IEC 60728-11:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
15-02-2023
24-03-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Fundamental requirements
5 Protection against environmental influences
6 Equipotential bonding and earthing
7 Mains-supplied equipment
8 Remote power feeding in cable networks
9 Protection against contact and proximity to electric power
distribution systems
10 System outlets and transfer points
11 Protection against atmospheric overvoltages and elimination
of potential differences
12 Mechanical stability
Annex A (informative) - Earth loop impedance
Annex B (informative) - Use of shield wires to protect
installations with coaxial cables
Annex C (informative) - Differences in some countries
Bibliography
IEC 60728-11:2016 deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans. This fourth edition cancels and replaces the third edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Correction of minimum cross-section of bonding conductor in Figure 6, Figure 14 and Figure 17.
- Creation of new symbols for "overvoltage protective device - (OPD)" and for "coaxial overvoltage protective device - (COPD)".
- Introduction of new OPD symbol to 3.2, Figure 3 and Figure 6.
- Introduction of new COPD symbol to 3.2 and Figure 19.
- In 3.1 replacement of terms CATV, MATV and SMATV by new terms and definitions due to changes in technology and use of cable networks.
- Extension for remote feeding voltage on subscriber feeder.
- Adaption to Edition 2.0 of the IEC 62305 series.
- Deletion of informative Annex C and normative reference to the simplified software for the calculation of risk due to lightning (Annex J of IEC 62305-2:2006.)
- New subclause 10.2.6 Fully-isolated system outlet provided by means of a FTTH system. The contents of the corrigendum of July 2016 have been included in this copy.
Committee |
TC 100/TA 5
|
DevelopmentNote |
Stability Date: 2018. (04/2016)
|
DocumentType |
Standard
|
Pages |
163
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN 60728-11:2017 | Identical |
NEN EN IEC 60728-11 : 2017 | Identical |
DIN EN 60728-11 : 2017 | Identical |
VDE 0855-1 : 2017 | Identical |
CEI EN 60728-11 : 2014 | Identical |
BS EN 60728-11:2017 | Identical |
SN EN 60728-11 : 2017 | Identical |
ONORM OVE EN 60728-11 : 2017 | Identical |
EN 60728-11:2017 | Identical |
PN EN 60728-11 : 2017 | Identical |
GOST IEC 60728-11 : 2014 | Identical |
NF EN 60728-11 : 2005 | Identical |
UNE-EN 60728-11:2012 | Identical |
PNE-FprEN 60728-11 | Identical |
UNE-EN 60728-11:2017 | Identical |
BS EN 50529-2:2010 | EMC network standard Wire-line telecommunications networks using coaxial cables |
CEI EN 60728-5 : 2016 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
98/230491 DC : DRAFT MARCH 1998 | IEC 60728-5 - CABLED DISTRIBUTION SYSTEMS FOR TELEVISION AND SOUND SIGNALS - PART 5: HEAD END EQUIPMENT |
S.R. CLC/TR 50173-99-2:2010 | INFORMATION TECHNOLOGY - IMPLEMENTATION OF BCT APPLICATIONS USING CABLING IN ACCORDANCE WITH EN 50173-4 |
BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN 62305-3:2011 | Protection against lightning Physical damage to structures and life hazard |
03/311342 DC : DRAFT JULY 2003 | IEC 60728-10 ED.2.0 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE OF RETURN PATH (TA5) |
S.R. CLC/TS 50083-2-3:2018 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-3: LTE (4G) INTERFERENCE MITIGATION FILTERS |
UNE-EN 60728-3:2012 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
BS EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions |
15/30298002 DC : 0 | BS EN 60728-101 ED 1.0 - CABLE NETWORKS FOR TELEVISION SIGNALS; SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS WITH ALL-DIGITAL CHANNELS LOAD (TA/5) |
CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
PD CLC/TR 50173-99-2:2010 | Information technology. Implementation of BCT applications using cabling in accordance with EN 50173-4 |
I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
14/30280323 DC : 0 | BS EN 60728-5 ED 3.0 - CABLE NETWORKS FOR TELEVISION SIGNALS; SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
06/30150081 DC : DRAFT MAY 2006 | IEC 60728-4 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
BS EN 60728-5:2008 | Cable networks for television signals, sound signals and interactive services Headend equipment |
17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
I.S. EN 60728-6:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
CEI EN 60728-6 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
I.S. EN 60728-3:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS |
EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
CEI EN 62305-3 : 2013 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
IEC 60728-3:2017 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
BIS IS 13252-1 : 2010 AMD 1 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CEI EN 60728-3 : 2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS |
04/30097421 DC : DRAFT APR 2004 | IEC 60950-1 ED.2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services System performance of forward paths |
BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
CEI EN 60728-13 : 2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
I.S. EN 62305-3:2011 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
UNE-EN 62305-3:2011 | Protection against lightning -- Part 3: Physical damages to structures and life hazard |
I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
I.S. EN 50529-2:2010 | EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES |
IEC 60728-3:2017 RLV | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
IEC 60728-101:2016 | Cable networks for television signals, sound signals and interactive services - Part 101: System performance of forward paths loaded with digital channels only |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
CLC/TR 50173-99-2:2010 | Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 |
CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology |
BS EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services Optical equipment |
12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN 60728-10:2014 | Cable networks for television signals, sound signals and interactive services System performance for return paths |
BS EN 60728-3:2011 | Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks |
15/30324828 DC | BS EN 62305-3. Protection against lightning. Part 3. Physical damage to structures and life hazard |
UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
I.S. EN 50173-4:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
CEI CLC/TR 50173-99-2 : 2013 | INFORMATION TECHNOLOGY - IMPLEMENTATION OF BCT APPLICATIONS USING CABLING IN ACCORDANCE WITH EN 50173-4 |
EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
IEC 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
IEC 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
IEC 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
IEC 60728-10:2014 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return paths |
BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CEI EN 50529-2 : 2013 | EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES |
CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
I.S. EN 60728-13:2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
CLC/TS 50083-2-3:2018 | Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters |
BS EN 60728-101:2017 | Cable networks for television signals, sound signals and interactive services System performance of forward paths loaded with digital channels only |
08/30185648 DC : 0 | BS EN 60728-13 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
I.S. EN 60728-10:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS |
I.S. EN IEC 60728-3:2018 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5) |
I.S. EN 60728-14:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
EN IEC 60728-3:2018 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5) |
BS EN 50173-4 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
I.S. EN 60728-5:2016 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT |
I.S. EN 60728-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS |
07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
IEC 60728-5:2015 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
EN 60728-5:2016 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
EN 50529-2:2010 | EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables |
EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
EN 50164-2:2008 | Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes |
IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
IEC 60050-195:1998 | International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
IEC GUIDE 112:2017 | Guide on the safety of multimedia equipment |
R064-004 : 1999 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PROTECTION AGAINST ELECTROMAGNETIC INTERFERENCES (EMI) IN INSTALLATIONS OF BUILDINGS |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
IEC 60728-2:2010 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
EN 50174-3:2013/A1:2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS |
EN 50174-2 : 2009 AMD 2 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
EN 50164-1:2008 | Lightning Protection Components (LPC) - Part 1: Requirements for connection components |
IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
IEC 62305-4:2010 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
IEC 62305-2:2010 | Protection against lightning - Part 2: Risk management |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 60050-851:2008 | International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding |
EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.