IEC 60654-4:1987
Current
Current
The latest, up-to-date edition.
Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, Spanish, Castilian
Published date
15-07-1987
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
PREFACE
Clause
1 Scope
2 Object
3 General
4 Non-solid substances
4.1 Definitions
5 Gases and vapours
5.1 Contamination effects
5.2 Inorganic chlorine compounds
5.3 Explanation of contaminant severity levels
6 Aerosols
7 Liquids
8 Solid substances
8.1 Kind of industrial-process and location within
that process
8.2 Nature of solid substances in the environment
which could affect the instruments
8.3 In combination with
8.4 Frequency of occurrence
8.5 Size
8.6 Concentration in mg/kg or g/kg of dry air
8.7 Velocity in m/s
8.8 Thermal conductivity
8.9 Electrical conductivity
8.10 Magnetic permeability
8.11 Example given to demonstrate the use of the
questionnaire
9 Flora and fauna
APPENDIX A - Industrial contaminants
APPENDIX B - Methods of classification of reactive environments
Considers the corrosive and erosive industrial environment to which land-based and offshore industrial-process measurement and control systems or parts of systems may be exposed during operation, during periods when they are installed but inactive, during storage or transportation. Maintenance and repair conditions are not considered.
| DevelopmentNote |
Also numbered as BS EN 60654-4. (12/2005) Stability Date: 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Standards | Relationship |
| NEN 10654-4 : 1988 | Identical |
| NEN EN IEC 60654-4 : 1997 | Identical |
| I.S. EN 60654-4:1999 | Identical |
| PN EN 60654-4 : 2000 | Identical |
| SN EN 60654-4 : 1997 | Identical |
| BS 5967-4(1988) : 1988 AMD 9957 | Identical |
| CEI EN 60654-4 : 1998 | Identical |
| EN 60654-4:1997 | Identical |
| NF EN 60654-4 : 1997 | Identical |
| DIN IEC 60654-4:1990-12 | Identical |
| DIN EN 60654-4:1998-08 | Identical |
| UNE-EN 60654-4:1999 | Identical |
| I.S. EN IEC 62828-1:2018 | REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| 13/30287730 DC : 0 | BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| UNE-EN 60794-2-41:2011 | Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres |
| 14/30295302 DC : 0 | BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS |
| BS ISO 11844-1 : 2006 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| CEI EN 60794-2-41 : 2009 | OPTICAL FIBRE CABLES - PART 2-41: INDOOR CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX BUFFERED A4 FIBRES |
| 98/262470 DC : DRAFT JUL 1998 | IEC 61987 ED. 1 - TERMS AND STRUCTURES OF MEASURING EQUIPMENT |
| 14/30298027 DC : 0 | BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| GOST R IEC 61850-3 : 2005 | COMMUNICATION NETWORKS AND SYSTEMS IN SUBSTATIONS - PART 3 - GENERAL REQUIREMENTS |
| ISO/IEC 24702:2006 | Information technology Generic cabling Industrial premises |
| EN 60794-2-41 : 2008 | OPTICAL FIBRE CABLES - PART 2-41: INDOOR CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX BUFFERED A4 FIBRES |
| EN 60870-2-2:1996 | Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non-electrical influences) |
| EN 60794-2-10:2011 | Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
| 14/30298051 DC : 0 | BS EN 61069-1 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| 10/30189547 DC : 0 | BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS |
| CEI EN 60794-3-30 : 2010 | OPTICAL FIBRE CABLES - PART 3-30: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OPTICAL TELECOMMUNICATION CABLES FOR LAKES, RIVER CROSSINGS AND COASTAL APPLICATION |
| BS EN ISO 11844-1:2008 | Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres Determination and estimation of indoor corrosivity |
| PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
| NF ISO 11844-2 : 2006 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| UNI EN ISO 11844-2 : 2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| 07/30162401 DC : 0 | BS EN 61207-1 - EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL |
| I.S. EN ISO 11844-2:2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| BS EN 60794-2-10:2011 | Optical fibre cables Indoor optical fibre cables. Family specification for simplex and duplex cables |
| CEI EN 61757-1 : 2013 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| BS PD ISO/IEC TR 29106 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING - INTRODUCTION TO THE MICE ENVIRONMENTAL CLASSIFICATION |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| IEC TS 60079-43:2017 | Explosive atmospheres - Part 43: Equipment in adverse service conditions |
| IEC 61757:2018 | Fibre optic sensors - Generic specification |
| VDI 2073-1 : 2014 COR 1 2014 | HYDRAULIC SYSTEMS IN BUILDING SERVICES - HYDRAULIC CIRCUITS |
| 11/30241337 DC : DRAFT JAN 2011 | BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| 05/30135124 DC : DRAFT JUN 2005 | IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS |
| DIN EN ISO 11844-1:2008-08 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| DIN IEC 60359:1993-09 | EXPRESSION OF THE PERFORMANCE OF ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT |
| UNI EN ISO 11844-1 : 2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| I.S. EN 60143-2:2013 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV)) |
| BS EN 60794-2-42:2008 | Optical fibre cables Indoor optical fibre cables. Product specification for simplex and duplex cables with A4 fibres |
| IEC 61587-1:2016 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| BS ISO 11844-2 : 2005 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| CEI EN 61587-1 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION |
| IEC 62828-1:2017 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters |
| BS EN 60143-2:2013 | Series capacitors for power systems Protective equipment for series capacitor banks |
| CEI EN 60143-2 : 2014 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS |
| I.S. EN ISO 11844-1:2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| NF EN 60870 2-2 : 1997 | TELECONTROL EQUIPMENT AND SYSTEMS - PART 2: OPERATING CONDITIONS - SECTION 2: ENVIRONMENTAL CONDITIONS (CLIMATIC, MECHANICAL AND OTHER NON-ELECTRICAL INFLUENCES) |
| I.S. EN 60794-2-10:2011 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES (IEC 60794-2-10:2011 (EQV)) |
| CEI EN 60794-2-10 : 2012 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES |
| API 551 : 2016 | PROCESS MEASUREMENT |
| I.S. EN 61587-1:2017 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION |
| IEC 60794-2-10:2011 | Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
| ONORM EN ISO 11844-2 : 2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| EN ISO 11844-2:2008 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005) |
| ONORM EN ISO 11844-1 : 2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| EN ISO 11844-1:2008 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2006) |
| CEI EN 60794-2-42 : 2009 | OPTICAL FIBRE CABLES - PART 2-42: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES WITH A4 FIBRES |
| 05/30134095 DC : DRAFT MAY 2005 | IEC 61587-1 ED 2 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND 60297 - PART 1: CLIMATIC, MECHANICAL TESTS AND SAFETY ASPECTS FOR CABINETS, RACKS AND SUBRACKS |
| 01/715982 DC : DRAFT NOV 2001 | ISO/CD 11844-2 - CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| DIN EN ISO 11844-2:2008-08 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| BS PD IEC/TS 62603-1 : 2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| BS EN 60870-2-2:1997 | Telecontrol equipment and systems. Operating conditions Environmental conditions (climatic, mechanical and other non-electrical influences) |
| 99/201444 DC : DRAFT MAR 1999 | IEC 61850-3 - COMMUNICATION NETWORKS AND SYSTEMS IN SUBSTANCES - PART 3: GENERAL REQUIREMENTS |
| EN IEC 62828-1:2018 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters |
| I.S. EN 61069-1:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| ISO/IEC TR 29106:2007 | Information technology Generic cabling Introduction to the MICE environmental classification |
| IEC 60870-2-2:1996 | Telecontrol equipment and systems - Part 2: Operating conditions -Section 2: Environmental conditions (climatic, mechanical and othernon electrical influences) |
| IEC 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
| IEC 60794-2-42:2008 | Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres |
| IEC 60143-2:2012 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| ISO 11844-1:2006 | Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 1: Determination and estimation of indoor corrosivity |
| ISO 11844-2:2005 | Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 2: Determination of corrosion attack in indoor atmospheres |
| IEC 61757-1:2012 | Fibre optic sensors - Part 1: Generic specification |
| EN 61587-1:2017 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 60794-3-30:2008 | Optical fibres Outdoor cables. Family specification for optical telecommunication cables for lakes, river crossings and coastal application |
| I.S. EN 60794-2-42:2008 | OPTICAL FIBRE CABLES - PART 2-42: INDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES WITH A4 FIBRES |
| 11/30245197 DC : 0 | BS EN 60143-2 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENTS FOR SERIES CAPACITOR BANKS |
| 10/30219087 DC : 0 | BS EN 61587-1 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 1: ENVIRONMENTAL REQUIREMENTS AND TESTS, SAFETY ASPECTS FOR FOR CABINETS, RACKS, SUBRACKS AND CHASSIS |
| BS EN ISO 11844-2:2008 | Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres Determination of corrosion attack in indoor atmospheres |
| PD IEC/TS 60079-43:2017 | Explosive atmospheres Equipment in adverse service conditions |
| BS EN 60794-2-41:2008 | Optical fibre cables Indoor cables. Product specification for simplex and duplex buffered A4 fibres |
| IEC 60794-2-30:2008 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
| I.S. EN 60870-2-2:1999 | TELECONTROL EQUIPMENT AND SYSTEMS - PART 2: OPERATING CONDITIONS - SECTION 2: ENVIRONMENTAL CONDITIONS (CLIMATIC, MECHANICAL AND OTHER NON-ELECTRICAL INFLUENCES) |
| IEC TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| EN 61757-1 : 2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
| EN 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
| EN 60794-3-30:2008 | OPTICAL FIBRE CABLES - PART 3-30: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OPTICAL TELECOMMUNICATION CABLES FOR LAKES, RIVER CROSSINGS AND COASTAL APPLICATION |
| EN 60794-2-42:2008 | Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres |
| EN 60143-2:2013 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.