IEC 60549:2013
Current
The latest, up-to-date edition.
High-voltage fuses for the external protection of shunt capacitors
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
23-04-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Performance requirements
5 Type tests
6 Information to be given to the user
7 Application information
Bibliography
IEC 60549:2013 applies to external fuses used with high-voltage capacitors according to IEC 60871-1, Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General. IEC 60871-1 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems, and also to capacitors intended for use in power filter circuits. Fuses according to IEC 60549:2013 are intended to clear either faults inside a capacitor unit to permit continued operation of the remaining parts of the bank in which the unit is connected (unit fuses) or faults on the whole capacitor bank to isolate the bank from the system (line fuses). This second edition cancels and replaces the first edition published in 1976. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- alignment of the document with current IEC document structure requirements;
- clarification of certain test requirements. Keywords: external fuses used with high-voltage capacitors, shunt capacitors for a.c.power system
| Committee |
TC 32/SC 32A
|
| DevelopmentNote |
Stability date: 2020. (04/2013)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60549 : 2013 | Identical |
| NEN EN IEC 60549 : 2013 | Identical |
| PN EN 60549 : 2014 | Identical |
| VDE 0670-404 : 2014 | Identical |
| DIN EN 60549 : 2014 | Identical |
| BS EN 60549:2013 | Identical |
| CEI EN 60549 : 2014 | Identical |
| EN 60549:2013 | Identical |
| SN EN 60549:2013 | Identical |
| UNE-EN 60549:2013 | Identical |
| PNE-FprEN 60549 | Identical |
| PD IEC/TR 62001:2009 | High-voltage direct current (HVDC) systems. Guidebook to the specification and design evaluation of A.C. filters |
| 17/30356218 DC : 0 | BS EN 60282-1 - HIGH-VOLTAGE FUSES - PART 1: CURRENT-LIMITING FUSES |
| BS EN 60143-3:2015 | Series capacitors for power systems Internal fuses |
| PD IEC/TS 60871-3:2015 | Shunt capacitors for AC power systems having a rated voltage above 1 000 V Protection of shunt capacitors and shunt capacitor banks |
| BS EN 60871-1:2014 | Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V General |
| UNE-EN 60282-1:2011 | High-voltage fuses - Part 1: Current-limiting fuses |
| IEC TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
| CEI EN 60282-1 : 2011 | HIGH-VOLTAGE FUSES - PART 1: CURRENT-LIMITING FUSES |
| NF EN 60282-1 : 2010 AMD 1 2014 | HIGH-VOLTAGE FUSES - PART 1: CURRENT-LIMITING FUSES |
| IEC TS 60871-3:2015 | Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks |
| IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
| IEC 60143-1:2015 | Series capacitors for power systems - Part 1: General |
| EN 61642:1997 | Industrial a.c. networks affected by harmonics - Application of filters and shunt capacitors |
| EN 60143-1:2015/AC:2017-05 | Series capacitors for power systems - Part 1: General |
| 01/203455 DC : DRAFT MAY 2001 | IEC 60143-1 ED.4.0 - SERIES CAPACITORS FOR POWER SYSTEMS |
| BS EN 60143-2:2013 | Series capacitors for power systems Protective equipment for series capacitor banks |
| EN 60143 : 93 AC 94 | SERIES CAPACITORS FOR POWER SYSTEMS - GENERAL PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION |
| BS 7264-1:1990 | Shunt capacitors for a.c. power systems having a rated voltage above 1000 V Specification for performance, testing and use |
| 12/30263682 DC : 0 | BS EN 60871-1 - SHUNT CAPACITORS FOR AC POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL |
| BS EN 61642:1998 | Industrial a.c. networks affected by harmonics. Application of filters and shunt capacitors |
| IEC TR 62001:2009 | High-voltage direct current (HVDC) systems - Guidebook to the specification and design evaluation of A.C. filters |
| I.S. EN 60282-1:2009 | HIGH-VOLTAGE FUSES - PART 1: CURRENT-LIMITING FUSES |
| VDE 0560-430 : 1998 | INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS |
| DIN EN 61642 : 1998 | INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS |
| 14/30310457 DC : 0 | BS EN 60143-1 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 1: GENERAL |
| DD IEC/PAS 62001:2004 | Guide to the specification and design evaluation of a.c. filters for HVDC systems |
| CEI EN 60143-2 : 2014 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS |
| CEI EN 60871-1 : 2015 | SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL |
| IEC PAS 62001:2004 | Guide to the specification and design evaluation of a.c. filters for HVDC systems |
| IEC 60282-2:2008 | High-voltage fuses - Part 2: Expulsion fuses |
| EN 60282-1:2009/A1:2014 | HIGH-VOLTAGE FUSES - PART 1: CURRENT-LIMITING FUSES (IEC 60282-1:2009) |
| PD IEC/TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
| BS EN 60282-1 : 2009 | HIGH-VOLTAGE FUSES - PART 1: CURRENT-LIMITING FUSES |
| I.S. EN 60143-2:2013 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV)) |
| 14/30300750 DC : 0 | BS EN 60143-3 ED 2.0 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 3: INTERNAL FUSES |
| I.S. EN 61642:1999 | INDUSTRIAL A.C. NETWORKS AFFECTED BY HARMONICS - APPLICATION OF FILTERS AND SHUNT CAPACITORS |
| IEC TR 62001-4:2016 | High-voltage direct current (HVDC) systems - Guidance to the specification and design evaluation of AC filters - Part 4: Equipment |
| IEC 60871-1:2014 | Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General |
| IEC 60282-1:2009+AMD1:2014 CSV | High-voltage fuses - Part 1: Current-limiting fuses |
| IEC 60143-2:2012 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| I.S. EN 60871-1:2014 | SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL |
| IEEE C37.43-2008 | IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors |
| CEI 32-14 : 1998 | HIGH-VOLTAGE FUSES - PART 2: EXPULSION FUSES |
| BS EN 60143-1:2015 | Series capacitors for power systems General |
| 11/30245197 DC : 0 | BS EN 60143-2 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENTS FOR SERIES CAPACITOR BANKS |
| BS EN 60143 : 1993 AMD 8725 | SERIES CAPACITORS FOR POWER SYSTEMS |
| PD IEC/TR 62001-4:2016 | High-voltage direct current (HVDC) systems. Guidance to the specification and design evaluation of AC filters Equipment |
| I.S. EN 60143-1:2015 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 1: GENERAL |
| I.S. EN 60143-3:2015 | SERIES CAPACITORS FOR POWER SYSTEMS - PART 3: INTERNAL FUSES |
| IEEE C37.41-2008 REDLINE | IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices |
| IEC 60143-3:2015 | Series capacitors for power systems - Part 3: Internal fuses |
| EN 60143-3:2015 | Series capacitors for power systems - Part 3: Internal fuses |
| EN 60143-2:2013 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| EN 60871-1:2014 | Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General |
| CSA C60871.1 : 2014 | SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 60282-1:2009+AMD1:2014 CSV | High-voltage fuses - Part 1: Current-limiting fuses |
| IEC 60871-1:2014 | Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General |
| IEC 60050-436:1990 | International Electrotechnical Vocabulary (IEV) - Part 436: Power capacitors |
| IEC 60282-2:2008 | High-voltage fuses - Part 2: Expulsion fuses |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.