IEC 62149-5:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
31-12-2021
English - French
11-08-2009
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Term, definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 Classification
5 Product definition
5.1 Description of transceiver module
5.2 Description of applied form
5.3 Block diagram
5.4 Absolute limiting rating
5.5 Functional specification
6 Testing
6.1 Characterization testing
6.1.1 Characterization: transmitter section
6.1.2 Characterization: receiver section
6.2 Performance testing
7 Environmental specifications
7.1 General safety
7.2 Laser safety
7.3 Electromagnetic emission
Annex A (informative) Measurement on tolerance to the
reflected optical power (Table 3, Item 13)
Annex B (informative) Logic level of alarm and shutdown
signal
Bibliography
IEC 62149-5:2009 specifies performance on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) in ITU-T Recommendation G.983.1. The main changes with respect to the previous edition are:
- Normative references have been updated;
- Incorrect "Letter symbols" have been corrected;
- Some "Notes" in tables have been revised in order to harmonize with IEC 62150-2 (2004).
Committee |
TC 86/SC 86C
|
DevelopmentNote |
Stability Date: 2018. (10/2012)
|
DocumentType |
Standard
|
Pages |
53
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
OVE/ONORM EN 62149-5 : 2011 | Identical |
JIS C 5953-5:2008 | Identical |
NBN EN 62149-5 : 2011 | Identical |
NEN EN IEC 62149-5 : 2011 | Identical |
PN EN 62149-5 : 2011 | Identical |
VDE 0886-149-5 : 2011 | Identical |
DIN EN 62149-5 : 2011 | Identical |
CEI EN 62149-5 : 2012 | Identical |
NF EN 62149-5 : 2011 | Identical |
UNE-EN 62149-5:2011 | Identical |
BS EN 61069-2:2016 | Identical |
SN EN 62149-5 : 2003 | Identical |
EN 62149-5:2011 | Identical |
PNE-FprEN 62149-5 | Identical |
BS EN 62149-5:2011 | Identical |
BS EN 50478:2007 | Identical |
I.S. EN 62149-5:2011 | Identical |
03/300452 DC : DRAFT JAN 2003 | IEC 62150-2 ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
09/30210593 DC : DRAFT SEP 2009 | BS EN 62150-2 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
I.S. EN 62150-2:2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
BS EN 62150-2:2011 | Fibre optic active components and devices. Test and measurement procedures ATM-PON transceivers |
CEI EN 62150-2 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
IEC 62150-2:2010 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers |
EN 62150-2:2011 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
IEC 61280-1-3:2010 | Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement |
IEC 62007-1:2015 | Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
IEC 61300-2-17:2010 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold |
IEC 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
IEC 62007-2:2009 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
IEC 61280-1-1:2013 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
IEC 61300-2-18:2005 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
IEC 61300-2-22:2007 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
IEC TR 61931:1998 | Fibre optic - Terminology |
IEC 61300-3-6:2008 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
IEC 61280-2-2:2012 | Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement |
IEC 62148-1:2017 | Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance |
IEC 61281-1:1999 | Fibre optic communication subsystems - Part 1:Generic specification |
IEC 61300-2-4:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention |
IEC 61300-2-19:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) |
IEC 62150-2:2010 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.