IEC 60505:2011
Current
Current
The latest, up-to-date edition.
Evaluation and qualification of electrical insulation systems
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
11-07-2011
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Ageing
5 Basic evaluation considerations
6 Functional ageing tests
Annex A (informative) - Glossary
Bibliography
IEC 60505:2011 establishes the basis for estimating the ageing of electrical insulation systems (EIS) under conditions of either electrical, thermal, mechanical, environmental stresses or combinations of these (multifactor stresses). It specifies the principles and procedures that shall be followed, during the development of EIS functional test and evaluation procedures, to establish the estimated service life for a specific EIS. This standard should be used by all IEC technical committees responsible for equipment having an EIS. The contents of the corrigendum of March 2017 have been included in this copy.
| Committee |
TC 112
|
| DevelopmentNote |
Supersedes IEC 60610. (01/2003) Supersedes IEC 60791, IEC 60792-1, IEC TR 60941, IEC 61356 and IEC 61359. (10/2004) Stability Date: 2020. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
152
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60505 : 2011 | Identical |
| NBN EN 60505 : 2011 | Identical |
| NEN EN IEC 60505 : 2011 C1 2017 | Identical |
| I.S. EN 60505:2011 | Identical |
| PN EN 60505 : 2011 AC 2017 | Identical |
| SAC GB/T 20112 : 2015 | Identical |
| DIN EN 60505 : 2012 COR 1 2017 | Identical |
| VDE 0302-1 : 2012 COR 1 2017 | Identical |
| BS EN 60505:2011 | Identical |
| CEI EN 60505 : 2012 | Identical |
| EN 60505:2011/AC:2017-03 | Identical |
| UNE-EN 60505:2011 | Identical |
| NFC 26 207 : 1985 | Identical |
| SN EN 60505 : 2000 | Identical |
| UNE-EN 60505:2005 | Identical |
| PNE-EN 60505 | Identical |
| UNE 21403:1992 | Identical |
| UTEC 26 207 : 1985 | Identical |
| 02/209876 DC : DRAFT NOV 2002 | IEC 62332 TS ED.1 - ELECTRICAL INSULATION SYSTEMS (EIS) - THERMAL EVALUATION OF COMBINED LIQUID AND SOLID COMPONENTS |
| CLC/TR 60919-2:2010 | PERFORMANCE OF HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS WITH LINE-COMMUTATED CONVERTERS - PART 2: FAULTS AND SWITCHING |
| CEI EN 60076-14 : 2014 | POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| DIN IEC 60085 : 1993 | THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION |
| 08/30177750 DC : DRAFT FEB 2008 | BS EN 61857-1 - ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE |
| I.S. EN 62068:2013 | ELECTRICAL INSULATING MATERIALS AND SYSTEMS - GENERAL METHOD OF EVALUATION OF ELECTRICAL ENDURANCE UNDER REPETITIVE VOLTAGE IMPULSES (IEC 62068:2013 (EQV)) |
| 12/30263868 DC : 0 | BS EN 60076-14 - POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| I.S. EN 60085:2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| BS EN 60034-18-1:2010 | Rotating electrical machines Functional evaluation of insulation systems. General guidelines |
| 04/30124993 DC : DRAFT NOV 2004 | IEC 61244-3 - LONG-TERM RADIATION AGEING IN POLYMERS - PART 3: PROCEDURES FOR IN-SERVICE MONITORING OF LOW-VOLTAGE CABLE MATERIALS |
| NF EN 61857-21 : 2009 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 21: SPECIFIC REQUIREMENTS FOR GENERAL-PURPOSE MODELS - WIRE-WOUND APPLICATIONS |
| IEC TS 62332-2:2014 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test |
| BS EN 60310:2016 | Railway applications. Traction transformers and inductors on board rolling stock |
| CEI EN 60034-18-21 : 2014 | ROTATING ELECTRICAL MACHINES - PART 18-21: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR WIRE-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION |
| CEI EN 61857-1 : 2010 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE |
| I.S. EN 60034-18-31:2012 | ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES (IEC 60034-18-31:2012 (EQV)) |
| I.S. EN 61858:2008 | ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED WIRE-WOUND EIS |
| BS PD IEC TR 60919-2 : 2008 | PERFORMANCE OF HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS WITH LINE-COMMUTATED CONVERTERS - PART 2: FAULTS AND SWITCHING |
| I.S. EN 61857-21:2009 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 21: SPECIFIC REQUIREMENTS FOR GENERAL-PURPOSE MODELS - WIRE-WOUND APPLICATIONS |
| I.S. EN 60137:2017 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| BS EN 62114:2001 | Electrical insulation systems (EIS). Thermal classification |
| I.S. EN 60034-18-21:2013 | ROTATING ELECTRICAL MACHINES - - PART 18-21: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR WIREWOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION (IEC 60034-18-21:2012 (EQV)) |
| I.S. EN 60071-5:2015 | INSULATION CO-ORDINATION - PART 5: PROCEDURES FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS |
| I.S. EN 60076-14:2013 | POWER TRANSFORMERS - PART 14: LIQUIDIMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS (IEC 60076-14:2013 (EQV)) |
| IEC TS 60034-18-33:2010 | Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses |
| EN 60137:2017 | Insulated bushings for alternating voltages above 1 000 V |
| EN 60071-5:2015 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
| EN 61858-2:2014 | Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS |
| EN 60034-18-31 : 2012 | ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES (IEC 60034-18-31:2012) |
| EN 60034-18-1:2010 | Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines |
| 04/30111589 DC : 0 | |
| 03/307567 DC : DRAFT JUNE 2003 | IEC 61858 ED.2.0 - ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED WIRE-WOUND EIS |
| EN 60071-2:1997 | Insulation co-ordination - Part 2: Application guide |
| BS EN 62631-1:2011 | Dielectric and resistive properties of solid insulating materials General |
| BS EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV General requirements |
| BS EN 60034-18-21:2013 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for wire-wound windings. Thermal evaluation and classification |
| CEI EN 62631-1 : 2012 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| BS EN 60076-14:2013 | Power transformers Liquid-immersed power transformers using high-temperature insulation materials |
| 12/30273912 DC : 0 | BS EN 61858-2 - ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED EIS - PART-2: FORM-WOUND EIS |
| BS EN 62068-1:2003 | Electrical insulation systems. Electrical stresses produced by repetitive impulses General method of evaluation of electrical endurance |
| BS EN 60085:2008 | Electrical insulation. Thermal evaluation and designation |
| DD CLC/TS 60034-18-33:2011 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Multifactor evaluation by endurance under simultaneous thermal and electrical stresses |
| CLC/TS 60034-18-33:2011 | Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses |
| UNE-EN 60076-14:2014 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| 09/30204161 DC : DRAFT MAY 2009 | BS EN 62631-1 - GUIDELINES FOR THE DETERMINATION OF DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL CONSIDERATIONS |
| BS EN 61857-1:2009 | Electrical insulation systems. Procedures for thermal evaluation General requirements. Low-voltage |
| CEI EN 61857-21 : 2012 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 21: SPECIFIC REQUIREMENTS FOR GENERAL-PURPOSE MODELS - WIRE-WOUND APPLICATIONS |
| IEC TR 62392:2006 | Suitability of typical electrical insulating material (EIM) for polymer recycling |
| BIS IS/IEC 60071-2 : 1996(R2017) | INSULATION CO-ORDINATION - PART 2: APPLICATION GUIDE |
| IEC 61857-21:2009 | Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications |
| EN IEC 62631-2-1:2018 | Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical frequencies (0,1 Hz to 10 MHz) - AC Methods |
| BS EN 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| CEI EN 60034-18-1 : 2011 | ROTATING ELECTRICAL MACHINES - PART 18-1: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - GENERAL GUIDELINES |
| BS EN 61857-21:2009 | Electrical insulation systems. Procedures for thermal evaluation Specific requirements for general-purpose models. Wire-wound applications |
| I.S. EN 60310:2016 | RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK |
| I.S. EN 61858-2:2014 | ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED ELECTRICAL INSULATION SYSTEM (EIS) - PART 2: FORM-WOUND EIS |
| IEC TS 62332-1:2011 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements |
| IEEE DRAFT 434 : D10 2006 | FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE |
| IEC 62114:2001 | Electrical Insulation Systems - Thermal classification |
| I.S. EN 61857-1:2009 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE |
| I.S. EN 60077-1:2017 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| IEC TS 62332-3:2016 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors |
| IEC TS 60076-14:2009 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
| IEC 60137:2017 RLV | Insulated bushings for alternating voltages above 1000 V |
| IEC 60071-2:2018 RLV | Insulation co-ordination - Part 2: Application guidelines |
| BS 5691-1:1995 | Guide for the determination of thermal endurance properties of electrical insulating materials General guidelines for ageing procedures and evaluation of test results |
| 06/30146693 DC : DRAFT FEB 2006 | |
| CEI EN 62068 : 2014 | ELECTRICAL INSULATING MATERIALS AND SYSTEMS - GENERAL METHOD OF EVALUATION OF ELECTRICAL ENDURANCE UNDER REPETITIVE VOLTAGE IMPULSES |
| 08/30176387 DC : DRAFT JAN 2008 | BS EN 60034-18-21 - ROTATING ELECTRICAL MACHINES - PART 18-21: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR WIRE-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| NF EN 61858 : 2009 | ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED WIRE-WOUND EIS |
| EN 62114:2001 | Electrical insulation systems (EIS) - Thermal classification |
| BS EN 61857-31:2017 | Electrical insulation systems. Procedures for thermal evaluation Applications with a designed life of 5 000 h or less |
| 12/30273916 DC : 0 | BS EN 61858-1 - ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED EIS - PART-1: WIRE-WOUND WINDING EIS |
| BS EN 62068:2013 | Electrical insulating materials and systems. General method of evaluation of electrical endurance under repetitive voltage impulses |
| BS EN 60034-18-31:2012 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and classification of insulation systems used in rotating machines |
| 08/30177151 DC : DRAFT JAN 2008 | BS EN 61858 - ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED WIRE-WOUND EIS |
| NF EN 60085 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| UNE-EN 60137:2011 | Insulated bushings for alternating voltages above 1 000 V |
| CEI EN 61857-31 : 1ED 2017 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 31: APPLICATIONS WITH A DESIGNED LIFE OF 5000 H OR LESS |
| BS EN 61858-1:2014 | Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS) Wire-wound winding EIS |
| DD IEC/TS 62332-1:2011 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components General requirements |
| I.S. EN 50588-1:2017 | MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| 14/30271248 DC : 0 | BS EN 60310 ED 4.0 - RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK |
| BS EN 61858:2008 | Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS |
| 03/306455 DC : DRAFT APR 2003 | IEC 61857-1 ED.2.0 - ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE |
| 11/30252173 DC : 0 | BS EN 60071-5 - INSULATION CO-ORDINATION - PART 5: PROCEDURES FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) CONVERTER STATIONS |
| UNE-EN 60071-5:2015 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| EN IEC 60071-2:2018 | Insulation co-ordination - Part 2: Application guidelines |
| IEC TR 61857-2:2015 | Electrical insulation systems - Procedures for thermal evaluation - Part 2: Selection of the appropriate test method for evaluation and classification of electrical insulation systems |
| CEI EN 60085 : 2009 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements |
| I.S. EN IEC 60071-2:2018 | INSULATION CO-ORDINATION - PART 2: APPLICATION GUIDELINES |
| I.S. EN IEC 62631-2-1:2018 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0,1 HZ TO 10 MHZ) - AC METHODS |
| CEI EN 60034-18-31 : 2013 | ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES |
| IEC 62068-1:2003 | Electrical insulation systems - Electrical stresses produced by repetitive impulses - Part 1: General method of evaluation of electrical endurance |
| IEC TS 60071-5:2002 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| IEC 62631-2-1:2018 | Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods |
| DIN VDE 0302-4 : 1988 | INSULATION SYSTEMS OF ELECTRICAL EQUIPMENT; ELECTRICAL ENDURANCE; GENERAL CONSIDERATIONS, EVALUATION PROCEDURES |
| 08/30177754 DC : DRAFT FEB 2008 | BS EN 61857-21 - ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 21: SPECIFIC REQUIREMENTS FOR GENERAL PURPOSE MODELS - WIRE-WOUND APPLICATIONS |
| BS EN 60071-5:2015 | Insulation co-ordination Procedures for high-voltage direct current (HVDC) converter stations |
| PD IEC/TS 62332-3:2016 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Hermetic motor-compressors |
| 12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| DIN VDE 0302-5 : 1988 | INSULATION SYSTEMS OF ELECTRICAL EQUIPMENT; PERFORMANCE EVALUATION |
| 05/30125041 DC : DRAFT JAN 2005 | ISO 19973-1 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 1: GENERAL PRODUCTION CALCULATION METHOD |
| S.R. CLC/TR 60919-2:2010 | PERFORMANCE OF HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS WITH LINE-COMMUTATED CONVERTERS - PART 2: FAULTS AND SWITCHING |
| PD IEC/TR 61857-2:2015 | Electrical insulation systems. Procedures for thermal evaluation Selection of the appropriate test method for evaluation and classification of electrical insulation systems |
| BS EN 61858-2:2014 | Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS) Form-wound EIS |
| DIN VDE 0302-7 : 1989 | INSULATION SYSTEMS OF ELECTRICAL EQUIPMENT; MECHANICAL ENDURANCE FUNCTIONAL TESTS FOR ELECTRICAL INSULATION SYSTEMS |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| PD IEC/TS 62332-2:2014 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test |
| 16/30318517 DC : 0 | BS EN 60137 ED. 7.0 - INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| I.S. EN 61857-31:2017 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 31: APPLICATIONS WITH A DESIGNED LIFE OF 5000 H OR LESS |
| DIN EN 60071-2 : 1997 | INSULATION CO-ORDINATION - PART 2: APPLICATION GUIDE |
| I.S. EN 62068-1:2003 | ELECTRICAL INSULATION SYSTEMS - ELECTRICAL STRESSES PRODUCED BY REPETITIVE IMPULSES - PART 1: GENERAL METHOD OF EVALUATION OF ELECTRICAL ENDURANCE |
| I.S. EN 61858-1:2014 | ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED ELECTRICAL INSULATION SYSTEM (EIS) - PART 1: WIRE-WOUND WINDING EIS |
| S.R. CLC/TS 60034-18-33:2011 | ROTATING ELECTRICAL MACHINES - PART 18-33: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - MULTIFACTOR EVALUATION BY ENDURANCE UNDER SIMULTANEOUS THERMAL AND ELECTRICAL STRESSES |
| NF EN 62114 : 2002 | ELECTRICAL INSULATION SYSTEMS (EIS) - THERMAL CLASSIFICATION |
| UNE-EN 60034-18-31:2013 | Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines |
| I.S. EN 60034-18-1:2010 | ROTATING ELECTRICAL MACHINES - PART 18-1: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - GENERAL GUIDELINES |
| IEC TS 61244-3:2005 | Long-term radiation ageing in polymers - Part 3: Procedures for in-service monitoring of low-voltage cable materials |
| 16/30296081 DC : 0 | BS EN 60077-1 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| IEC 62068:2013 | Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses |
| IEC 61857-1:2008 | Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage |
| IEC 62631-1:2011 | Dielectric and resistive properties of solid insulating materials - Part 1: General |
| IEC 61857-31:2017 | Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or less |
| IEC 61858-1:2014 | Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS |
| IEC 61858-2:2014 | Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2: Form-wound EIS |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60034-18-21:2012 | Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification |
| IEC 60034-18-31:2012 | Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
| BS EN 60077-1:2017 | Railway applications. Electric equipment for rolling stock General service conditions and general rules |
| IEC 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| DD IEC TS 60076-14 : DRAFT 2009 | POWER TRANSFORMERS - PART 14: DESIGN AND APPLICATION OF LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| BS 7816-3:1998 | Determination of long-term radiation ageing in polymers Procedures for in-service monitoring of low-voltage cable materials |
| 11/30258048 DC : 0 | BS EN 62068 - ELECTRICAL INSULATING MATERIALS AND SYSTEMS - GENERAL METHOD OF EVALUATION OF ELECTRICAL ENDURANCE UNDER REPETITIVE VOLTAGE IMPULSES |
| 08/30176383 DC : DRAFT JAN 2008 | BS EN 60034-18-1 - ROTATING ELECTRICAL MACHINES - PART 18-1: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - GENERAL GUIDELINES |
| 15/30323694 DC : 0 | BS EN 62631-2-1 - DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 2-1: RELATIVE PERMITTIVITY AND DISSIPATION FACTOR - TECHNICAL FREQUENCIES (0.1 HZ - 10 MHZ), AC METHODS |
| CEI CLC/TR 60919-2 : 2013 | PERFORMANCE OF HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS WITH LINE-COMMUTATED CONVERTERS - PART 2: FAULTS AND SWITCHING |
| NF EN 60034 18-1 : 2010 | ROTATING ELECTRICAL MACHINES - PART 18-1: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - GENERAL GUIDELINES |
| BS IEC 61858-2 : 2014 | ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED ELECTRICAL INSULATION SYSTEM (EIS) - PART 2: FORM-WOUND EIS |
| IEC TR 60919-2:2008+AMD1:2015 CSV | Performance of high-voltage direct current (HVDC) systems withline-commutated converters - Part 2: Faults and switching |
| DIN VDE 0302-6 : 1988 | INSULATION SYSTEMS OF ELECTRICAL EQUIPMENT; MULTI-FACTOR FUNCTIONAL TESTING; TEST PROCEDURES |
| IEC 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| 16/30333476 DC : 0 | BS EN 61857-31 - ELECTRICAL INSULATION SYSTEMS-PROCEDURES FOR THERMAL EVALUATION - PART 31: APPLICATIONS WITH A DESIGNED LIFE LESS THAN 5000 HOURS |
| 09/30194359 DC : 0 | BS EN 60034-18-34 - ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
| VDE 0111-2 : 1997 | INSULATION CO-ORDINATION - PART 2: APPLICATION GUIDE |
| CEI EN 60071-2 : 1998 | INSULATION CO-ORDINATION - PART 2: APPLICATION GUIDE |
| UNE-EN 62631-1:2012 | Dielectric and resistive properties of solid insulating materials - Part 1: General |
| IEEE 1434-2014 | IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery |
| IEEE 99-2007 REDLINE | IEEE Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment |
| IEC 60071-2:2018 | Insulation co-ordination - Part 2: Application guidelines |
| CEI EN 60137 : 2009 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| I.S. EN 62631-1:2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| NF EN 61857-1 : 2009 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE |
| BS EN 60071-2:1997 | Insulation co-ordination Application guide |
| IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| IEC 60071-5:2014 | Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations |
| IEC 61858:2008 | Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS |
| 03/314451 DC : DRAFT SEP 2003 | IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING |
| IEC 60034-18-1:2010 | Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines |
| EN 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 61858-1:2014 | Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS |
| EN 62068-1:2003 | Electrical insulation systems - Electrical stresses produced by repetitive impulses - Part 1: General method of evaluation of electrical endurance |
| EN 61857-21:2009 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 21: SPECIFIC REQUIREMENTS FOR GENERAL-PURPOSE MODELS - WIRE-WOUND APPLICATIONS |
| IEC 60077-1:2017 RLV | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 62068:2013 | Electrical insulating materials and systems - General method of evaluation of electrical endurance under repetitive voltage impulses |
| EN 61857-31:2017 | Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or less |
| EN 61858:2008 | ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED WIRE-WOUND EIS |
| EN 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| EN 60034-18-21:2013 | Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification |
| EN 61857-1:2009 | Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage |
| EN 62631-1 : 2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL (IEC 62631-1:2011) |
| EN 60310:2016/AC:2018-03 | RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK (IEC 60310:2016/COR1:2018) |
| CSA C71.2 : 1998 | INSULATION COORDINATION - PART 2: APPLICATION GUIDE |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 60811-3-1:1985 | Common test methods for insulating and sheathing materials ofelectric cables - Part 3: Methods specific to PVC compounds -Section One: Pressure test at high temperature - Tests forresistance to cracking |
| IEC 60212:2010 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60371-2:2004 | Specification for insulating materials based on mica - Part 2: Methods of test |
| IEC TS 61251:2008 | Electrical insulating materials - A.C. voltage endurance evaluation - Introduction |
| IEC 60050-212:2010 | International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
| ISO 1663:2007 | Rigid cellular plastics — Determination of water vapour transmission properties |
| ISO/TR 7620:2005 | Rubber materials — Chemical resistance |
| IEC 60493-1:2011 | Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results |
| ISO 9352:2012 | Plastics — Determination of resistance to wear by abrasive wheels |
| IEC 60216-2:2005 | Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria |
| IEEE 400.2-2013 REDLINE | IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) |
| ISO 877-1:2009 | Plastics — Methods of exposure to solar radiation — Part 1: General guidance |
| IEC 60243-3:2013 | Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests |
| IEC 60544-1:2013 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| ASTM D 1044 : 2013 : REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ISO 4611:2010 | Plastics Determination of the effects of exposure to damp heat, water spray and salt mist |
| IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 877-2:2009 | Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass |
| ASTM D 1868 : 2013 : REDLINE | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
| IEC 62231:2006 | Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria |
| IEC 60243-2:2013 | Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage |
| IEC 60587:2007 | Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60216-5:2008 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 62539:2007 | Guide for the statistical analysis of electrical insulation breakdown data |
| IEC 61033:1991 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| IEC 61710:2013 | Power law model - Goodness-of-fit tests and estimation methods |
| IEC 60216-3:2006 | Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics |
| IEC TR 62039:2007 | Selection guide for polymeric materials for outdoor use under HV stress |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.