Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 61513:2011

Current

Current

The latest, up-to-date edition.

Nuclear power plants - Instrumentation and control important to safety - General requirements for systems

Available format(s)

Hardcopy , PDF 1 User

Language(s)

English - French

Published date

25-08-2011

$706.70
Including GST where applicable

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Overall I&C safety life cycle
6 System safety life cycle
7 Overall integration and commissioning
8 Overall operation and maintenance
Annex A (informative) - Basic safety issues in the NPP
Annex B (informative) - Categorisation of functions and
        classification of systems
Annex C (informative) - Qualitative defence approach
        against CCF
Annex D (informative) - Relations of IEC 61508 with
        IEC 61513 and standards of the nuclear
        application sector
Annex E (informative) - Changes to be performed in later
        revisions of SC 45A standards to adapt to this
        version of IEC 61513
Bibliography

Instrumentation and control (I&C) systems important to safety may be implemented using conventional hard-wired equipment, computer-based (CB) equipment or by using a combination of both types of equipment (see Note 1). IEC 61513:2011 provides requirements and recommendations for the overall I&C architecture which may contain either or both technologies. The main technical changes with regard to the previous edition are as follows:



- alignment with the latest revisions of IAEA documents;



- alignment with new editions of IEC 60880, IEC 61226, IEC 62138, IEC 62340 and IEC 60987;



- alignment with significant advances of software engineering techniques;



- integration of requirements for staff training.

Committee
TC 45/SC 45A
DevelopmentNote
Stability Date: 2018. (09/2017)
DocumentType
Standard
Pages
205
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

Standards Relationship
EN 61513:2013 Identical
NEN EN IEC 61513 : 2013 Identical
NF EN 61513 : 2013 Identical
CEI EN 61513 : 2013 Identical
BS EN 61513:2013 Identical
DIN EN 61513 : 2013 Identical
VDE 0491-2 : 2013 Identical
PN EN 61513 : 2013 Identical
GOST R IEC 61513 : 2011 Identical
NEN IEC 61513 : 2001 Identical
DIN IEC 61513 : 2002 AMD 100 2005 Identical
UNE-EN 61513:2013 Identical
BS IEC 61513:2011 Identical
PNE-prEN 61513 Identical

CSA N290.0 & N290.1 PACKAGE : 2013 CONSISTS OF N290.0-11, GENERAL REQUIREMENTS FOR SAFETY SYSTEMS OF NUCLEAR POWER PLANTS AND N290.1-13, REQUIREMENTS FOR THE SHUTDOWN SYSTEMS OF NUCLEAR POWER PLANTS
CSA N290.8 : 2015 TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS
IEEE 730-2014 IEEE Standard for Software Quality Assurance Processes
I.S. EN 60987:2015 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS
IEC TR 63123:2017 Nuclear power plants - Instrumentation, control and electrical power systems - Guidance for the application of IEC 63147:2017/IEEE Std 497™ -2016 in the IAEA / IEC framework
BS IEC 60880-2:2000 Software for computers important to safety for nuclear power plants Software aspects of defence against common cause failures, use of software tools and of pre-developed software
IEC TR 62918:2014 Nuclear power plants - Instrumentation and control important to safety - Use and selection of wireless devices to be integrated in systems important to safety
IEC TR 62096:2009 Nuclear power plants - Instrumentation and control important to safety - Guidance for the decision on modernization
IEC 62808:2015+AMD1:2018 CSV Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
IEC 60671:2007 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
BS IEC 62646:2016 Nuclear power plants. Control rooms. Computer-based procedures
BS IEC 62705:2014 Nuclear power plants. Instrumentation and control important to safety. Radiation monitoring systems (RMS): Characteristics and lifecycle
IEC TR 62987:2015 Nuclear power plants - Instrumentation and control systems important to safety - Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems
BS EN 61800-5-2:2017 Adjustable speed electrical power drive systems Safety requirements. Functional
EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
EN 62138:2009 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
EN 62566:2014 Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions
IEC 60737:2010 Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods
IEC 60965:2016 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room
IEC 60860:2014 Radiation protection instrumentation - Warning equipment for criticality accidents
IEC 62705:2014 Nuclear power plants - Instrumentation and control important to safety - Radiation monitoring systems (RMS): Characteristics and lifecycle
IEC 62646:2016 Nuclear power plants - Control rooms - Computer-based procedures
IEC 61504:2017 Nuclear facilities - Instrumentation and control systems important to safety - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
BS IEC 60988:2009 Nuclear power plants. Instrumentation important to safety. Acoustic monitoring systems for detection of loose parts: Characteristics, design criteria and operational procedures
IEC 60988:2009 Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures
IEC TR 62247:2003 Nuclear power plants - Main control room design - A review of the application of IEC 60964 (1989)
EN 60965:2016 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room
EN 62765-1:2017 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters
NF EN 60709 : 2010 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SEPARATION
PD IEC/TR 62918:2014 Nuclear power plants. Instrumentation and control important to safety. Use and selection of wireless devices to be integrated in systems important to safety
EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
ISO 12749-5:2018 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Nuclear reactors
EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
BS EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications
BS IEC 60568:2006 Nuclear power plants. Instrumentation important to safety. In-core instrumentation for neutron fluence rate (flux) measurements in power reactors
EN 60880:2009 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS
BS EN 61226:2010 Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions
BS EN 60965:2016 Nuclear power plants. Control rooms. Supplementary control room for reactor shutdown without access to the main control room
EN 62808:2016 Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF)
BS EN 62340:2010 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
PD IEC/TR 61838:2009 Nuclear power plants. Instrumentation and control important to safety. Use of probabilistic safety assessment for the classification of functions
BS EN 62566:2014 Nuclear power plants. Instrumentation and control important to safety. Development of HDL-programmed integrated circuits for systems performing category A functions
BS EN 61772:2013 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
IEC 61468:2000 Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors
CSA N290.14 : 2015 QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS
EN 61226:2010 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
I.S. EN 61226:2010 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS
EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
IEC 60532:2010 Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV
BS EN 60880:2009 Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions
BS IEC 60532:2010 Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
BS IEC 62855:2016 Nuclear power plants. Electrical power systems. Electrical power systems analysis
BS EN 60709:2010 Nuclear power plants. Instrumentation and control systems important to safety. Separation
BS IEC 61559-1:2009 Radiation protection instrumentation in nuclear facilities. Centralized systems for continuous monitoring of radiation and/or levels of radioactivity General requirements
BS IEC 61888:2002 Nuclear power plants. Instrumentation important to safety. Determination and maintenance of trip setpoints
BS IEC 60880:2006 Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions
BS IEC 62342:2007 Nuclear power plants. Instrumentation and control systems important to safety. Management of ageing
PD IEC/TR 62987:2015 Nuclear power plants. Instrumentation and control systems important to safety. Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems
BS EN 60671:2011 Nuclear power plants. Instrumentation and control systems important to safety. Surveillance testing
BS EN 62138:2009 Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions
BS EN 60964:2010 Nuclear power plants. Control rooms. Design
BS IEC 61504:2017 Nuclear facilities. Instrumentation and control systems important to safety. Centralized systems for continuous monitoring of radiation and/or levels of radioactivity
DIN IEC 60880-2 : 2001 NUCLEAR POWER PLANTS - SOFTWARE FOR COMPUTERS IMPORTANT TO SAFETY - PART 2: SOFTWARE ASPECTS OF DEFENCE AGAINST COMMON CAUSE FAILURES, USE OF SOFTWARE TOOLS AND OF PRE-DEVELOPED SOFTWARE
BS IEC 60860:2014 Radiation protection instrumentation. Warning equipment for criticality accidents
BS EN 61500:2011 Nuclear power plants. Instrumentation and control important to safety. Data communication in systems performing category A functions
BS EN 62765-1:2017 Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters Pressure transmitters
PD IEC/TR 62096:2009 Nuclear power plants. Instrumentation and control important to safety. Guidance for the decision on modernization
VDI/VDE 3528 Blatt 1:2017-06 Requirements of commercial grade products and criteria for their use in the instrumentation and control systems important to safety in nuclear power plants - General part
BS IEC 61772:2009 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
I.S. EN 62808:2016 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - DESIGN AND QUALIFICATION OF ISOLATION DEVICES
BS EN 60987:2015 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
IEC 61226:2009 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
03/301759 DC : DRAFT JAN 2003 IEC 60709 ED.2 - NUCLEAR POWER PLANTS - SEPARATION OF I&C SYSTEMS IMPORTANT TO SAFETY
CSA C22.2 NO. 60947-4-1:14 (R2019) Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1)
CAN/CSA-IEC/TS 62443-1-1:17 Industrial communication networks — Network and system security — Part 1-1: Terminology, concepts and models (Adopted IEC technical specification 62443-1-1:2009, first edition, 2009-07)
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
IEC 61800-5-2:2016 RLV Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
UNE-EN 60947-4-1:2011 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
BS IEC 60737:2010 Nuclear power plants. Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit). Characteristics and test methods
EN 61500:2011 Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
IEC TR 63084:2017 Nuclear power plants - Instrumentation and control important to safety - Platform qualification for systems important to safety
IEC 60880-2:2000 Software for computers important to safety for nuclear power plants - Part 2: Software aspects of defence against common cause failures, use of software tools and of pre-developed software
BS EN 60947-4-1 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
IEC 61225:2005 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60987:2007+AMD1:2013 CSV Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
IEC TR 62235:2005 Nuclear facilities - Instrumentation and control systems important to safety - Systems of interim storage and final repository of nuclear fuel and waste
IEC 61772:2009 Nuclear power plants - Control rooms - Application of visual display units (VDUs)
EN 60964:2010 Nuclear power plants - Control rooms - Design
EN 61772:2013 Nuclear power plants - Control rooms - Application of visual display units (VDUs)
BS IEC 61468:2000 Nuclear power plants. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
BS IEC 62651:2013 Nuclear power plants. Instrumentation important to safety.Thermocouples: characteristics and test methods
NF EN 62138 : 2009 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS
NF EN 61500 : 2011 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS
BS EN 62808:2016 Nuclear power plants. Instrumentation and control systems important to safety. Design and qualification of isolation devices
BS IEC 60768:2009 Nuclear power plants. Instrumentation important to safety. Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
PD IEC/TR 63084:2017 Nuclear power plants. Instrumentation and control important to safety. Platform qualification for systems important to safety
IEC 61559-1:2009 Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements
IEC 62651:2013 Nuclear power plants - Instrumentation important to safety - Thermocouples: characteristics and test methods
IEC 62765-1:2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters
BS IEC 61225:2005 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for electrical supplies
IEC 62566:2012 Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions
BS IEC 62671:2013 Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality
IEC 60568:2006 Nuclear power plants - Instrumentation important to safety - In-core instrumentation for neutron fluence rate (flux) measurements in power reactors
IEC 62138:2004 Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions
BS IEC 60987:2007 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
EN 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
BS IEC/IEEE 62582-5:2015 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Optical time domain reflectometry
IEC 60964:2009 Nuclear power plants - Control rooms - Design
IEC TS 62443-1-1:2009 Industrial communication networks - Network and system security - Part 1-1: Terminology, concepts and models
IEC 60768:2009 Nuclear power plants - Instrumentation important to safety - Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
IEC 62340:2007 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF)
IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
IEC 61888:2002 Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints
IEC 60880:2006 Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions
EN 60709:2010 Nuclear power plants - Instrumentation and control systems important to safety - Separation
IEC TR 61838:2009 Nuclear power plants - Instrumentation and control important to safety - Use of probabilistic safety assessment for the classification of functions
IEC 62855:2016 Nuclear power plants - Electrical power systems - Electrical power systems analysis
IEC 62619:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
BS IEC 61226 : 2009 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS
I.S. EN 61800-5-2:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
I.S. EN 60965:2016 NUCLEAR POWER PLANTS - CONTROL ROOMS - SUPPLEMENTARY CONTROL ROOM FOR REACTOR SHUTDOWN WITHOUT ACCESS TO THE MAIN CONTROL ROOM
I.S. EN 60947-4-1:2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 (EQV))

IEC 60050-394:2007 International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors
IEC 60671:2007 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
IEEE 610 : 1991 COMPUTER DICTIONARY - A COMPILATION OF IEEE STANDARD COMPUTER GLOSSARIES
IEEE 828-2012 IEEE Standard for Configuration Management in Systems and Software Engineering
IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
IEC 61226:2009 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
IEC 61500:2009 Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 62138:2004 Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions
IEC 61069-1:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
IEC 62003:2009 Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing
IEC 62381:2012 Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 62340:2007 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF)
IEC 60980:1989 Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)
IEC 60987:2007+AMD1:2013 CSV Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
ISO 8402:1994 Quality management and quality assurance — Vocabulary
IEC 60965:2016 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
ISO/IEC Guide 51:2014 Safety aspects — Guidelines for their inclusion in standards
ISO/IEC 12207:2008 Systems and software engineering Software life cycle processes
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 60880:2006 Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions
ISO 9001:2015 Quality management systems — Requirements
IEC 60780:1998 Nuclear power plants - Electrical equipment of the safety system - Qualification
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
IEC 61225:2005 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
IEC 60709:2004 Nuclear power plants - Instrumentation and control systems important to safety - Separation
IEC 60964:2009 Nuclear power plants - Control rooms - Design
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
ISO 10007:2017 Quality management — Guidelines for configuration management
IEC 61508-2:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more