IEC 62103:2003
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Electronic equipment for use in power installations
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
24-08-2019
Superseded by
Language(s)
English - French
Published date
24-07-2003
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 Requirements for the entire system
4.1 Normal function
4.2 Damage to persons or material
4.3 EE connected to unearthed supply mains under earth
fault conditions
4.4 Earthing requirements
4.5 Wires and cables for interconnection
4.6 Fuses in neutral and protective conductors
5 Safety requirements
5.1 General requirements
5.2 Requirements for EE with regard to protection against
electric shock
5.3 Requirements for EEs in installations with regard to
protection against electric shock
6 Environmental requirements and conditions
6.1 Climatic conditions
6.2 Mechanical requirements (General)
6.3 Electrical and electromagnetic requirements
7 Requirements for electronic equipment
7.1 Design and construction
7.2 Marking, identification, documentation
8 Requirements for the assembly of EE(s)
8.1 General
8.2 Fitting tolerances after assembly
8.3 Supply mains
9 Testing
9.1 General
9.2 Compliance with this standard
9.3 Overview of tests
9.4 Performance of the tests
Annex A (informative) Additional information
Bibliography
applies to the use of electronic equipment (EE) in power installations where a uniform technical level with respect to safety and reliability is necessary. also applies to EE which are not covered by a specific product standard. it defines the minimum requirements for the design and manufacture of EE connected to low-voltage (not exceeding 1 000 V a.c. or 1 500 V d.c.) mains supplies, for protection against electric shock, for testing and its integration into systems for power installations.
| Committee |
TC 22
|
| DevelopmentNote |
Stability Date: 2015. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
289
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| AS 62103-2006 | Identical |
| NEN IEC 62103 : 2003 | Identical |
| IEC 62933-2-1:2017 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| I.S. EN 50524:2009 | DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| EN 61800-5-1:2007/A1:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016) |
| EN 60255-27:2014 | Measuring relays and protection equipment - Part 27: Product safety requirements |
| EN 62253 : 2011 | PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS |
| EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
| 06/30157062 DC : 0 | BS EN 62310-3 - STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| BS EN 60255-27:2014 | Measuring relays and protection equipment Product safety requirements |
| PD IEC/TS 62578:2015 | Power electronics systems and equipment. Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz |
| BS EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
| 11/30250287 DC : 0 | BS EN 60255-27 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| NF EN 50524 : 2009 | DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| I.S. EN 60255-27:2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| I.S. EN 62310-1:2005 | STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 60146-1-1:2010 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| I.S. EN 61800-5-1:2007 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
| 17/30354643 DC : 0 | BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| BS EN 62253:2011 | Photovoltaic pumping systems. Design qualification and performance measurements |
| I.S. EN 61800-3:2005 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV)) |
| CEI EN 61558-2-10 : 2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-10: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS WITH HIGH INSULATION LEVEL AND SEPARATING TRANSFORMERS WITH OUTPUT VOLTAGES EXCEEDING 1000 V |
| 01/206938 DC : DRAFT OCT 2001 | IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT |
| 14/30279327 DC : 0 | BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
| 11/30242450 DC : DRAFT JAN 2011 | BS EN 61558-2-10 - SAFETY FOR TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-10: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS WITH HIGH INSULATION LEVEL AND SEPARATING TRANSFORMERS WITH OUTPUT VOLTAGES EXCEEDING 1000 V |
| PREN 50524 : DRAFT 2008 | DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| BS EN 62310-1:2005 | Static transfer systems (STS) General and safety requirements |
| BS EN 61800-3 : 2004 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
| EN IEC 62933-2-1:2018 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| I.S. EN IEC 62933-2-1:2018 | ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| UNE-EN 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
| IEC 62040-1:2017 EXV | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS |
| IEC 60255-27:2013 | Measuring relays and protection equipment - Part 27: Product safety requirements |
| BS EN 61800-5-1:2007 | Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy |
| 08/30183361 DC : DRAFT JUNE 2008 | BS EN 50524 - DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| CEI EN 50524 : 2010 | DATA SHEET AND NAME PLATE FOR PHOTOVOLTAIC INVERTERS |
| BS EN 50524:2009 | Data sheet and name plate for photovoltaic inverters |
| I.S. EN 61558-2-10:2014 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-10: PARTICULAR REQUIREMENTS AND TESTS FOR SEPARATING TRANSFORMERS WITH HIGH INSULATION LEVEL AND SEPARATING TRANSFORMERS WITH OUTPUT VOLTAGES EXCEEDING 1000 V |
| IEC TS 62578:2015 | Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz |
| I.S. EN 62310-3:2008 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| CEI EN 60255-27 : 2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| CEI EN 60146-1-1 : 2013 | SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| EN 50524:2009 | Data sheet and name plate for photovoltaic inverters |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| IEC 62310-3:2008 | Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| UNE-EN 62253:2012 | Photovoltaic pumping systems - Design qualification and performance measurements |
| 09/30199395 DC : 0 | BS EN 62253 - PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| IEC 62253:2011 | Photovoltaic pumping systems - Design qualification and performance measurements |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| EN 62310-3:2008 | Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
| BS EN 62310-3:2008 | Static transfer systems (STS) Method for specifying performance and test requirements |
| 06/30156472 DC : DRAFT SEP 2006 | BS EN 60146-1-1 - SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS |
| DD IEC TS 62578 : DRAFT 2009 | POWER ELECTRONICS SYSTEMS AND EQUIPMENT - OPERATION CONDITIONS AND CHARACTERISTICS OF ACTIVE INFEED CONVERTER APPLICATIONS |
| BS EN 60146-1-1:2010 | Semiconductor converters. General requirements and line commutated converters Specification of basic requirements |
| I.S. EN 62253:2011 | PHOTOVOLTAIC PUMPING SYSTEMS - DESIGN QUALIFICATION AND PERFORMANCE MEASUREMENTS |
| UNE-EN 50524:2010 | Data sheet and name plate for photovoltaic inverters |
| CEI EN 62310-3 : 2010 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| EN 61800-3 : 2004 AMD 1 2012 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011) |
| IEC 62310-1:2005 | Static transfer systems (STS) - Part 1: General and safety requirements |
| 15/30322229 DC : 0 | BS EN 61800-5-1:2007/AMD 1 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
| IEC 61558-2-10:2014 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V |
| EN 60146-1-1:2010 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| EN 62310-1:2005 | Static transfer systems (STS) - Part 1: General and safety requirements |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC TR 61000-2-6:1995 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
| IEC 60255-22-1:2007 | Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| IEC 61000-2-4:2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| IEC 60417-1:2002 | Graphical symbols for use on equipment - Part 1: Overview and application |
| IEC 60297-1:1986 | Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1: Panels and racks |
| IEC 60050-195:1998 | International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| IEC GUIDE 106:1996 | Guide for specifying environmental conditions for equipmentperformance rating |
| IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
| IEC 60478-1:1974 | Stabilized power supplies, d.c. output. Part 1: Terms and definitions |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 61082-1:2014 RLV | Preparation of documents used in electrotechnology - Part 1: Rules |
| IEC 61136-1:1992 | Semiconductor power convertors - Adjustable speed electric drive systems - General requirements - Part 1: Rating specifications, particularly for d.c. motor drives |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60755:2017 | General safety requirements for residual current operated protective devices |
| IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
| IEC 60721-3-2:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 60255-5:2000 | Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| IEC 60364-6-61:2001 | Electrical installations of buildings - Part 6-61: Verification - Initial verification |
| IEC TR 61000-2-1:1990 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 61180-1:1992 | High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
| IEC 60068-3-4:2001 | Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
| IEC 60654-3:1983 | Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences |
| IEC 60721-3-1:1997 | Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.