Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60332-1:1993

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

15-07-2004

Language(s)

English - French

Published date

26-04-1993

$48.99
Including GST where applicable

FOREWORD
1 Scope
2 Normative reference
3 Sample
4 Conditioning
5 Test apparatus
6 Arrangement of test piece
7 Ignition source
8 Test procedure
  8.1 Flame application
  8.2 Flame application time
  8.3 Evaluation of test results
9 Performance requirements
Annex A (informative) Bibliography

Specifies a method of test on a single vertical insulated wire or cable under fire conditions and the requirement for compliance.Has the status of a group safety publication in accordance with IEC Guide 104.

Committee
TC 20
DevelopmentNote
BS DRAFT FOR COMMENT 92/28716 DC
DocumentType
Standard
Pages
16
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
CEI 20-35 : 1ED 1998 Identical
SAC GB/T 18380-1 : 2001 Identical
GOST R IEC 332-1 : 1996 Identical
HD 405.1 : S1 AMD 1 Similar to
NEN 10332-1 : 1993 Identical

98/262057 DC : 0 IEC 60092-374 - ELECTRICAL INSTALLATIONS IN SHIPS - SHIPBOARD TELECOMMUNICATIONS CABLES AND RADIO-FREQUENCY CABLES - PART 374: TELEPHONE CABLES FOR NON-ESSENTIAL COMMUNICATION SERVICES
BS EN 61196-3:1999 Radio-frequency cables. Specifications Sectional specification for coaxial cables for local area networks
07/30164222 DC : 0 BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES
NFC 32 201-3 : 1998 AMD 2 2009 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON-SHEATHED CABLES FOR FIXED WIRING
03/305957 DC : DRAFT MAY 2003 EN 60332-1-1 ED. 1 - TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS
BS EN 50033:1991 Specification for construction and testing of miners\' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
02/208613 DC : DRAFT AUG 2002 IEC 60966-2-1 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES
BS EN 62013-1:2006 Caplights for use in mines susceptible to firedamp General requirements. Construction and testing in relation to the risk of explosion
CSA ISO/IEC 15018 : 2005 : R2010 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
CSA ISO/IEC 15018:2005 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
S.R. HD 60364-4-42:2011 LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS
CEI EN 50033 : 1998 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP
ISO/IEC 18010:2002 Information technology Pathways and spaces for customer premises cabling
NF EN 50090-5-2 : 2004 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR
16/30321116 DC : 0 BS EN 60364-7-711 ED 2.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-711 - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
EN 187103:2003 Family specification - Optical fibre cables for indoor applications
EN 62013-1:2006 Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
HD 60364-4-42 : 2011 AMD 1 2015 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014)
HD 384.7.711 : 200S1 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
EN 60966-1:1999 Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
DEFSTAN 07-247(PT1)/2(2006) : 2006 THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS
DEFSTAN 07-247(PT1)/3(2009) : 2009 THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS
04/30126718 DC : DRAFT DEC 2004 IEC 60189-1 ED.3 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 1: GENERAL TEST AND MEASURING METHODS
03/313426 DC : DRAFT NOV 2003 IEC 62013-1 - CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
03/309751 DC : DRAFT JUNE 2003 IEC 60695-9-1 - FIRE HAZARD TESTING - PART 9: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE
IEC 60227-4:1992+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
I.S. EN 62012-1:2002 MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION
I.S. EN 50090-5-2:2004 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR
RSSB GK/GN0602 : ISSUE 1 GUIDANCE ON TRAIN ROOFTOP ANTENNA POSITIONING
I.S. 202:1989 RUBBER INSULATED CABLE AND FLEXIBLE CORDS OF RATED VOLTAGE UP TO AND INCLUDING 450/750 V
NF EN 60794-1-1 : 2002 OPTICAL FIBER CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
IEC PAS 60794-2-50:2004 Optical fibre cables - Part 2-50: Indoor optical fibre cables - Family specification for simplex and duplex cables for use in patch cords
IEEE 45-7 : 2012 RECOMMENDED PRACTICE FOR ELECTRICAL INSTALLATIONS ON SHIPBOARD - AC SWITCHBOARDS
EN 50090-5-2:2004 Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair
I.S. EN 1889-2:2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
VDE 0471-1-3 : 1987 FIRE HAZARD TESTING - GUIDANCE FOR THE PREPARATION OF REQUIREMENTS AND TEST SPECIFICATIONS FOR ASSESSING FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PART 1-3: GUIDANCE FOR USE OF PRESELECTION PROCEDURES
VDE 0129-507 : 2001 ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: PLEASURE CRAFT (IEC 60092-507:2000)
02/208645 DC : DRAFT AUG 2002 IEC 60966-3 ED.2 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES
BS EN 50090-5-2:2004 Home and building electronic systems (HBES) Media and media dependent layers - Network based on HBES Class 1, Twisted Pair
NFC 93 581-02 : 92 XP SECTIONAL SPECIFICATION FOR FLEXIBLE RADIOFREQUENCY AND COAXIAL CABLE ASSEMBLIES - LEVEL 2
NF EN 187103 : 2003 FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS
05/30131385 DC : DRAFT MAR 2005 IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION
NFC 32 201-2 : 98 AMD 1 2003 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2: TEST METHODS
IEC 60227-6:2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
I.S. HD 384.7.711:2003 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
IEC 60227-3:1993+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
ISO/IEC 15018:2004 Information technology Generic cabling for homes
IEC 62255-1:2003 Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification
IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
UNE-EN 60695-9-2:2014 Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods
CSA E60079.14 : 2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL INSTALLATIONS IN EXPLOSIVE GAS ATMOSPHERES (OTHER THAN MINES)
UNI EN 1889-2 : 2009 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
NFC 32 102-8 : 99 AMD 2 2004 RUBBER INSULATED CABLES OR RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 8: POLYCHLOROPRENE OR EQUIVALENT SYNTHETIC ELASTOMER SHEATHED CABLE FOR DECORATIVE CHAINS
CEI EN 60966-1 : 2001 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS
CEI EN 62012-1 : 2003 MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION
07/30168572 DC : 0 BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 60245-1:2003+AMD1:2007 CSV Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
CSA ISO/IEC 18010 :2004 INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING
I.S. EN 50033:1992 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP
CEI EN 50090-5-2 : 2005 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR
ISO/TR 10840:1993 Plastics Burning behaviour Guidance for development and use of fire tests
I.S. HD 60364-7-740:2006 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
09/30214292 DC : 0 BS EN 60079-35-1 - CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
IEC 62013-1:2005 Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
BS EN 1889-2 : 2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
IEC 62012-1:2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
98/705686 DC : DRAFT MAR 1998 PREN 13135-1 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
08/30195018 DC : DRAFT DEC 2008 BS EN 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
BS IEC TS 60695-9.2 : 2001 FIRE HAZARD TESTING - PART 9-2 - SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
07/30153021 DC : 0 BS IEC 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
BS EN 187103:2003 Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications
PD ISO/TR 37152:2016 Smart community infrastructures. Common framework for development and operation
BIS IS/IEC 60794-1-1 : 2001 OPTICAL FIBRE CABLES - PART 1: GENERIC SPECIFICATION - SECTION 1: GENERAL
CEI EN 187103 : 2003 FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS
BS EN 60966-1:1999 Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods
03/308375 DC : DRAFT JUNE 2003 IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS
I.S. EN 62013-1:2006 CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
13/30291609 DC : 0 BS EN 60966-1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND TEST METHODS
IEC 60502:1994 Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
03/318201 DC : DRAFT NOV 2003 IEC 60502-2, ED.2 - POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES FROM 1 KV (UM = 1,2 KV) UP TO 30 KV (UM = 36 KV) - PART 2: CABLES FOR RATED VOLTAGES FROM 6 KV (UM = 7,2 KV) UP TO 30 KV (UM = 36 KV)
05/30133337 DC : DRAFT MAY 2005 IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK
BS EN 62012-1:2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification
03/311404 DC : 0 IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA ISO/IEC 18010 : 2004 : INC : AMD 1 : 2006 : R2012 INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING
CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R2015 INFORMATION TECHNOLOGY - GENERIC CABLING FOR HOMES
I.S. EN 187103:2003 FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS
S.R. HD 60364-7-740:2006 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
IEC 60364-7-740:2000 Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
IEC 60502-1:2004+AMD1:2009 CSV Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
IEC TR 60695-11-30:2001 Fire hazard testing - Part 11-30: Test flames - History and development from 1979 to 1999
I.S. EN 61196-3:1999 RADIO FREQUENCY CABLES - PART 3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR LOCAL AREA NETWORKS
PD 60079-14:2000 Guide to application of BS EN 60079-14
DIN EN 1889-2:2009-07 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
02/203840 DC : DRAFT MAY 2002 IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 61196-3:1998 Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks
04/30111706 DC : DRAFT MAR 2004 IEC 60695-9-2 ED.2 - FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS
EN 50033 : 1991 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP
HD 60364-7-740:2006/A11:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
EN 62012-1:2002 Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification
EN 61196-3:1998 Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks
CEI EN IEC 61936-1:2024 Power installations exceeding 1 kV AC and 1,5 kV DC Part 1: AC

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.