vehicles. Connection to an external electric power supply. Safety requirements |
UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
IEC 62196-2:2016 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
I.S. EN 62196-2:2017 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 2: DIMENSIONAL COMPATIBILITY AND INTERCHANGEABILITY REQUIREMENTS FOR A.C. PIN AND CONTACT-TUBE ACCESSORIES |
HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
I.S. EN ISO 15118-3:2016 | ROAD VEHICLES - VEHICLE TO GRID COMMUNICATION INTERFACE - PART 3: PHYSICAL AND DATA LINK LAYER REQUIREMENTS (ISO 15118-3:2015) |
CEI EN 62196-2 : 2015 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 2: DIMENSIONAL COMPATIBILITY AND INTERCHANGEABILITY REQUIREMENTS FOR A.C. PIN AND CONTACT-TUBE ACCESSORIES |
IEC TR 61850-90-8:2016 | Communication networks and systems for power utility automation - Part 90-8: Object model for E-mobility |
BS ISO 18246 : 2015 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY |
BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
ISO 18246:2015 | Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply |
BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
EN ISO 15118-3:2016 | Road vehicles - Vehicle to grid Communication interface - Part 3: Physical and data link layer requirements (ISO 15118-3:2015) |
EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
11/30252941 DC : DRAFT SEP 2011 | BS EN 60364-7-722 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLY OF ELECTRIC VEHICLE |
14/30298271 DC : 0 | BS EN 60364-7-722 ED 1.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLY OF ELECTRIC VEHICLES |
DIN EN ISO 17409:2016-09 (Draft) | ELECTRICALLY PROPELLED ROAD VEHICLES - CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY - SAFETY REQUIREMENTS (ISO 17409:2015, CORRECTED VERSION 2015-12-15) |
ISO/TR 13062:2015 | Electric mopeds and motorcycles - Terminology and classification |
PD IEC/TR 61850-90-8:2016 | Communication networks and systems for power utility automation Object model for E-mobility |
UNE-HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
NF EN 62196-2 : 2017 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 2: DIMENSIONAL COMPATIBILITY AND INTERCHANGEABILITY REQUIREMENTS FOR A.C. PIN AND CONTACT-TUBE ACCESSORIES |
CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
IEC 60364-7-722:2015 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
ISO 17409:2015 | Electrically propelled road vehicles Connection to an external electric power supply Safety requirements |
EN ISO 17409:2017 | Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements (ISO 17409:2015, Corrected version 2015-12-15) |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
IEC 61540:1997+AMD1:1998 CSV | Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) |
IEC 60228:2004 | Conductors of insulated cables |
IEC 60245-6:1994 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables |
IEC 60309-4:2006+AMD1:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock |
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV | Plugs and socket-outlets for household and similar purposes - Part1: General requirements |
IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
IEC 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
IEC 62335:2008 | Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules |
IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
IEC TR 60755:2008 | General requirements for residual current operated protective devices |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
IEC 61300-2-7:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment |
ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
IEC 61300-2-4:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention |
IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
IEC 61300-2-6:2010 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.