IEC 60751:2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial platinum resistance thermometers and platinum temperature sensors
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
27-01-2022
Superseded by
Language(s)
English - French
Published date
17-07-2008
Publisher
IEC 60751:2008 specifies the requirements and temperature/resistance relationship for industrial platinum resistance temperature sensors later referred to as "platinum resistors" or "resistors" and industrial platinum resistance thermometers later referred to as "thermometers" whose electrical resistance is a defined function of temperature. Values of temperature in this standard are in terms of the International Temperature Scale of 1990, ITS-90. Temperatures in degrees Celsius are denoted by the symbol t, except in Table 1 where the full nomenclature t90/°C is used. The standard covers resistors or thermometers for all or part of the temperature range 200 °C to +850 °C with different tolerance classes, which may cover restricted temperature ranges. This second edition cancels and replaces the first edition published in 1983, amendment 1 (1986) and amendment 2 (1995). It constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: While the temperature/resistance relationship in 4.2 remains unchanged, there are several changes in the other chapters. Most important are: tolerance classes follow a new scheme; tolerance acceptance test is included; hysteresis test is included; several changes in the individual tests; appendices are deleted.
| Committee |
TC 65/SC 65B
|
| DevelopmentNote |
Supersedes RM.AERO 80121. (05/2015) Stability Date: 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
41
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| OVE/ONORM EN 60751 : 2009 | Identical |
| NEN EN IEC 60751 : 2008 | Identical |
| I.S. EN 60751:2008 | Identical |
| SAC GB/T 30121 : 2013 | Identical |
| UNE-EN 60751:2008 | Identical |
| BS EN 60751:2008 | Identical |
| EN 60751:2008 | Identical |
| UNE-EN 60751:1996 | Identical |
| PNE-prEN 60751 | Identical |
| DIN IEC 60751:1990-12 | Identical |
| UNE 20751:1993 | Identical |
| BS 1904:1984 | Identical |
| PN EN 60751 : 2009 | Identical |
| NEN 10751 : 95 AMD 2 1995 | Identical |
| NF EN 60751 : 2008 | Identical |
| DIN EN 60751:2009-05 | Identical |
| CEI EN 60751 : 2009 | Identical |
| NF EN 1434-2 : 2016 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| 17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 60068-3-7:2002 | Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load) |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| 15/30291038 DC : 0 | BS ISO 19291 - TESTING OF LUBRICANTS - TRIBOLOGICAL TEST IN THE TRANSLATORY OSCILLATION APPARATUS - DETERMINATION OF TRIBOLOGICAL QUANTITIES FOR OILS AND GREASES IN THE TRANSLATORY OSCILLATION APPARATUS |
| CSA C900.5 : 2013 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
| NF EN 1434-4 : 2016 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 16/30312922 DC : 0 | BS ISO 18888 - GAS TURBINE COMBINED CYCLE POWER PLANTS THERMAL PERFORMANCE TESTS |
| 14/30291768 DC : 0 | BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| I.S. EN 61987-1:2007 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
| PD ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| 14/30291756 DC : 0 | BS EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| BS EN 60068-3-6:2002 | Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| IEC 60350-2:2017 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| BS ISO 4625-1 : 2004 AMD 16196 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| 16/30312501 DC : 0 | BS ISO 19618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MEASUREMENT METHOD FOR NORMAL SPECTRAL EMISSIVITY USING BLACKBODY REFERENCE WITH AN FTIR SPECTROMETER |
| IP 527 : 2015 | PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF LOW-TEMPERATURE CONE PENETRATION OF LUBRICATING GREASES |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| AAMI ISO 11140-4 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| CEI EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD) |
| BS ISO 13737:2004 | Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination of low-temperature cone penetration of lubricating greases |
| EN 60350-2:2018 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
| ONORM EN ISO 18472 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
| I.S. EN ISO 15970:2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
| OIML R 75-1 : 2002 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| ISO 6182-1:2014 | Fire protection — Automatic sprinkler systems — Part 1: Requirements and test methods for sprinklers |
| NF EN 60947-8 : 2003 AMD 2 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES |
| I.S. EN 1434-4:2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| ISO 19291:2016 | Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus |
| BS EN 1434-1 : 2015 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| NF EN 60068-3-6 : 2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| ASTM D 5771 : 2017 : REDLINE | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method) |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
| PD CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete. Internal structural damage |
| BS EN ISO 4625-1:2006 | Binders for paint and varnishes. Determination of softening point Ring-and-ball method |
| IEC 60068-3-5:2018 RLV | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| EN 12953-11:2003 | Shell boilers - Part 11: Acceptance tests |
| IEC 60068-3-6:2018 RLV | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
| EN 60947-8:2003/A2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011) |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| NF EN 285 : 2016 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete - Internal structural damage |
| CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
| DIN EN 14705:2005-10 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers; German version EN 14705:2005 |
| EN 60068-3-6:2002 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers |
| ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
| BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
| 12/30248648 DC : DRAFT AUG 2012 | BS EN 16442 - CONTROLLED ENVIRONMENT STORAGE CABINET FOR DISINFECTED THERMOLABILE ENDOSCOPES |
| PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| 16/30339586 DC : 0 | BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| I.S. EN 11140-4:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| 99/124125 DC : DRAFT NOV 1999 | BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS |
| BS EN 16242:2012 | Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| 02/121895 DC : DRAFT APR 2002 | BS EN 13060 - SMALL STEAM STERILIZERS |
| 14/30291759 DC : 0 | BS EN 1434-5 - HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
| PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 17/30309582 DC : 0 | BS EN 60350-2 ED 2.0 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| DIN EN ISO 18472:2006-10 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
| DIN EN ISO 15970:2014-09 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
| 06/30160085 DC : 0 | BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
| BS EN 60534-2-3:2016 | Industrial-process control valves Flow capacity. Test procedures |
| BS ISO 17714:2007 | Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
| AAMI ISO 11140-5 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
| PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| 17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| ASTM E 3137/E3137M : 2017 | Standard Specification for Heat Meter Instrumentation |
| AAMI ISO 11140-4 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| NF EN 16442 : 2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) — General requirements |
| OIML R 84 : 2003 | PLATINUM, COPPER, AND NICKEL RESISTANCE THERMOMETERS (FOR INDUSTRIAL AND COMMERCIAL USE) |
| I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS EN 1434-2 : 2015 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| I.S. EN 60068-3-5:2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| BS EN ISO 18472:2006 | Sterilization of health care products. Biological and chemical indicators. Test equipment and methods |
| EN ISO 18472:2006 | Sterilization of health care products - Biological and chemical indicators - Test equipment (ISO 18472:2006) |
| I.S. EN 60068-3-7:2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND B (WITH LOAD) |
| I.S. EN IEC 60068-3-5:2018 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| I.S. EN 1434-1:2015 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| EN 1434-2:2015 | Heat meters - Part 2: Constructional requirements |
| EN IEC 60068-3-6:2018/AC:2018-05 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
| UNE-EN 1434-4:2016 | Heat meters - Part 4: Pattern approval tests |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| OIML R 75-2 : 2002 | HEAT METERS - PART 2: TYPE APPROVAL TESTS AND INITIAL VERIFICATION TESTS |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| PREN 17066-1 : DRAFT 2016 | INSULATED MEANS OF TRANSPORT FOR TEMPERATURE SENSITIVE GOODS - REQUIREMENTS AND TESTING - PART 1: CONTAINER |
| IEC 60737:2010 | Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods |
| UNE-EN 1434-2:2016 | Heat meters - Part 2: Constructional requirements |
| IEC PAS 61987-1:2002 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
| I.S. EN 60947-8:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV)) |
| DIN EN 16242:2013-03 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| DIN EN 14597:2015-02 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| DIN EN 15758:2010-12 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects |
| BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| DIN EN 1434-4:2019-08 | Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
| I.S. EN 14597:2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| I.S. EN 16242:2012 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| I.S. EN ISO 4892-1:2016 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| I.S. EN ISO 3679:2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| DIN EN ISO 4625-1:2006-04 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| VDI 3786 Blatt 3:2012-10 | Environmental meteorology - Meteorologial measurements - Air temperature |
| VDI/VDE 3512 Blatt 2:2017-03 | Temperature measurement for building automation - Temperature sensors, temperature sensing elements and their measurement parameters |
| VDI 3786 Blatt 4:2013-06 | Environmental meteorology - Meteorological measurements - Air humidity |
| VDI/VDE 3512 Blatt 4:2017-03 | Temperature measurement for building automation - Testing of temperature sensors |
| OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
| BS EN 60350-2 : 2013 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE |
| CEI EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| API MPM CH7.3 : 2011(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| DIN EN ISO 15970 E : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
| BS ISO 19291:2016 | Lubricants. Determination of tribological quantities for oils and greases. Tribological test in the translatory oscillation apparatus |
| BS IEC 60737:2010 | Nuclear power plants. Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit). Characteristics and test methods |
| ISO 8310:2012 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank thermometers on board marine carriers and floating storage |
| CEI EN 60068-3-6 : 2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| I.S. CEN TR 15177:2006 | TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE |
| BS ISO 19618:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer |
| I.S. EN IEC 60068-3-6:2018 COR 2018 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
| 02/103093 DC : DRAFT APR 2002 | BS 12390-9 - TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
| BS EN ISO 15970:2014 | Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor |
| EN IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| NF ISO 14661 : 2000 AMD 1 2004 | THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
| BS 2000-523(2015) : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| 07/30170559 DC : DRAFT AUG 2007 | BS ISO 2314 - GAS TURBINES - ACCEPTANCE TESTS |
| 04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS ISO 11140-5:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators for Bowie and Dick-type air removal tests |
| AAMI ISO 11140-5 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
| BS ISO 15970 : 2008 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
| BS EN 60068-3-5:2002 | Environmental testing. Guidance Confirmation of the performance of temperature chambers |
| IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| API MPM CH7.3:2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| EN 13060:2014 | Small steam sterilizers |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 1434-5:2015 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
| PREN 1434-4 : DRAFT 2014 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| NF EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| DIN EN 1434-2:2016-02 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| I.S. EN 16442:2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
| ISO 11140-5:2007 | Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| API 551 : 2016 | PROCESS MEASUREMENT |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| DIN EN 12259-1:2006-03 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| BS EN 1434-5:2015 | Heat meters Initial verification tests |
| ISO 15883-1:2006 | Washer-disinfectors — Part 1: General requirements, terms and definitions and tests |
| IEC 60068-3-7:2001 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
| EN 60068-3-7:2002 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
| I.S. EN ISO 4625-1:2006 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| EN ISO 4625-1:2006 | Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
| ONORM EN ISO 4625-1 : 2006 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI EN 14597 : 2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
| UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| UNI EN 16242 : 2013 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| API MPM CH7.3 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| 12/30244792 DC : 0 | BS ISO 8310 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK THERMOMETERS ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
| BS EN 1434-4 : 2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 08/30173520 DC : DRAFT FEB 2008 | BS EN 15758 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| PD CEN/TS 12390-9:2016 | Testing hardened concrete Freeze-thaw resistance with de-icing salts. Scaling |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
| CSA C900.2 : 2013 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| 16/30330536 DC : 0 | BS EN ISO 18472 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
| PREN 1434-2 : DRAFT 2014 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| DIN 43735:2011-06 | PROCESS CONTROL TECHNOLOGY - ELECTRICAL TEMPERATURE SENSORS - REPLACEABLE INSERTS FOR RTDS AND THERMOCOUPLES |
| BS EN 60947-8:2003 | Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines |
| 04/30112930 DC : DRAFT APR 2004 | IEC 61987-1 ED.1 - INDUSTRIAL PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
| 16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| 14/30295943 DC : 0 | BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
| 14/30312597 DC : 0 | BS EN 62828-3 ED.1 IEC 62828-3 ED.1 - REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 3: SPECIFIC PROCEDURES FOR TEMPERATURE TRANSMITTERS |
| PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| BS ISO 2314:2009 | Gas turbines. Acceptance tests |
| UNE-EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
| EN 1434-4:2015 | Heat meters - Part 4: Pattern approval tests |
| 10/30219217 DC : 0 | BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
| 13/30285144 DC : 0 | BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS EN 61987-1:2007 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Measuring equipment with analogue and digital output |
| DIN EN 1434-4:2016-02 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 09/30165791 DC : 0 | BS IEC 60737 - NUCLEAR POWER PLANT - INSTRUMENTATION IMPORTANT TO SAFETY - TEMPERATURE SENSORS (INCORE AND PRIMARY COOLANT CIRCUIT): CHARACTERISTICS AND TEST METHODS |
| BS ISO 6487 : 2015 | ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
| DIN EN 16442:2015-05 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 15/30330287 DC : DRAFT AUG 2015 | BS EN 60068-3-5 - ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| I.S. EN 60068-3-6:2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| UNE-EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
| S.R. CEN/TS 12390-9:2016 | TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE WITH DE-ICING SALTS - SCALING |
| ISO 13737:2004 | Petroleum products and lubricants — Determination of low-temperature cone penetration of lubricating greases |
| 16/30348307 DC : 0 | BS EN 17066-1 - INSULATED MEANS OF TRANSPORT FOR TEMPERATURE SENSITIVE GOODS - REQUIREMENTS AND TESTING - PART 1: CONTAINER |
| 17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| DIN EN 1434-5:2016-02 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
| DIN EN 1434-1:2016-02 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 13060:2015 | Small steam sterilizers |
| ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| ISO 18472:2006 | Sterilization of health care products — Biological and chemical indicators — Test equipment |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| I.S. EN ISO 18472:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
| IEC 60068-3-6:2018 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
| I.S. CEN TS 12390-9:2006 | TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
| UNE-EN 1434-1:2016 | Heat meters - Part 1: General requirements |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN ISO 4892-1:2016-10 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| BS EN ISO 11140-4:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| IEC 61987-1:2006 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
| IEC 60947-8:2003+AMD1:2006+AMD2:2011 CSV | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
| UNE-EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| BS EN 867-4:2001 | Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
| ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
| BS EN 14705:2005 | Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers |
| UNE-EN 16242:2014 | Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| ISO 4625-1:2004 | Binders for paints and varnishes — Determination of softening point — Part 1: Ring-and-ball method |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| ISO 6182-9:2005 | Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| BS EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 6182-10:2014 | Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| BS EN 15758:2010 | Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
| UNE-EN 15758:2011 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| UNE-EN ISO 4892-1:2017 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| ISO 15970:2008 | Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
| EN ISO 11140-4:2007 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| EN 14705:2005 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers |
| EN 15758:2010 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
| BS ISO 8310:2012 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank thermometers on board marine carriers and floating storage |
| PREN 1434-5 : DRAFT 2014 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
| DIN ISO 17714:2008-06 | METEOROLOGY - AIR TEMPERATURE MEASUREMENTS - TEST METHODS FOR COMPARING THE PERFORMANCE OF THERMOMETER SHIELDS/SCREENS AND DEFINING IMPORTANT CHARACTERISTICS |
| ISO 18888:2017 | Gas turbine combined cycle power plants — Thermal performance tests |
| DKD-R 5-6 : 2008 | |
| BS 2000-527(2004) : 2004 | METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-527: PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF LOW-TEMPERATURE CONE PENETRATION OF LUBRICATING GREASES |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| 06/30151216 DC : DRAFT JUN 2006 | |
| 07/30127284 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| DD CEN/TS 12390-9:2006 | Testing hardened concrete Freeze-thaw resistance. Scaling |
| BS ISO 18888:2017 | Gas turbine combined cycle power plants. Thermal performance tests |
| CSA C900.4 : 2013 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| API MPM CH7.5 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.5: TEMPERATURE DETERMINATION - AUTOMATIC TANK TEMPERATURE MEASUREMENT ONBOARD MARINE VESSELS CARRYING REFRIGERATED HYDROCARBON AND CHEMICAL GAS FLUIDS |
| UNI EN 15758 : 2010 | CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
| UNI EN ISO 15970 : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
| CSA C900.1 : 2013 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60534-2-3:2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES |
| ISO 19618:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer |
| ISO 17714:2007 | Meteorology — Air temperature measurements — Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
| EN 1434-1:2015 | Heat meters - Part 1: General requirements |
| AAMI ISO 18472 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
| I.S. EN 60350-2:2018 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN 1434-2:2015 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
| FD X07 029-1 : 2002 FD | METROLOGY - CALIBRATION AND VERIFICATION PROCEDURE FOR THERMOMETERS - PART 1: CALIBRATION AND VERIFICATION PROCEDURE FOR PROBES AND RESISTANCE THERMOMETERS |
| EN 1434-5:2015 | Heat meters - Part 5: Initial verification tests |
| UNE-EN 1434-5:2016 | Heat meters - Part 5: Initial verification tests |
| ISO 6487:2015 | Road vehicles — Measurement techniques in impact tests — Instrumentation |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| BS EN 12259-1:1999 | Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers |
| BS EN 12953-11:2003 | Shell boilers Acceptance tests |
| UNE-EN 14597:2014 | Temperature control devices and temperature limiters for heat generating systems |
| NF EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND TEST B (WITH LOAD) |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| EN 61987-1:2007 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
| EN 60068-3-5:2002 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| EN 60534-2-3:2016 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| EN 12405-3:2015 | Gas meters - Conversion devices - Part 3: Flow computer |
| DIN EN ISO 4892-1:2001-09 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| CAN/CSA-ISO 11140-5:18 | CAN/CSA-ISO 11140-5:18 - Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests (Adopted ISO 11140-5:2007, second edition, 2007-03-15) |
| CAN/CSA-ISO 11140-4:18 | CAN/CSA-ISO 11140-4:18 - Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (Adopted ISO 11140-4:2007, second edition, 2007-03-15) |
| API MPMS CH7.3:2011(R2021) | Temperature Determination-Fixed Automatic Tank Temperature Systems, 2nd Edition |
| PIP PCETE001 : 2014 | TEMPERATURE MEASUREMENT GUIDELINES |
| PIP PCCTE001 : 2014 | TEMPERATURE MEASUREMENT DESIGN CRITERIA |
| AASHTO T 228:2022 | Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials |
| UNE-EN 60350-2:2014 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| PIP PCSPS001 : 2015 | PACKAGED EQUIPMENT INSTRUMENTATION SPECIFICATION |
| IEC 61298-1:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations |
| IEC 61152:1992 | Dimensions of metal-sheathed thermometer elements |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.