IEC 60728-6:2011
Current
Current
The latest, up-to-date edition.
Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, English - French
Published date
11-04-2011
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
IEC 60728-6:2011 lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for television signals, sound signals and interactive services. This third edition cancels and replaces the second edition published in 2003 of which it constitutes a technical revision. It includes the following significant technical changes with respect to the previous edition:
- The normative references were updated.
- The methods of measurement for optical power and return loss were substituted by references to other standards.
- The method of measurement for polarization dependent loss was deleted.
- A method of measurement for carrier-to-crosstalk ratio (CCR) was added.
- The methods of measurement for CSO and CTB of optical amplifiers were substituted by a method of measurement for microscopic gain tilt of optical amplifiers.
This parameter can be used for calculating the second order distortion of optical amplifiers according to the method described in the new Annex B. New classes for optical transmitters and receivers have been defined.
| Committee |
TC 100/TA 5
|
| DevelopmentNote |
Stability Date: 2020. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 60728-6 : 2011 | Identical |
| NEN EN IEC 60728-6 : 2011 | Identical |
| I.S. EN 60728-6:2011 | Identical |
| PN EN 60728-6 : 2011 | Identical |
| DIN EN 60728-6 : 2012 | Identical |
| VDE 0855-6 : 2012 | Identical |
| CEI EN 60728-6 : 2012 | Identical |
| EN 60728-6:2011 | Identical |
| UNE-EN 60728-6:2011 | Identical |
| BS EN 60728-6:2011 | Identical |
| PNE-EN 60728-6 | Identical |
| I.S. EN 61290-3-2:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| 05/30130532 DC : DRAFT MAR 2005 | CENELEC TR 50460 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - SYSTEM GUIDELINES FOR ANALOGUE OPTICAL TRANSMISSION SYSTEMS |
| 03/311342 DC : DRAFT JULY 2003 | IEC 60728-10 ED.2.0 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE OF RETURN PATH (TA5) |
| CEI CLC/TR 50460 : 2005 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - SYSTEM GUIDELINES FOR ANALOGUE OPTICAL TRANSMISSION SYSTEMS |
| CEI CLC/TR 50083-10-1 : 2009 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS |
| I.S. EN 50173-4:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| IEC 60728-9:2000 | Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals |
| UNE-EN 60728-3:2012 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
| S.R. CLC/TR 50083-10-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS |
| UNE-EN 50083-2:2013 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
| EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
| EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
| EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| BS EN 61290-3-2:2008 | Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method |
| CEI EN 60728-13-1 : 2013 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM |
| BS EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system |
| CEI EN 61290-3-2 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
| I.S. EN 60728-3:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS |
| I.S. EN 50083-2:2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| IEC TR 60728-6-1:2006 | Cable networks for television signals, sound signals and interactive services - Part 6-1: System guidelines for analogue optical transmission systems |
| IEC 60728-3:2017 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
| I.S. EN 60728-13-1:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM |
| CEI EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| CEI EN 60728-13 : 2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
| EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| IEC 60728-3:2017 RLV | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
| IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| IEC 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
| BS EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology |
| BS EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| BS EN 60728-3:2011 | Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks |
| CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks |
| BS EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services System performance for return paths |
| I.S. EN 60728-14:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
| IEC 60728-2:2018 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| IEC 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
| IEC 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
| IEC 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return paths |
| I.S. EN 60728-13:2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| BS EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions |
| PD CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services Guidelines for the implementation of return paths in cable networks |
| 03/311340 DC : DRAFT JULY 2003 | IEC 60728-3 ED.3.0 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE COAXIAL WIDEBAND DISTRIBUTION EQUIPMENT (TA5) |
| 08/30185648 DC : 0 | BS EN 60728-13 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
| I.S. EN 60728-10:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS |
| I.S. EN IEC 60728-3:2018 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5) |
| EN IEC 60728-3:2018 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5) |
| BS EN 50173-4 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| NF EN 60728-14 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
| EN 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| CEI EN IEC 60728-106:2023 | Cable networks for television signals, sound signals and interactive services Part 106: Optical equipment for systems loaded with digital channels only |
| IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
| IEC 60728-11:2016 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| EN 300 019-1-3 : 2.4.1 | ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-3: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT WEATHERPROTECTED LOCATIONS |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC 60050-731:1991 | International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication |
| IEC 61280-1-3:2010 | Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement |
| IEC 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC TR 61292-4:2014 | Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers |
| IEC 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| IEC 60728-3:2010 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
| IEC 60169-2:1965 | Radio-frequency connectors. Part 2: Coaxial unmatched connector |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| IEC 61290-6-1:1998 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer |
| IEC TR 60728-6-1:2006 | Cable networks for television signals, sound signals and interactive services - Part 6-1: System guidelines for analogue optical transmission systems |
| IEC 61290-1-1:2015 | Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 60728-2:2010 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| IEC 61291-4:2011 | Optical amplifiers - Part 4: Multichannel applications - Performance specification template |
| IEC 61280-1-1:2013 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| IEC 60728-5:2015 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
| IEC TR 61931:1998 | Fibre optic - Terminology |
| IEC 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61300-3-6:2008 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
| IEC 61280-2-2:2012 | Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement |
| IEC 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61291-5-2:2017 | Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers |
| IEC 61291-1:2012 | Optical amplifiers - Part 1: Generic specification |
| IEC TR 61282-4:2013 | Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects |
| IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 60169-24:1991 | Radio-frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) |
| IEC 61281-1:1999 | Fibre optic communication subsystems - Part 1:Generic specification |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-2-48:1982 | Environmental testing - Part 2: Tests. Guidance on the application of the tests of IEC 68 to simulate the effects of storage |
| IEC 61754-4:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
| IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.