IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
31-12-2021
English, English - French
14-12-2010
FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Requirements
Annex A (informative) - Rationale
Annex B (informative) - Summary of requirements at
locations in OFCS
Annex C (informative) - Methods of hazard/safety
analysis
Annex D (informative) - Application notes for the
safe use of OFCS
Annex E (informative) - Guidance for service and
maintenance
Annex F (informative) - Clarification of the meaning
of 'hazard level'
Bibliography
IEC 60825-2:2004+A1:2006+A2:2010 Provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This Part 2 requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, including its components and subassemblies that generate or amplify optical radiation. Individual components and subassemblies that are sold only to OEM vendors for incorporation into a complete installed end-to-end OFCS need not be assessed to this standard, since the final OFCS should itself be assessed according to this standard. The objective of this Part 2 of IEC 60825 is to:
- protect people from optical radiation resulting from OFCS;
- provide requirements for manufacturers, installation organizations, service organizations and operating organizations in order to establish procedures and supply information so that proper precautions can be adopted;
- ensure adequate warnings are provided to individuals regarding the potential hazards associated with OFCS through the use of signs, labels and instructions. This consolidated version consists of the third edition (2004), its amendment 1 (2006), its amendment 2 (2010), interpretation sheet 1 (2008) and 2 (2018). Therefore, no need to order amendments in addition to this publication.
Committee |
TC 76
|
DevelopmentNote |
Stability Date: 2017. (09/2017)
|
DocumentType |
Standard
|
Pages |
114
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
Standards | Relationship |
GOST IEC 60825-2 : 2013 | Identical |
NF EN 60825-2 : AUG 2005 AMD 2 11 | Identical |
I.S. EN 60825-2:2004 | Identical |
PN EN 60825-2 : 2009 AMD 2 2010 | Identical |
SN EN 60825-2 : 2000 | Identical |
AS/NZS 2211.2:2006 | Identical |
VDE 0837-2 : 2011 | Identical |
DIN EN 60825-2 : 2011 | Identical |
AS/NZS IEC 60825.2:2011 | Identical |
BIS IS 14624-2 : 2012 | Identical |
UNE-EN 60825-2:2005 | Identical |
BS EN 60825-2 : 2004 | Identical |
EN 60825-2:2004/A2:2010 | Identical |
NEN 10825-2 : 1994 C1 1995 | Similar to |
GOST R IEC 60825-2 : 2009 | Identical |
NEN EN IEC 60825-2 : 2004 AMD 2 2010 | Identical |
NEN IEC 60825-2 : 2000 | Identical |
BS EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, terminal equipment box type 1 for category C |
02/205755 DC : DRAFT MAY 2002 | IEC TR 62324. ED.1 - RAMAN GAIN EFFICIENCY MEASUREMENT OF SINGLE-MODE OPTICAL FIBRES USING CONTINUOUS WAVE METHOD - GUIDANCE |
BS EN 61290-2-2:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Electrical spectrum analyzer |
ANSI INCITS 338 : 2003 | HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S OPTICAL SPECIFICATION (HIPPI-6400-OPT) |
I.S. EN 61290-3-2:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
14/30296823 DC : 0 | BS EN 61300-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
05/30140924 DC : DRAFT OCT 2005 | IEC 62324 TR - SINGLE-MODE OPTICAL FIBRES - RAMAN GAIN EFFICIENCY MEASUREMENT USING CONTINUOUS WAVE METHOD - GUIDANCE |
BS ISO/IEC 11801-1:2017 | Information technology. Generic cabling for customer premises General requirements |
BS EN 61291-1:2012 | Optical amplifiers Generic specification |
PREN ISO 80601-2-61 : DRAFT 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
08/30175854 DC : DRAFT JAN 2008 | IEC 61746-2 ED1 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
CEI CLC/TR 50510 : 2013 | FIBRE OPTIC ACCESS TO END-USER - A GUIDELINE TO BUILDING OF FTTX FIBRE OPTIC NETWORK |
04/30115144 DC : DRAFT JUN 2004 | IEC 60793-1-49 - OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY |
BS EN 50700:2014 | Information technology. Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks |
CEI EN 62522 : 2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
09/30211785 DC : 0 | BS ISO/IEC 14763-2 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 2: PLANNING AND INSTALLATION |
BS EN 61758-1:2008 | Fibre optic interconnecting devices and passive components. Interface standard for closures General and guidance |
12/30258880 DC : 0 | BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS |
BS EN 61300-1:2016 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures General and guidance |
BS EN 61280-4-1:2009 | Fibre optic communication subsystem test procedures Installed cable plant. Multimode attenuation measurement |
I.S. EN 61290-5-2:2004 | OPTICAL AMPLIFIERS - TEST METHODS - PART 5-2: REFLECTANCE PARAMETERS - ELECTRICAL SPECTRUM ANALYSER METHOD |
BS EN 62148-17:2014 | Fibre optic active components and devices. Package and interface standards Transmitter and receiver components with dual coaxial RF connectors |
BS EN 61290-2-1:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical spectrum analyzer |
BS EN 186260:1998 | Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type SC |
PD CLC/TR 50510:2012 | Fibre optic access to end-user. A guideline to building of FTTX fibre optic network |
BS EN 62150-1:2005 | Fibre optic active components and devices. Test and measurement procedures General and guidance |
07/30170378 DC : DRAFT AUG 2007 | BS EN 61290-10-1 - OPTICAL AMPLIFIER TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
03/306253 DC : DRAFT MAY 2003 | IEC 60728-11 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY REQUIREMENTS |
CSA Z9919 : 2007 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
I.S. EN 62522:2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
BS EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services Safety |
I.S. EN 61280-4-2:2014 | FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
I.S. EN IEC 61291-1:2018 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
I.S. EN 60728-14:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
ISO/IEC 14763-2:2012 | Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation |
BS EN 50174-3 : 2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
ISO/IEC 14763-3:2014 | Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling |
CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
IEC 62496-4:2011 | Optical circuit boards - Part 4: Interface standards - General and guidance |
EN 61290-5-3:2002 | Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser |
EN 61290-5-2:2004 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
EN 186170 : 1998 | SECTIONAL SPECIFICATION - CONNECTORS SETS FOR OPTICAL FIBRES AND CABLES - TYPE RCC |
EN 62496-1:2009 | Optical circuit boards - Part 1: General |
EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet |
EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
EN 61758-1:2008 | Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance |
EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
EN 61280-4-1:2009 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
EN 62300:2005 | Consumer audio/video equipment digital interface with plastic optical fibre |
EN 62148-17:2014 | Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors |
EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
EN 50700:2014 | Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks |
EN 50411-3-8:2016 | Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C |
EN 60079-28:2015 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
EN 60793-1-49:2006 | OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY |
EN 61290-1:2015 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
EN 62129:2006/corrigendum:2006 | CALIBRATION OF OPTICAL SPECTRUM ANALYZERS |
EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
EN 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
EN 186260:1997 | Sectional Specification: Connector sets for optical fibres and cables - Type SC |
BS EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement |
IEC TS 60825-7:2000 | Safety of laser products - Part 7: Safety of products emitting infrared optical radiation, exclusively used for wireless 'free air' data transmission and surveillance |
CEI EN 61290-11-2 : 2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD |
CEI EN 62496-1 : 2010 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
BS EN 61290-3-2:2008 | Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method |
13/30285534 DC : 0 | BS EN 61290-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1: OPTICAL POWER AND GAIN PARAMETERS |
PD IEC/TR 62324:2007 | Single-mode optical fibres. Raman gain efficiency measurement using continuous wave method. Guidance |
PD IEC/TS 62129-3:2014 | Calibration of wavelength/optical frequency measurement instruments Optical frequency meters using optical frequency combs |
PD IEC TR 61282-1:2000 | Fibre optic communication system design guides Single-mode digital and analogue systems |
03/311628 DC : DRAFT AUG 2003 | IEC 62150-1 ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
CEI EN 62150-1 : 2005 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
BS EN 61290-5-2:2004 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Electrical spectrum analyser method |
12/30265031 DC : 0 | BS EN 60825-12 ED.2 - SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
PD IEC/TR 61292-6:2010 | Optical amplifiers Distributed Raman amplification |
BS EN 61300-3-35:2015 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Visual inspection of fibre optic connectors and fibre-stub transceivers |
11/30246243 DC : 0 | BS EN 62148-17 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
08/30175850 DC : DRAFT JAN 2008 | BS IEC 61746-1 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
BS EN 61290-5-3:2002 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Reflectance tolerance using an electrical spectrum analyser |
07/30163795 DC : 0 | BS EN 61290-11-1 - OPTICAL AMPLIFIERS. TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION - JONES MATRIX EIGENANALYSIS (JME) |
BS EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system |
10/30207290 DC : 0 | BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
98/260896 DC : DRAFT MAR 1998 | IEC 61291-3 ED. 1 - PERFORMANCE SPECIFICATION TEMPLATE ON OPTICAL AMPLIFIERS - PART 3: OPTICAL FIBRE AMPLIFIERS FOR ANALOGUE APPLICATIONS |
09/30180383 DC : 0 | BS EN 61162-450 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - LIGHTWEIGHT SHIP SYSTEMS INTERCONNECTION |
PD IEC TR 60825-14:2004 | Safety of laser products A user\'s guide |
BS EN 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments Michelson interferometer single wavelength meters |
03/318327 DC : DRAFT NOV 2003 | |
06/30153342 DC : DRAFT JULY 2006 | BS IEC 61746 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1 - OTDR FOR SINGLE-MODE FIBRES |
08/30191345 DC : 0 | BS EN 60728-11 ED.3 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
PD IEC/TR 60825-17:2015 | Safety of laser products Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems |
BS EN 61746:2005 | Calibration of optical time-domain reflectometers (OTDR) |
CEI EN 61746-1 : 2012 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
98/261559 DC : DRAFT MAY 1998 | IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD |
I.S. EN 60079-28:2015 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
09/30181956 DC : DRAFT MAY 2009 | BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
CEI EN 61290-1-2 : 2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
SAE ARP 5602/14 : 2013 | A RE-CERTIFICATION GUIDELINE FOR AEROSPACE PLATFORM FIBER OPTIC TRAINING AND AWARENESS EDUCATION AEROSPACE FIBER OPTICS FABRICATOR HANDS-ON COMPETENCIES |
CEI EN 62129-2 : 2012 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
CEI EN 60793-1-49 : 2007 | OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY |
ANSI INCITS 479 : 2011 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 5 (FC-PI-5) |
I.S. EN 50411-3-5:2015 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5: WALL OUTLET |
I.S. EN 186260:1998 | CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE SC (SECTIONAL SPECIFICATION) |
UNI EN ISO 80601-2-61 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
CEI EN 61290-3-2 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
BS ISO/IEC 14763-3 : 2006 | INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING |
I.S. EN 60728-6:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
I.S. EN 61290-1-3:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
I.S. EN 62496-4:2011 | OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
CEI EN 50174-3 : 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
CEI EN 60728-6 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
I.S. EN 61746-1:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
CSA C22.2 No. 80601-2-61 : 2014(R2019) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
NF EN 60950-1 : 2006 AMD 2 2014 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
IEC 60728-11:2016 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
IEC PAS 60793-1-49:2002 | Optical fibres - Part 1-49 : Measurement methods and test procedures - Differential mode delay |
BS EN ISO 80601-2-61:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment |
ISO/IEC 14165-115:2006 | Information technology Fibre Channel Part 115: Physical Interfaces (FC-PI) |
IEC TR 60825-17:2015 | Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems |
IEC 61280-4-1:2009 | Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement |
BS EN 60825-1:2014 | Safety of laser products Equipment classification and requirements |
I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
BIS IS 13252-1 : 2010 AMD 1 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
BIS IS 13252 : 2003 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS |
I.S. EN 61290-7-1:2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
EN 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
NF EN 62496-1 : 2009 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
BS EN 60793-1-49:2006 | Optical fibres Measurement methods and test procedures - Differential mode delay |
17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
03/309914 DC : DRAFT JUNE 2003 | IEC PAS 62129 ED.1.0 - CALIBRATION OF OPTICAL SPECTRUM ANALYZERS |
12/30258456 DC : 0 | BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 61290-10-3:2003 | Optical amplifiers. Test methods Multichannel parameters. Probe methods |
BS EN 60825-12:2004 | Safety of laser products Safety of free space optical communication systems used for transmission of information |
BS EN 61290-10-1:2009 | Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer |
I.S. EN ISO 9919:2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
TS 102 873 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); OPTICAL EXTERNAL NETWORK TESTING INTERFACE |
CEI EN 61300-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
12/30260552 DC : 0 | BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
PD IEC/TR 62627-08:2016 | Fibre optic interconnecting devices and passive components Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter |
BS EN 62496-1:2009 | Optical circuit boards General |
CEI EN 61280-4-1 : 2011 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
I.S. EN 61290-11-2:2005 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD |
03/309966 DC : DRAFT JULY 2003 | IEC 61290-11-2 - OPTICAL AMPLIFIER TEST METHODS - PART 11-2: POLARISATION MODE DISPERSION - POINCARE SPHERE ANALYSIS METHOD |
06/30153345 DC : DRAFT JULY 2006 | BS IEC 61746-2 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2 - OTDR FOR MULTIMODE FIBRES |
PD IEC/TR 62547:2013 | Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results |
DD IEC/PAS 61290-3-1:2002 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer |
02/204735 DC : DRAFT AUG 2002 | IEC 60793-1-49 ED.1 - OPTICAL FIBRE - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY |
18/30342107 DC : DRAFT APR 2018 | BS EN 61315 - CALIBRATION OF FIBRE-OPTIC POWER METERS |
12/30266214 DC : 0 | ISO/IEC CD 14763-3 - IMPLEMENTATION AND OPERATION OF CPC - PART 3: TESTING OF OPTICAL FIBRE CABLING (2ND EDITION) |
BS EN 61290-1-2:2005 | Optical amplifiers. Test methods Power and gain parameters - Electrical spectrum analyzer method |
CEI EN 60728-13 : 2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
BS EN 61290-6-1:1998 | Optical fibre amplifiers. Basic specification Test methods for pump leakage parameters. Optical demultiplexer |
CEI EN 60825-12 : 2005 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
CEI EN 61280-4-2 : 2015 | FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
16/30346304 DC : 0 | BS EN 61162-450 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS -DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION |
IEC TR 62547:2013 | Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results |
09/30206090 DC : 0 | BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE |
04/30110918 DC : DRAFT MAR 2004 | IEC 61290-1-2 ED 2.0 - OPTICAL AMPLIFIER TEST METHODS - PART 1-2: OPTICAL POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
DD IEC PAS 60793-1-49 : DRAFT SEPT 2002 | OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY |
ANSI INCITS 533 : 2016 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 6P (FC-PI-6P) |
NF EN 60825-12 : 2005 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
BS EN 61290-11-1:2008 | Optical amplifiers. Test methods Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME) |
CSA Z9919 :2007 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
DIN V VDE V 0837-7 : 1999 | SAFETY OF LASER PRODUCTS - PART 7: SAFETY OF PRODUCTS EMITTING "INVISIBLE" OPTICAL RADIATION, EXCLUSIVELY USED FOR WIRELESS "FREE AIR" DATA TRANSMISSION AND SURVEILLANCE |
CSA C22.2 No. 60079-28 : 2016 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
SAE AIR 6552/3 : 2016 | NETWORK END-TO-END DATA LINK EVALUATION SYSTEM TRANSCEIVER HEALTH MONITORING |
CEI EN 61315 : 2007 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
I.S. EN 61758-1:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE |
I.S. EN 60825-12:2004 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
I.S. EN 61290-3-1:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
I.S. EN 50174-3:2013 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
ISO/IEC 14575:2000 | Information technology — Microprocessor systems — Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction) |
PD IEC/TR 61292-4:2014 | Optical amplifiers Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers |
I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
I.S. EN 62300:2005 | CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE WITH PLASTIC OPTICAL FIBRE |
PREN 50174-3 : DRAFT 2012 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
I.S. EN 61300-1:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
CEI EN 61758-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE |
CSA ISO/IEC 14763-3 : 2015 | INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING |
EN ISO 80601-2-61:2011 | Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011) |
NF EN ISO 80601-2-61 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
UNE-EN 60728-11:2012 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
IEC 62522:2014 | Calibration of tuneable laser sources |
IEC PAS 61290-3-1:2002 | Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer |
IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
CLC/TR 50510:2012 | Fibre optic access to end-user - A guideline to building of FTTX fibre optic network |
BS EN ISO 9919:2009 | Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
IEC 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
UNE-EN 60825-1:2015 | Safety of laser products - Part 1: Equipment classification and requirements |
I.S. EN 60825-1:2014 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS |
CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
EN ISO 9919:2009 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005) |
UNI EN ISO 9919 : 2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
EN 61290-11-1:2008 | Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) |
08/30177575 DC : DRAFT FEB 2008 | BS EN 61300-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
IEC 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
10/30240050 DC : DRAFT DEC 2010 | BS EN 61280-4-2 - FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLEMODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
99/201577 DC : DRAFT MAR 1999 | IEC 60728-6. ED.1 - CABLED DISTRIBUTION SYSTEMS FOR TELEVISION AND SOUND SIGNALS - PART 6: OPTICAL EQUIPMENT |
BS EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology |
I.S. EN 60728-13-1:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM |
CEI EN 61290-6-1 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR PUMP LEAKAGE PARAMETERS - OPTICAL DEMULTIPLEXER |
17/30331301 DC : 0 | BS ISO/IEC 14763-3 AMENDMENT 1 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING |
12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN IEC 61291-1:2018 | Optical amplifiers Generic specification |
IEC TS 60825-6:1999 | Safety of laser products - Part 6: Safety of products with optical sources, exclusively used for visible information transmission to the human eye |
CEI EN 61746-2 : 2012 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
IEC PAS 62129:2004 | Calibration of optical spectrum analyzers |
03/313421 DC : DRAFT NOV 2003 | IEC 60079-28 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 28: RISK OF IGNITION BY RADIATION OF EXPLOSIVE ATMOSPHERES OF GAS, VAPOUR OR MIST FROM OPTICAL RADIATION EQUIPMENT AND TRANSMISSION SYSTEMS |
15/30326655 DC : 0 | BS EN 61280-4-1 - FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
CEI EN 61291-1 : 2013 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
BS EN 61746-2:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres |
BS EN 61290-1:2015 | Optical amplifiers. Test methods Power and gain parameters |
BS EN 62522:2014 | Calibration of tuneable laser sources |
I.S. EN 62148-17:2014 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
11/30249050 DC : 0 | BS EN 61291-1 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
03/309903 DC : DRAFT JUNE 2003 | IEC 61315 ED.2.0 - CALIBRATION OF FIBRE-OPTIC POWER METERS |
BS EN 62496-4:2011 | Optical circuit boards Interface standards. General and guidance |
02/203624 DC : DRAFT FEB 2002 | IEC 62300. ED.1.0 - CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE WITH PLASTIC OPTICAL FIBRE |
16/30325971 DC : 0 | BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
CEI EN 61290-2-2 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-2: TEST METHODS FOR OPTICAL POWER PARAMETERS - ELECTRICAL SPECTRUM ANALYZER |
04/30110909 DC : DRAFT MAR 2004 | IEC 61291-1 ED 2.0 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
BS EN 62300:2005 | Consumer audio/video equipment digital interface with plastic optical fibre |
BS EN 61290-3-1:2003 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method |
I.S. EN 60728-11:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
BS EN 62129:2006 | Calibration of optical spectrum analyzers |
CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
CSA ISO/IEC 14165-115 : 2006 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 115: PHYSICAL INTERFACES (FC-PI) |
IEC TR 62627-08:2016 | Fibre optic interconnecting devices and passive components - Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter |
EN IEC 61291-1:2018 | Optical amplifiers - Part 1: Generic specification |
ISA TR12.21.01 : 2004 | USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS |
ANSI INCITS 450 : 2009 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-4 (FC-PI-4) |
EN 50174-3:2013/A1:2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
BS EN 61162-450:2011 | Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ethernet interconnection |
I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
I.S. EN 62129-2:2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
CEI EN 61290-7-1 : 2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
ARINC 807-3 : 2013 | FIBER OPTIC TRAINING REQUIREMENTS |
SAE AIR 6112 : 2014 | A GUIDELINE FOR AEROSPACE PLATFORM FIBER OPTIC EXPANDED BEAM INTERCONNECT TECHNOLOGY |
BIS IS/IEC 60079-28 : 2006 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
IEEE 802.3-2012 | IEEE Standard for Ethernet |
CEI EN 186260 : 1998 | SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE SC |
IEC TS 62129-3:2014 | Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs |
IEC TR 61292-4:2014 | Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers |
I.S. EN 61290-10-1:2009 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
IEC TR 62324:2007 | Single-mode optical fibres - Raman gain efficiency measurement using continuous wave method - Guidance |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
I.S. EN 61746-2:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
EN 61746-1:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES (IEC 61746-1:2009) |
EN 61746-2:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
IEC 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General principles, acceptance conditions |
BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
IEC 62129:2006 | Calibration of optical spectrum analyzers |
IEC 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
IEC 61290-11-1:2008 | Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME) |
IEC 61290-5-2:2003 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
17/30361391 DC : 0 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
IEC 61746-1:2009 | Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single mode fibres |
IEC 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
IEC 62148-17:2013 | Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors |
IEC 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
IEC 62300:2004 | Consumer audio/video equipment digital interface with plastic optical fibre |
IEC 61746:2005 | Calibration of optical time-domain reflectometers (OTDR) |
IEC 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
IEC 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
IEC 62496-1:2008 | Optical circuit boards - Part 1: General |
IEC 61315:2005 | Calibration of fibre-optic power meters |
BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
IEC 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
IEC 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
IEC 62150-1:2005 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance |
IEC 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters |
IEC 61290-11-2:2005 | Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method |
IEC 61758-1:2008 | Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance |
IEC 61300-3-35:2015 RLV | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers |
IEC 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
IEC 60793-1-49:2006 | Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay |
IEC 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
BS EN ISO 15616-1:2003 | Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting General principles, acceptance conditions |
EN 61162-450:2011/A1:2016 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION |
EN ISO 15616-1:2003 | Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
ISO 80601-2-61:2017 | Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
PD IEC PAS 62129:2004 | Calibration of optical spectrum analyzers |
BS EN 61315:2006 | Calibration of fibre-optic power meters |
BS EN 61746-1:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for single-mode fibres |
CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN 61290-11-2:2005 | Optical amplifiers. Test methods Polarization mode dispersion parameter - Poincaré sphere analysis method |
UNE-EN 60079-28:2016 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
BS EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services Optical equipment |
I.S. EN 60728-13:2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
BS EN 61290-1-3:2015 | Optical amplifiers. Test methods Power and gain parameters. Optical power meter method |
BS EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions |
CEI 76-11 : 2011 | SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE |
BS EN 50411-3-5:2015 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Wall outlet |
14/30296100 DC : 0 | BS EN 61290-1-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
IEC TR 61292-6:2010 | Optical amplifiers - Part 6: Distributed Raman amplification |
CEI EN 61290-10-1 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER |
BS EN 186300:1999 | Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables type MSC |
I.S. EN ISO 80601-2-61:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
I.S. EN 61290-1-2:2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
BS IEC 60825-6 : 1999 | SAFETY OF LASER PRODUCTS - PART 6: SAFETY OF LASER PRODUCTS WITH OPTICAL SOURCES, EXCLUSIVELY USED FOR VISIBLE INFORMATION TRANSMISSION TO THE HUMAN EYE |
16/30316718 DC : 0 | BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
CEI EN 61290-11-1 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME) |
BS EN 61290-7-1:2007 | Optical amplifiers. Test methods Out-of-band insertion losses. Filtered optical power meter method |
BS EN 60079-28:2015 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
03/111613 DC : DRAFT AUG 2003 | BS EN ISO 9919 - MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
IEC TR 61282-1:2000 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
CAN/CSA-ISO/IEC 14165-115:2006(R2016) | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 115: PHYSICAL INTERFACES (FC-PI) |
I.S. EN 61291-1:2012 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION (IEC 61291-1:2012 (EQV)) |
CEI EN 62496-4 : 2012 | OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
SAE AIR 6031 : 2012 | FIBER OPTIC CLEANING |
ISO/IEC 11801-1:2017 | Information technology — Generic cabling for customer premises — Part 1: General requirements |
CEI EN 60728-11 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
I.S. EN 61280-4-1:2009 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
ANSI INCITS 512 : 2015 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-6 (FC-PI-6) |
I.S. EN 62150-1:2005 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
I.S. EN 50700:2014 | INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
I.S. EN 61300-3-35:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - VISUAL INSPECTION OF FIBRE OPTIC CONNECTORS AND FIBRE-STUB TRANSCEIVERS |
I.S. EN 50411-3-8:2016 | FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C |
I.S. EN 61290-11-1:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME) |
I.S. EN 61290-1:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAINPARAMETERS |
I.S. EN 61162-450:2011 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION (IEC 61162-450:2011/A1:2016) |
UNE-EN 61300-1:2017 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
CEI EN 60079-28 : 2016 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
CEI EN 61290-2-3 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PARTS 2-3: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER |
I.S. EN 60793-1-49:2006 | OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY |
ISO/IEC/IEEE 8802-3:2017 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet |
S.R. CLC/TR 50510:2012 | FIBRE OPTIC ACCESS TO END-USER - A GUIDELINE TO BUILDING OF FTTX FIBRE OPTIC NETWORK |
IEC TR 60825-14:2004 | Safety of laser products - Part 14: A user's guide |
I.S. EN 61315:2006 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
I.S. EN 62496-1:2009 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
I.S. EN 61290-10-3:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-3: MULTICHANNEL PARAMETERS - PROBE METHODS |
I.S. EN 61746:2005 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) |
EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
IEC 61290-1:2014 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
11/30258071 DC : 0 | BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
ISO 9919:2005 | Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
IEC 61746-2:2010 | Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres |
IEC 61290-10-3:2002 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
IEC 61290-5-3:2002 | Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer |
EN 61290-10-3:2003 | Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods |
EN 61290-10-1:2009 | Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
EN 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
EN 61300-3-35:2015 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers |
EN 61300-1:2016 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
EN 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
EN 61746:2005 | Calibration of optical time-domain reflectometers (OTDR) |
EN 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
EN 61291-1:2012 | Optical amplifiers - Part 1: Generic specification |
NF EN 61280-4-1 : 2010 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
EN 62150-1:2005 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance |
EN 61290-11-2:2005 | Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method |
EN 62496-4:2011 | Optical circuit boards - Part 4: Interface standards - General and guidance |
EN 62522:2014 | Calibration of tuneable laser sources |
EN 61315:2006 | Calibration of fibre-optic power meters |
EN 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
CEI EN 62148-17 : 2014 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
HRD 5 : 94 + ERRATA | HANDBOOK OF RELIABILITY DATA FOR COMPONENTS USED IN TELECOMMUNICATIONS SYSTEMS |
IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
IEC 60794-3-10:2015 | Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables |
IEC 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
IEC TR 60825-14:2004 | Safety of laser products - Part 14: A user's guide |
MIL-HDBK-217 Revision F:1991 | RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT |
FMD 1991 : 1991 | FAILURE MODE/MECHANISM DISTRIBUTIONS |
IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
IEC 60794-3-20:2016 | Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables |
IEC 60794-4-1:1999 | Optical fibre cables - Part 4-1: Aerial optical cables for high-voltage power lines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.