IEC 61190-1-2:2014
Current
Current
The latest, up-to-date edition.
Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
19-02-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Standardized description for products
5 Test methods
6 Requirements
7 Quality assurance provisions
8 Preparation for delivery
9 Additional information - Performance and shelf life
extension inspections
Annex A (normative) - Test report on solder paste
Annex B (informative) - Reflow condition and profile
Annex C (informative) - Typical comparison of particle size
distributions between laser diffraction method and
screen method
Bibliography
IEC 61190-1-2:2014-02(en-fr) specifies general requirements for the characterization and testing of solder pastes used to make high-quality electronic interconnections in electronics assembly. This standard serves as a quality control document and is not intended to relate directly to the material's performance in the manufacturing process. This edition includes the following significant technical changes with respect to the previous edition:
a) modification of the solder powder size in Table 2;
b) addition of the information of "Reflow condition and profile" in Annex B;
c) addition of a new Annex C.
| Committee |
TC 91
|
| DevelopmentNote |
Stability date: 2020. (02/2014)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 61190-1-2 : 2014 | Identical |
| NBN EN 61190 1-2 : 2014 | Identical |
| NEN EN IEC 61190-1-2 : 2014 | Identical |
| I.S. EN 61190-1-2:2014 | Identical |
| PN EN 61190-1-2 : 2014 | Identical |
| SN EN 61190-1-2:2014 | Identical |
| UNE-EN 61190-1-2:2014 | Identical |
| CEI EN 61190-1-2 : 2015 | Identical |
| EN 61190-1-2:2014 | Identical |
| BS EN 61190-1-2:2014 | Identical |
| PNE-EN 61190-1-2:2007/FprA1 | Identical |
| DIN EN 61190-1-2:2014-11 | Identical |
| CEI EN 62137-1-4 : 2010 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST |
| I.S. EN 62137-1-5:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINTS - PART 1-5: MECHANICAL SHEAR FATIGUE TEST |
| BS IEC 61189-5-4 : 2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE FOR PRINTED BOARD ASSEMBLIES |
| 12/30274796 DC : 0 | BS IEC 61189-5-2 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDERING FLUX |
| 12/30274804 DC : 0 | BS IEC 61189-5-4 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE |
| 06/30153524 DC : DRAFT JULY 2006 | EN 62137-1-3 - SURFACE-MOUNT TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
| BS IEC 61189-5-2 : 2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING FLUX FOR PRINTED BOARD ASSEMBLIES |
| 05/30133599 DC : DRAFT MAY 2005 | IEC 62137-1-2 - SURFACE MOUNT TECHNOLOGY - ENVIRONMENTAL ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST |
| BS EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies General |
| BS PD ISO/IEC PAS 60127-8 : 2014 | MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| BS EN 61190-1-1:2002 | Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| CEI EN 60068-2-21 : 2006 | ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
| I.S. EN 62137-1-4:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST |
| I.S. EN 60749-21:2011 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 21: SOLDERABILITY |
| I.S. EN 61192-1:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - GENERAL |
| BS EN 60068-2-21:2006 | Environmental testing Tests. Test U: Robustness of terminations and integral mounting devices |
| NF EN 60068-2-58 : 2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| I.S. EN 61191-2:2017 | PRINTED BOARD ASSEMBLIES - PART 2: SECTIONAL SPECIFICATION - REQUIREMENTS FOR SURFACE MOUNT SOLDERED ASSEMBLIES |
| IEC 61189-5-2:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies |
| BS EN 61191-3:2017 | Printed board assemblies Sectional specification. Requirements for through-hole mount soldered assemblies |
| IEC 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| BS EN 61191-1:2013 | Printed board assemblies Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| EN 62137-1-2:2007 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test |
| EN 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies |
| EN 60749-21:2011 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 21: SOLDERABILITY |
| EN 62137-1-4:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test |
| EN 60127-4:2005/A2:2013 | Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types |
| NF EN 62025-2 : 2005 | HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS |
| EN 62137-1-3:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test |
| EN 61189-5-4:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies |
| EN 62137-1-5:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test |
| EN 62137:2004/corrigendum:2005 | ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN |
| EN 62878-1-1:2015 | Device embedded substrate - Part 1-1: Generic specification - Test methods |
| EN 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
| I.S. EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV)) |
| EN 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| 05/30133278 DC : DRAFT MAY 2005 | IEC 62137-1-1 - SURFACE MOUNT TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST |
| I.S. EN 62137-1-1:2007 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST |
| BS EN 62326-20:2016 | Printed boards Printed circuit boards for high-brightness LEDs |
| 09/30206176 DC : DRAFT JUNE 2009 | BS EN 62137-3 ED.1 - ELECTRONICS ASSEMBLY TECHNOLOGY - PART 3: SELECTION GUIDANCE OF ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SOLDER JOINTS |
| CEI EN 62137-1-5 : 2010 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-5: MECHANICAL SHEAR FATIGUE TEST |
| BS EN 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies Test methods for printed board assemblies |
| 12/30254697 DC : 0 | BS ISO 16525-9 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS |
| 07/30165180 DC : 0 | BS EN 60068-2-83 - ENVIRONMENTAL TESTING - PART 2-83: TESTS - TEST TF - SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES (SMD) BY THE WETTING BALANCE METHOD USING LEAD-FREE SOLDER PASTE |
| CEI EN 61189-5-3 : 2016 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES |
| 11/30243259 DC : 0 | BS EN 60068-2-58 ED.4 - ENVIRONMENTAL TESTING - PART 2-58: TESTS TD- TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| NF EN 62137-1-5 : 2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-5: MECHANICAL SHEAR FATIGUE TEST |
| BS ISO 16525-9:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of high-speed signal-transmission characteristics |
| BS EN 62137-1-5:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joints Mechanical shear fatigue test |
| 12/30274800 DC : 0 | BS IEC 61189-5-3 ED.1 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: TEST METHODS FOR PRINTED BOARD ASSEMBLIES: SOLDERING PASTE |
| CEI EN 60749-21 : 2012 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 21: SOLDERABILITY |
| IEC 61190-1-3:2017 | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications |
| BS EN 60127-4 : 2005 | MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES |
| I.S. EN 62137-1-2:2007 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST |
| CEI EN 60068-2-58 : 2016 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| I.S. EN 61192-5:2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| IEC PAS 62137-3:2008 | Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints |
| NF EN 61189-5 : 2008 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
| I.S. EN IEC 61190-1-3:2018 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDER FOR ELECTRONIC SOLDERING APPLICATIONS |
| I.S. EN 61190-1-3:2007 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| BS EN 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Guidance for printed board assemblies |
| IEC 61189-5-4:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-4: General test methods for materials and assemblies - Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 62137-1-3:2008 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test |
| IEC 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| IEC 62137:2004 | Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
| I.S. EN 61191-4:2017 | PRINTED BOARD ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION - REQUIREMENTS FOR TERMINAL SOLDERED ASSEMBLIES |
| I.S. EN 61191-3:2017 | PRINTED BOARD ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION - REQUIREMENTS FOR THROUGH-HOLE MOUNT SOLDERED ASSEMBLIES |
| 14/30309692 DC : 0 | BS EN 61189-5-1 ED 1.0 - TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-1: TEST METHODS FOR PRINTED BOARD ASSEMBLIES AND MATERIALS USED IN MANUFACTURING ELECTRONIC ASSEMBLIES - GUIDANCE DOCUMENTS AND HANDBOOKS |
| BS EN 62137:2004 | Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
| 15/30318681 DC : 0 | BS EN 61190-1-3 ED 3.0 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDER FOR ELECTRONIC SOLDERING APPLICATIONS |
| DD IEC PAS 62137-3 : DRAFT 2008 | ELECTRONICS ASSEMBLY TECHNOLOGY - SELECTION GUIDANCE OF ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SOLDER JOINTS |
| 14/30312344 DC : 0 | PD IEC/PAS 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| BS EN 61189-5-4:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies |
| BS EN 61189-5-2:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering flux for printed board assemblies |
| BS EN 62137-1-2:2007 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Shear strength test |
| BS IEC 61189-5-3 : 2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES |
| 05/30129049 DC : DRAFT FEB 2005 | IEC 62025-2 - HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS |
| BS EN 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods for materials and assemblies. Soldering paste for printed board assemblies |
| BS EN 62137-1-1:2007 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Pull strength test |
| 16/30338234 DC : 0 | BS EN 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| BS EN 61190-1-3 : 2007 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| I.S. EN 61189-5:2006 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
| I.S. EN 60068-2-21:2006 | ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
| I.S. EN 61189-3:2008 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) |
| IEC 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies |
| BS EN 61191-4:2017 | Printed board assemblies Sectional specification. Requirements for terminal soldered assemblies |
| IEC 60127-4:2005+AMD1:2008+AMD2:2012 CSV | Miniature fuses - Part 4: Universal modular fuse-links (UMF) -Through-hole and surface mount types |
| IEC 62137-4:2014 | Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices |
| BS EN 62137-4:2014 | Electronics assembly technology Endurance test methods for solder joint of area array type package surface mount devices |
| CEI EN 62137-1-3 : 2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
| BS EN 62878-1-1:2015 | Device embedded substrate Generic specification. Test methods |
| I.S. EN 62025-2:2005 | HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS |
| BS EN 62025-2:2005 | High frequency inductive components. Non-electrical characteristics and measuring methods Test methods for non-electrical characteristics |
| BS EN 62137-1-4:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic bending test |
| 05/30133287 DC : DRAFT MAY 2005 | IEC 61190-1-3 ED 2 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-3: REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDER FOR ELECTRONIC SOLDERING APPLICATIONS |
| NF EN 62137-1-4 : 2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST |
| NF EN 62137-1-3 : 2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
| I.S. EN 61189-5-4:2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-4: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID WIRE FOR PRINTED BOARD ASSEMBLIES |
| CEI EN 62137-1-1 : 2008 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST |
| EN IEC 61190-1-3:2018 | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications |
| NF EN 61190-1-3 : 2008 AMD 1 2010 | Fastening materials for electronic assemblies - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non fluxed solid solders for electronic soldering applications |
| I.S. EN 62137-1-3:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
| I.S. EN 62137:2005 | ENVIRONMENTAL AND ENDURANCE TESTING - TEST METHODS FOR SURFACE-MOUNT BOARDS OF AREA ARRAY TYPE PACKAGES FBGA, BGA, FLGA, LGA, SON AND QFN |
| IEC 61191-1:2013 | Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| I.S. EN 62878-1-1:2015 | DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS |
| IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| IEC 62137-1-5:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test |
| ISO 16525-9:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 9: Determination of high-speed signal-transmission characteristics |
| 15/30327712 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| IEC 61189-5-1:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-1: General test methods for materials and assemblies - Guidance for printed board assemblies |
| IEC 62137-1-4:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test |
| IEC 60749-21:2011 | Semiconductor devices - Mechanical and climatic test methods - Part 21: Solderability |
| 11/30255124 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| IEC 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
| IEC 62137-1-2:2007 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test |
| IEC 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| IEC 61192-5:2007 | Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered electronic assemblies |
| IEC 62137-1-1:2007 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test |
| IEC 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| IEC 62025-2:2005 | High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics |
| IEC 61189-3:2007 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| EN 62137-1-1 : 2007 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-1: PULL STRENGTH TEST |
| BS EN 60068-2-58 : 2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| BS EN 62137-1-3:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic drop test |
| 12/30271778 DC : 0 | BS EN 62137-4 ED.1 - ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES |
| I.S. EN 62137-4:2014 | ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES |
| BS EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards) |
| BS EN 61192-5:2007 | Workmanship requirements for soldered electric assemblies Rework, modification and repair of soldered electronic assemblies |
| CEI EN 62137-1-2 : 2008 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST |
| BS EN 60749-21:2011 | Semiconductor devices. Mechanical and climatic test methods Solderability |
| I.S. EN 61189-5-3:2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-3: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING PASTE FOR PRINTED BOARD ASSEMBLIES |
| I.S. EN 60127-4:2005 | MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES (IEC 60127-4:2005 (EQV)) |
| I.S. EN 62326-20:2016 | PRINTED BOARDS - PART 20: PRINTED CIRCUIT BOARDS FOR HIGHBRIGHTNESS LEDS |
| I.S. EN 61189-5-2:2015 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5-2: GENERAL TEST METHODS FOR MATERIALS AND ASSEMBLIES - SOLDERING FLUX FOR PRINTED BOARD ASSEMBLIES |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| I.S. EN 60068-2-58:2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| I.S. EN 61190-1-1:2002 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-1: REQUIREMENTS FOR SOLDERING FLUXES FOR HIGH-QUALITY INTERCONNECTIONS IN ELECTRONICS ASSEMBLY |
| EN 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| IEC 62326-20:2016 | Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
| EN 61192-5 : 2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013) |
| EN 61189-5-2:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies |
| EN 62326-20:2016 | Printed boards - Part 20: Printed circuit boards for high-brightness LEDs |
| EN 62137-4:2014/AC:2015 | ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES (IEC 62137-4:2014) |
| EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| OVE/ONORM EN 62025-2 : 2005 | HIGH FREQUENCY INDUCTIVE COMPONENTS - NON-ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 2: TEST METHODS FOR NON-ELECTRICAL CHARACTERISTICS |
| EN 61189-5 : 2006 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 5: TEST METHODS FOR PRINTED BOARD ASSEMBLIES |
| EN 60068-2-58:2015/A1:2018 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) (IEC 60068-2-58:2015/A1:2017) |
| EN 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| EN 62025-2:2005 | High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics |
| EN 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| IEC 61189-5-3:2015 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-3: General test methods for materials and assemblies - Soldering paste for printed board assemblies |
| ISO 9454-2:1998 | Soft soldering fluxes Classification and requirements Part 2: Performance requirements |
| IPC HDBK 005 : 0 | GUIDE TO SOLDER PASTE ASSESSMENT |
| IEC 61189-6:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies |
| IEC 61189-5:2006 | Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies |
| IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| IEC 61190-1-3:2007+AMD1:2010 CSV | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.