IEC 60923:2005+AMD1:2006 CSV
Current
Current
The latest, up-to-date edition.
Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, French, English
Published date
25-09-2006
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General notes on tests
5 Marking
6 Ballasts designed to operate at various supply voltages
7 Circuit power-factor
8 Supply current
9 Current waveform
9.1 Lamp operating current waveform
9.2 Test procedure
10 Magnetic screening
11 Ignitors
12 Electrical requirements for ballasts for high-pressure
mercury vapour lamps
12.1 Ballast setting
12.2 Short-circuit current
12.3 Open-circuit voltage (minimum voltage for stable
operation)
13 Electrical requirements for ballasts for low-pressure
sodium vapour lamps
13.1 Ballast setting
13.2 Short-circuit current and run-up conditions
13.3 Open-circuit voltage (minimum voltage for stable
operation)
14 Electrical requirements for ballasts for metal halide lamps
14.1 Ballast setting
14.2 Short-circuit current and run-up conditions
14.3 Open-circuit voltage (minimum voltage for stable
operation)
15 Electrical requirements for ballasts for high-pressure
sodium vapour lamps
15.1 Ballast setting
15.2 Short-circuit current
15.3 Open-circuit voltage
Annex A (normative) Reference ballasts
Annex B (normative) Reference lamps
Annex C (normative) General requirements for tests
Annex D (normative) Explanation of measurements of ballast
setting and lamp-operating current
waveform for high-pressure sodium vapour
lamps
Annex E (informative) Interpretations
This International Standard specifies performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast. This standard covers inductive type ballasts for use on a.c. supplies up to 1 000 V at 50 Hz to 60 Hz associated with discharge lamps, having rated wattage, dimensions and characteristics as specified in the relevant IEC lamp standards. This consolidated version consists of the third edition (2005) and its amendment 1 (2006). Therefore, no need to order amendment in addition to this publication.
| Committee |
TC 34/SC 34C
|
| DevelopmentNote |
Supersedes IEC 60262 (03/2001) To be read in conjunction with IEC 61347-2-9. (09/2005) Stability Date: 2017. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| GOST R IEC 60923 : 2011 | Identical |
| NEN EN IEC 60923 : 2005 AMD 1 2006 | Identical |
| PN EN 60923 : 2006 AMD 1 2006 | Identical |
| VDE 0712-13 : 2007 | Identical |
| BS EN 60923:2005 | Identical |
| EN 60923:2005/A1:2006 | Identical |
| SN EN 60923 : 2005 | Identical |
| DIN EN 60923 : 2007 | Identical |
| I.S. EN 60923:2005 | Identical |
| NF EN 60923 : 2006 AMD 1 2006 | Identical |
| BS 4782:1971 | Similar to |
| NEN 10923 : 1996 | Identical |
| UNE-EN 60923:2006 | Identical |
| GOST R IEC 923 : 1998 | Identical |
| I.S. EN 62386-207:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 207: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LED MODULES (DEVICE TYPE 6) |
| CSA E922 : 1998 : INC : UPD 1 : 1998 : R2012 | BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - GENERAL SAFETY REQUIREMENTS |
| UNE-EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| 09/30181599 DC : 0 | BS EN 62386-210 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 210: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - SEQUENCER (DEVICE TYPE 9) |
| 16/30321090 DC : 0 | BS EN 62386-302 ED 1.0 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 302: PARTICULAR REQUIREMENTS - INPUT DEVICES - ABSOLUTE INPUT DEVICES |
| BS EN 62386-207:2009 | Digital addressable lighting interface Particular requirements for control gear. LED modules (device type 6) |
| PREN 12665 : DRAFT 2009 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| BS EN 60922:1997 | Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements |
| BS EN 61049:1993 | Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements |
| DIN EN 60922 : 1997 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 62386-205:2009 | Digital addressable lighting interface Particular requirements for control gear. Supply voltage controller for incandescent lamps (device type 4) |
| 07/30154640 DC : DRAFT AUG 2007 | BS EN 62386-202 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 202: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SELF-CONTAINED EMERGENCY LIGHTING (DEVICE TYPE 1) |
| BS EN 60662:2012+A11:2019 | High-pressure sodium vapour lamps. Performance specifications |
| CEI EN 60188 : 2002 | HIGH PRESSURE MERCURY VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
| I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 61347-2-9:2013 | Lamp controlgear Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| DIN EN 12665:2016-09 (Draft) | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| 11/30252196 DC : 0 | BS EN 61347-1:2008 + A2 - LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| EN 62386-207:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 207: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LED MODULES (DEVICE TYPE 6) |
| EN 62386-103:2014 | Digital addressable lighting interface - Part 103: General requirements - Control devices |
| EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
| EN 60927:2007/A1:2013 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV)) |
| EN 62386-204 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 204: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LOW VOLTAGE HALOGEN LAMPS (DEVICE TYPE 3) |
| EN 62386-209 : 2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 209: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - COLOUR CONTROL (DEVICE TYPE 8) |
| EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| EN 62386-205:2009 | Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) |
| BS EN 60188:2001 | High-pressure mercury vapour lamps. Performance specifications |
| CEI EN 62386-208 : 2010 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 208: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SWITCHING FUNCTION (DEVICE TYPE 7) |
| 04/300396 DC : DRAFT JAN 2004 | IEC 61347-1 A2 ED.1 - LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| 09/30173981 DC : 0 | BS EN 60662 - HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
| I.S. EN 61167:2016 | METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
| BS EN 62386-210:2011 | Digital addressable lighting interface Particular requirements for control gear. Sequencer (device type 9) |
| 09/30185891 DC : 0 | BS EN 12665 - LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| 07/30154654 DC : DRAFT AUG 2007 | BS EN 62386-204 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 204: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - LOW VOLTAGE HALOGEN LAMPS (DEVICE TYPE 3) |
| 07/30154666 DC : 0 | BS EN 62386-206 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 206: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - CONVERSION FROM DIGITAL SIGNAL INTO D.C. VOLTAGE (DEVICE TYPE 5) |
| 07/30154647 DC : DRAFT AUG 2007 | BS EN 62386-203 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 203: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) (DEVICE TYPE 2) |
| I.S. EN 62442-2:2014 | ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 2: CONTROLGEAR FOR HIGH INTENSITY DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR |
| BS EN 60927 : 2007 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
| CEI EN 62386-202 : 2010 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 202: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - SELF-CONTAINED EMERGENCY LIGHTING (DEVICE TYPE 1) |
| CEI EN 62386-209 : 2012 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 209: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - COLOUR CONTROL (DEVICE TYPE 8) |
| UNE-EN 62035:2015 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| IEC 62386-205:2009 | Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) |
| I.S. EN 62035:2014 | DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS |
| EN 62386-102:2014 | Digital addressable lighting interface - Part 102: General requirements - Control gear |
| 15/30333423 DC : 0 | BS EN 61167:2014/PRAA:2015 - METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
| CEI EN 62386-204 : 2010 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 204: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - LOW VOLTAGE HALOGEN LAMPS (DEVICE TYPE 3) |
| 13/30280869 DC : 0 | BS EN 62386-102 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 102: GENERAL REQUIREMENTS - CONTROL GEAR |
| CSA E922 : 1998 | BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - GENERAL SAFETY REQUIREMENTS |
| BS EN 62386-203:2009 | Digital addressable lighting interface Particular requirements for control gear. Discharge lamps (excluding fluorescent lamps) (device type 2) |
| 07/30154658 DC : 0 | BS EN 62386-205 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 205: SUPPLY VOLTAGE CONTROLLER FOR INCANDESCENT LAMPS (DEVICE TYPE 4) |
| 10/30230355 DC : 0 | BS EN 61347-2-9 - LAMP CONTROLGEAR - PART 2-9: PARTICULAR REQUIREMENTS FOR CONTROL GEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) |
| I.S. EN 62386-102:2014 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 102: GENERAL REQUIREMENTS - CONTROL GEAR |
| I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 61167:2011 | Metal halide lamps. Performance specification |
| I.S. EN 62386-206:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 206: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - CONVERSION FROM DIGITAL SIGNAL INTO D.C. VOLTAGE (DEVICE TYPE 5) |
| BS EN 62442-2:2014 | Energy performance of lamp controlgear Controlgear for high intensity discharge lamps (excluding fluorescent lamps). Method of measurement to determine the efficiency of the controlgear |
| EN 62442-2:2014/A11:2017 | ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 2: CONTROLGEAR FOR HIGH INTENSITY DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR |
| I.S. EN 61347-2-1:2004 | LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) |
| IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
| I.S. EN 60662:2012 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60662:2011 (MOD)) |
| BS EN 62386-103:2014+A1:2018 | Digital addressable lighting interface General requirements. Control devices |
| BS EN 60192:2001 | Low pressure sodium vapour lamps. Performance specification |
| BS EN 60598-1:2015 | Luminaires General requirements and tests |
| UNI EN 12665 : 2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| I.S. EN 62386-202:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 202: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SELF-CONTAINED EMERGENCY LIGHTING (DEVICE TYPE 1) |
| UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| IEC 62386-202:2009 | Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) |
| IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
| EN 61167:2016 | Metal halide lamps - Performance specification |
| CEI EN 62386-205 : 2010 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 205: SUPPLY VOLTAGE CONTROLLER FOR INCANDESCENT LAMPS (DEVICE TYPE 4) |
| BIS IS 16148 : 2014 | METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
| DIN VDE 0715-4 : 1992 | LAMPS - HIGH-PRESSURE MERCURY VAPOUR LAMPS |
| CSA E598.1 : 2002 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| 16/30344766 DC : 0 | BS EN 62442-2 ED1.0/A1 - ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 2: CONTROLGEAR FOR HIGH INTENSITY DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - METHOD OF MEASUREMENT TO DETERMINE THE EFFICIENCY OF THE CONTROLGEAR |
| BS EN 62386-208:2009 | Digital addressable lighting interface Particular requirements for control gear. Switching function (device type 7) |
| CEI EN 60192 : 2002 | LOW PRESSURE SODIUM VAPOUR LAMPS PERFORMANCE REQUIREMENTS |
| CEI EN 61347-2-9 : 2013 | LAMP CONTROLGEAR - PART 2-9: PARTICULAR REQUIREMENTS FOR ELECTROMAGNETIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) |
| BS EN 62386-209:2011 | Digital addressable lighting interface Particular requirements for control gear. Colour control (device type 8) |
| CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| CEI EN 62386-210 : 2012 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 210: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SEQUENCER (DEVICE TYPE 9) |
| 10/30181591 DC : 0 | BS EN 62386-103 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 103: GENERAL REQUIREMENTS - CONTROL DEVICES |
| 07/30154629 DC : 0 | BS IEC 62386-102 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 102: GENERAL REQUIREMENTS - CONTROL GEAR |
| I.S. EN 61347-2-9:2013 | LAMP CONTROLGEAR - PART 2-9: PARTICULAR REQUIREMENTS FOR ELECTROMAGNETIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) (IEC 61347-2-9:2012 (EQV)) |
| CAN/CSA-E922-98 (R2017) | Ballasts for Discharge Lamps (Excluding Tubular Fluorescent Lamps) - General Safety Requirements (Adopted CEI/IEC 922:1989, first edition, including Amendment 1:1990 and Amendment 2:1992, with Canadian deviations) | Ballasts pour lampes à décharge (à l\'exclusion des lampes tubulaires à fluorescence) - Prescriptions générales et prescriptions de sécurité (norme CEI/IEC 922:1989 adoptée, première édition, avec l\'amendement 1:1990 et l\'amendement 2:1992, avec exigences propres aux Canada) |
| EN 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| CEI EN 62386-203 : 2010 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 203: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) (DEVICE TYPE 2) |
| CEI EN 62386-207 : 2010 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 207: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - LED MODULES (DEVICE TYPE 6) |
| CEI EN 62386-206 : 2010 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 206: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - CONVERSION FROM DIGITAL SIGNAL INTO D. C. VOLTAGE (DEVICE TYPE 5) |
| UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
| IEC 62035:2014+AMD1:2016 CSV | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| I.S. EN 62386-203:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 203: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 62386-204:2009 | Digital addressable lighting interface - Part 204: Particular requirements for control gear - Low voltage halogen lamps (device type 3) |
| IEC 62386-102:2014 | Digital addressable lighting interface - Part 102: General requirements - Control gear |
| IEC 62386-209:2011 | Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8) |
| UNE-EN 12665:2012 | Light and lighting - Basic terms and criteria for specifying lighting requirements |
| IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| BS EN 12665:2011 | Light and lighting. Basic terms and criteria for specifying lighting requirements |
| IEC 60922:1997 | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements |
| IEC 62386-210:2011 | Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9) |
| IEC 62386-208:2009 | Digital addressable lighting interface - Part 208: Particular requirements for control gear - Switching function (device type 7) |
| 12/30266672 DC : 0 | BS EN 60598-1 ED 8.0 - LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| 16/30347845 DC : 0 | BS EN 62386-103 ED 1.0/A1 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 103: GENERAL REQUIREMENTS - CONTROL DEVICES |
| 16/30347841 DC : 0 | BS EN 62386-102 ED 2.0/A1 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 102: GENERAL REQUIREMENTS - CONTROL GEAR |
| I.S. EN 62386-210:2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 210: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SEQUENCER (DEVICE TYPE 9) (IEC 62386-210:2011 (EQV)) |
| BS EN 62386-206:2009 | Digital addressable lighting interface Particular requirements for control gear. Conversion from digital signal into d.c. voltage (device type 5) |
| BS EN 62386-204:2009 | Digital addressable lighting interface Particular requirements for control gear. Low voltage halogen lamps (device type 3) |
| BS EN 62386-202:2009 | Digital addressable lighting interface Particular requirements for control gear. Self-contained emergency lighting (device type 1) |
| CEI EN 60662 : 2013 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
| NF EN 60927 : 2007 AMD 1 2014 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
| 07/30154670 DC : DRAFT AUG 2007 | BS EN 62386-207 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 207: PARTICULAR REQUIREMENTS FOR CONTROL GEARS - LED MODULES (DEVICE TYPE 6) |
| 07/30173634 DC : 0 | BS EN 62386-208 - DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 208: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SWITCHING FUNCTION (DEVICE TYPE 7) |
| I.S. EN 62386-103:2014 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 103: GENERAL REQUIREMENTS - CONTROL DEVICES |
| I.S. EN 60927:2008 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
| I.S. EN 62386-205:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 205: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SUPPLY VOLTAGE CONTROLLER FOR INCANDESCENT LAMPS (DEVICE TYPE 4) |
| I.S. EN 62386-204:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 204: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LOW VOLTAGE HALOGEN LAMPS (DEVICE TYPE 3) |
| I.S. EN 62386-209:2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 209: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - COLOUR CONTROL (DEVICE TYPE 8) |
| I.S. EN 62386-208:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 208: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SWITCHING FUNCTION (DEVICE TYPE 7) |
| EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 62035:2014 | Discharge lamps (excluding fluorescent lamps). Safety specifications |
| I.S. EN 12665:2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
| IEC 62386-206:2009 | Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5) |
| IEC 62386-203:2009 | Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2) |
| IEC 60927:2007+AMD1:2013 CSV | Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements |
| EN 62386-210:2011 | Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9) |
| EN 60922:1997 | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - General and safety requirements |
| EN 62386-208:2009 | Digital addressable lighting Interface - Part 208: Particular requirements for control gear - Switching function (device type 7) |
| EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
| EN 62386-202 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 202: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SELF-CONTAINED EMERGENCY LIGHTING (DEVICE TYPE 1) |
| EN 62386-203:2009 | Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2) |
| EN 62035:2014 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| EN 61347-2-1:2001/A2:2014 | LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) (IEC 61347-2-1:2000/A2:2013) |
| EN 62386-206:2009 | Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d. c. voltage (device type 5) |
| CSA E60598.1 : 2016 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| IEC 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
| IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
| IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
| IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV | Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
| IEC 61167:2015 | Metal halide lamps - Performance specification |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.