IEC 60521:1988
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Class 0.5, 1 and 2 alternating-current watthour meters
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-01-2003
English - French, Spanish, Castilian
15-03-1988
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
PREFACE
Explanatory foreword in relation to Class 0.5 meters
Clause
1 Scope
2 Units
3 Definitions
4 Classification
5 Mechanical requirements
6 Electrical requirements
7 Marking of meters
8 Accuracy
9 Starting and running with no-load
10 Adjustment
APPENDIX A - Graphical symbols for watthour meters
TABLES
Applies only to newly manufactured induction type watt-hour meters of accuracy classes 0.5, 1 and 2, for the measurement of alternating current electrical active energy of a frequency in the range 45 Hz to 65 Hz and to their type tests only.This publication supersedes IEC 60043 (1960), 60170 (1964) and 60280 (1968).
| Committee |
TC 13
|
| DevelopmentNote |
Supersedes IEC 60043, IEC 60170, IEC 60280 (02/2001)
|
| DocumentType |
Standard
|
| Pages |
77
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 60521 : 1995 | Identical |
| HD 309.1 : 200S1 | Similar to |
| NEN 10521 : 1995 | Identical |
| I.S. EN 60521:1995 | Identical |
| SAC GB/T 15283 : 1994 | Identical |
| SN EN 60521 : 1995 | Identical |
| VDE 0418-12 : 1995 | Identical |
| UNE 21310-2:1990 | Identical |
| BS EN 60521:1995 | Identical |
| CEI 13-13 : 1982 COR 1982 | Identical |
| CEI 13-17 : 1987 COR 1995 | Identical |
| CEI EN 60521 : 2ED 1997 | Identical |
| EN 60521:1995/corrigendum Dec. 1997 | Identical |
| DIN EN 60521 : 1995 | Identical |
| UNE-EN 60521:1996 | Identical |
| BS 7400(1991) : 1991 AMD 7672 | SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| BS EN 60687:1993 | Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
| BS EN 61036:1997 | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| 03/311404 DC : 0 | IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| AAMI ID26:2004 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| AAMI ID26 : 2004 : R2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| IEC 60687:1992 | Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
| EN 60687:1992/corrigendum:1993 | ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S) |
| EN 62053-31:1998 | Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) |
| BS 5724-2.124(1998) : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| CEI 13-32 : 2000 | WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS |
| DIN EN 60687 : 1994 | ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S) |
| VDE 0418-3-31 : 1999 | ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY) |
| DIN EN 62053-31 : 1999 | ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY) |
| BS EN 62053-31:1999 | Electricity metering equipment (a.c.). Particular requirements Pulse output devices for electromechanical and electronic meters (two wires only) |
| CEI EN 62053-31 : 1999 | ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY) |
| AAMI ID26 : 2004 : R2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| I.S. EN 61036:1997 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| CEI 13-26 : 1999 | WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA |
| IEC 62053-31:1998 | Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) |
| BS 5685-1:1979 | Electricity meters Specification for Class 0.5, 1 and 2 single-phase and polyphase, single rate and multi-rate watt-hour meters |
| CSA C22.2 No. 1010.1 : 0 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.