Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60534-1:2005

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Industrial-process control valves - Part 1: Control valve terminology and general considerations

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

06-01-2005

Superseded date

23-05-2023

$150.77
Including GST where applicable

applies to all types of industrial-process control valves (hereinafter referred to as control valves). This part establishes a partial basic terminology list and provides guidance on the use of all other parts of IEC 60534

Committee
TC 65/SC 65B
DevelopmentNote
Stability Date: 2017. (09/2017)
DocumentType
Standard
Pages
25
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

BS EN 61987-23:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of actuators for electronic data exchange
BS EN 61514-2:2013 Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
CEI EN 60534-8-4 : 2016 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW
I.S. EN 61987-23:2016 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 23: LISTS OF PROPERTIES (LOPS) OF ACTUATORS FOR ELECTRONIC DATA EXCHANGE
I.S. EN 60534-2-4:2009 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY
NF EN 60534 8-2 : 2012 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES
BS 5793-4:1987 Industrial-process control valves Specification for inspection and routine testing
06/30157192 DC : 0 BS EN 736-3 - VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS
BS EN 60534-2-1:2011 Industrial-process control valves Flow capacity. Sizing equations for fluid flow under installed conditions
BS EN 60534-3-2:2001 Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves
14/30295852 DC : 0 BS EN 60534-2-3 ED. 3.0 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY - TEST PROCEDURES
CEI EN 60534-9 : 2009 INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS
BS EN 60534-8-4:2015 Industrial-process control valves Noise considerations. Prediction of noise generated by hydrodynamic flow
13/30287720 DC : 0 BS EN 61987-21 ED 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES
CEI EN 60534-7 : 2012 INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET
I.S. EN 61987-24-2:2017 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOPS) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE
I.S. EN 60534-8-2:2011 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011 (EQV))
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 736-3:2008 Valves - Terminology - Part 3: Definition of terms
DIN EN ISO 23553-1:2014-09 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
IEC 60534-8-3:2010 Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
BS ISO 6358-3:2014 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Method for calculating steady-state flow-rate characteristics of systems
DIN EN 736-3:2008-04 Valves - Terminology - Part 3: Definition of terms
EN 60534-3-1:2000/corrigendum:2000 INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES
EN 60534-2-5:2003 Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
EN 61987-23:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange
EN 60534-8-3:2011 Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method
EN 1349:2009 Industrial process control valves
EN 61987-21:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
EN 61514-2:2013 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
BS EN 1349:2009 Industrial process control valves
BS 5793-5:1984 Industrial-process control valves Specification for marking
BS EN 60534-2-4:2009 Industrial-process control valves Flow capacity. Inherent flow characteristics and rangeability
13/30282237 DC : 0 BS EN 60534-8-4 ED 3.0 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW
PREN 14382 : DRAFT 2016 GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
BS EN 60534-7:2010 Industrial-process control valves Control valve data sheet
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 61987-24-3:2017 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) of flow modification accessories for electronic data exchange
04/30117386 DC : DRAFT JUL 2004 EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
04/30110315 DC : DRAFT MAR 2004 IEC 60534-9 - INDUSTRIAL PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS
BS EN 60534-2-3:2016 Industrial-process control valves Flow capacity. Test procedures
I.S. EN 61987-22:2016 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 22: LISTS OF PROPERTIES (LOPS) OF VALVE BODY ASSEMBLIES FOR ELECTRONIC DATA EXCHANGE
UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
CEI EN 60534-2-5 : 2004 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY
CEI EN 60534-8-2 : 2012 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES
IEC 60534-8-1:2005 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
IEC 60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
I.S. EN 60534-9:2007 INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS
BS EN 60534-8-3:2011 Industrial-process control valves Noise considerations. Control valve aerodynamic noise prediction method
BS EN 60534-8-2:2011 Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves
I.S. EN 61987-24-3:2017 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LISTS OF PROPERTIES (LOPS) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE
I.S. EN 60534-2-1:2011-2015-10 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS
IEC 61987-24-2:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 736-3:2008 VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS
I.S. EN 1349:2009 INDUSTRIAL PROCESS CONTROL VALVES
UNI EN 1349 : 2010 INDUSTRIAL PROCESS CONTROL VALVES
VDI/VDE 2178:2009-07 Fluidic characteristic quantities of quarter turn valves and their determination
I.S. EN 88-2:2007 PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR
VDI/VDE 3844:2014-01 Industrial process control valves - Actuators for control valves
VDI/VDE 2176:2007-09 Fluidic characteristic quantities of vanes and their determination
VDI 2073 Blatt 2:2012-05 Hydraulic systems in building services - Hydraulic balancing
BS 5793-2.2(1981) : AMD 7817 INDUSTRIAL PROCESS CONTROL VALVES - FLOW CAPACITY - SIZING EQUATIONS FOR COMPRESSIBLE FLUID FLOW UNDER INSTALLED CONDITIONS
CEI EN 60534-8-3 : 2012 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-3: NOISE CONSIDERATIONS - CONTROL VALVE AERODYNAMIC NOISE PREDICTION METHOD
BS EN 61987-24-2:2017 Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of properties (LOPs) of valve/actuator accessories for electronic data exchange
BS EN 61987-21:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of Properties (LOP) of automated valves for electronic data exchange. Generic structures
DIN EN 60534-2-4:2009-11 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY
BS 5793-2.3(1984) : 1984 AMD 7818 INDUSTRIAL PROCESS CONTROL VALVES - FLOW CAPACITY - METHODS OF TEST
BS EN 60534-8-1:2005 Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves
I.S. EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV))
03/314999 DC : DRAFT SEP 2003 IEC 60534-4 - INDUSTRIAL PROCESS CONTROL VALVES - PART 4: INSPECTION AND ROUTINE TESTING
I.S. EN 60534-8-1:2005 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
I.S. EN ISO 23553-1:2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
EN 61987-24-3:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
BS EN 60534-5:2004 Industrial-process control valves Marking
NF EN 60534 8-1 : 2006 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
CEI EN 60534-2-4 : 2010 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY
CEI EN 60534-8-1 : 2006 VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 60534-3-1:2000 INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNE-EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
IEC 61514-2:2013 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
IEC 60534-2-4:2009 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
IEC 60534-9:2007 Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
UNI EN 736-3 : 2008 VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN ISO 23553-1 : 2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
DIN IEC 60534-2-4:1990-11 INDUSTRIAL-PROCESS CONTROL VALVES; FLOW CAPACITY; INHERENT FLOW CHARACTERISTICS AND RANGEABILITY
BS EN 61987-22:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
BS EN 60534-3-3:1998 Industrial-process control valves Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
96/201627 DC : DRAFT FEB 1996 IEC 60534-4:1982 - INDUSTRIAL PROCESS CONTROL VALVES - PART 4: INSPECTION AND ROUTINE TESTING
BS EN 60534-2-5:2003 Industrial-process control valves. Flow capacity Sizing equations for fluid flow through multistage control valves with interstage recovery
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
07/30174895 DC : DRAFT DEC 2007 BS EN 60534-7 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVE - PART 7: CONTROL VALVE DATA SHEET
15/30323275 DC : 0 BS EN 61987-24-3 ED 1.0 - MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LIST OF PROPERTIES (LOP) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE
NF EN 60534-7 : 2012 INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET
09/30201712 DC : 0 BS EN 60534-7 - INDUSTRIAL-PROCESS CONTROL VALVE - PART 7: CONTROL VALVE DATA SHEET
08/30179182 DC : DRAFT MAY 2008 BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES
NF EN 60534-2-4 : 2009 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY
I.S. EN 61987-21:2016 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES
I.S. EN 60534-7:2010 INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET
I.S. EN 60534-5:2004 INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING
CEI EN 60534-5 : 2005 INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING
EN 61987-24-2:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
16/30334290 DC : 0 BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
IEC 61987-24-3:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
IEC 60534-8-4:2015 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
IEC 60534-8-2:2011 Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
DIN EN 88-2:2008-03 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
IEC 61987-22:2015 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
IEC 60534-7:2010 Industrial-process control valves - Part 7: Control valve data sheet
IEC 60534-3-1:2000 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves
12/30250105 DC : 0 BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012)
IEC 61987-21:2015 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
IEC 60534-2-5:2003 Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
ISO 6358-3:2014 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 3: Method for calculating steady-state flow-rate characteristics of systems
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
DIN EN 60534-2-1:2012-01 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:2011); German version EN 60534-2-1:2011
03/321016 DC : DRAFT DEC 2003 IEC 60534-8-1 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES
I.S. EN 60534-8-4:2015 INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW
06/30155498 DC : DRAFT AUG 2006 ISO 4126-10 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 10: SIZING OF SAFETY VALVES AND CONNECTED INLET AND OUTLET LINES FOR GAS/LIQUID TWO-PHASE FLOW
CEI EN 60534-3-1 : 2001 INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES
02/203205 DC : DRAFT FEB 2002 IEC 61514-2. ED.1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS
15/30323271 DC : 0 BS EN 61987-24-2 ED 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOP) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE
BS EN 60534-2-2:1993 Industrial-process control valves. Flow capacity Sizing equations for compressible fluid flow under installed conditions
BS EN 60534-9:2007 Industrial-process control valves Test procedure for response measurements from step inputs
09/30201330 DC : 0 BS EN 60534-8-3 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-3: NOISE CONSIDERATIONS CONTROL VALVE AERODYNAMIC NOISE PREDICTION METHOD
BS 5793-8.1:1986 Industrial-process control valves. Noise considerations Method for laboratory measurement of noise generated by aerodynamic flow through control valves
03/300069 DC : DRAFT JAN 2003 IEC 60534-8-4 ED.2 - INDUSTRIAL PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW
I.S. EN 60534-2-3:2016 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES
I.S. EN 60534-2-5:2003 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY
BS EN 60534-3-1:2000, IEC 60534-3-1:2000 INDUSTRIAL-PROCESS CONTROL VALVES - DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES
EN 60534-2-1:2011/AC:2015 INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011)
IEC 60534-2-3:2015 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
BS EN 736-3:2008 Valves. Terminology Definition of terms
IEC 60534-2-1:2011 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
IEC 60534-5:2004 Industrial-process control valves - Part 5: Marking
IEC 60534-3-3:1998 Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
IEC 61987-23:2015 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange
EN 61987-22:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange
EN 60534-9:2007 Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
EN 60534-8-1:2005 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
EN 60534-2-3:2016 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
EN 60534-2-4:2009 Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability
EN 60534-8-4:2015 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
EN 60534-5:2004 Industrial-process control valves - Part 5: Marking
EN 60534-3-3:1998 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
EN 60534-7:2010 Industrial-process control valves - Part 7: Control valve data sheet
EN 60534-3-2:2001 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
EN 60534-8-2:2011 Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves

ISO 6708:1995 Pipework components — Definition and selection of DN (nominal size)
EN 61333:1998 Marking on U and E ferrite cores

Access your standards online with a subscription

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

$150.77
Including GST where applicable