IEC 60326-3:1991
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Printed boards - Part 3: Design and use of printed boards
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
31-12-2021
Language(s)
English - French
Published date
07-05-1991
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
Clause
1 Scope
2 Normative references
3 Materials and surface finishes
3.1 Materials
3.2 Metallic surface finishes
3.3 Non-metallic surface finishes
4 Assembly
5 Dimensions
5.1 Datum reference
5.2 Outline dimensions of printed boards
5.3 Board thickness
5.4 Dimensions of holes
5.5 Dimensions of slots and notches
5.6 Dimensions of conductors
5.7 Dimensional stability
6 Electrical characteristics
6.1 Resistance
6.2 Current-carrying capacity
6.3 Insulation resistance
6.4 Voltage proof
6.5 Other electrical characteristics
7 Mechanical characteristics
7.1 Adhesion of the conductive pattern
7.2 Flatness
8 Miscellaneous
8.1 Soldering
8.2 Delamination
8.3 Flammability
9 Packaging of printed boards
9.1 General
9.2 Packaging materials
9.3 Procedures
Figures
Annex A - Determination of size of access window
in permanent protective coating
Applicable to printed boards, irrespective of their method of manufacture, when they are ready for the mounting of the components. It is divided into separate parts covering information for the designer, recommendations for the specification writer, test methods and requirements for the various types of printed boards. Contains fundamental information on the design and the application of printed boards, their technical limitations and the features and characteristics which can normally be obtained and expected. It is intended to be used for guidance to the designer and the user of printed boards.
| Committee |
TC 91
|
| DevelopmentNote |
Also numbered as BS 6221-3(1991) (09/2005)
|
| DocumentType |
Standard
|
| Pages |
109
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DIN IEC 60326-3:1993-09 | Identical |
| PN T-80152 : 1994 | Identical |
| NEN 10326-3 : 1985 | Identical |
| CEI 52-21 : 1998 | Identical |
| DIN 41612-7:1985-06 | TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; DIMENSIONS OF TYPES U AND V |
| BS EN 60603-2:1998 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| NF EN 61076 4 100 : 2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES |
| BS CECC23400-800(1991) : 1991 AMD 7368 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITHOUT THROUGH-CONNECTIONS |
| I.S. CECC 75301-802:1995 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| DIN 41612-8:1987-10 | TWO-PART CONNECTORS FOR PRINTED BOARDS, GRID 2,54 MM; DIMENSIONS OF TYPE M |
| DIN 41612-2:1987-10 | TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D |
| DIN 41612-9:1987-10 | TWO-PART CONNECTORS FOR PRINTED BOARDS; GRIP 2,54 MM; DIMENSIONS OF TYPE E |
| BS EN 123200:1992 | Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plated through holes |
| BS 123800:2001 | System of quality assessment. Sectional specification. Flexible multilayer printed boards with through-connections |
| BS 123100:2001 | System of quality assessment. Sectional specification. Rigid single-sided and double-sided printed boards with plain holes |
| 03/100395 DC : DRAFT APR 2003 | EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| 02/202649 DC : DRAFT JAN 2002 | IEC PAS 61076-3-111. ED.1 - CONNECTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-111: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS, FOR INDUSTRIAL ENVIRONMENTS FOR FREQUENCIES UP TO 250 MHZ |
| DIN 41612-6:1990-06 | TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S |
| I.S. EN 61076-4-111:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| CEI EN 61076-4-111 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| I.S. EN 123100:1994 | SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES |
| IEC 61076-4-111:2002 | Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| EN 123600:1996 | Sectional Specification: Flex-rigid multilayer printed boards with through connections |
| EN 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| EN 60127-4:2005/A2:2013 | Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types |
| EN 61076-4-102:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| EN 123300 : 1992 AMD 1 1995 | SECTIONAL SPECIFICATION: MULTILAYER PRINTED BOARDS |
| EN 61076-4-113:2003 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| BS EN 61076-4-111:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS EN 61076-4-102:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| BS CECC 23300-800(1990) : AMD 7366 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION; MULTILAYER PRINTED BOARDS |
| BS CECC23100-800(1990) : AMD 7360 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES |
| DIN 41612-3:1987-10 | TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES F AND G |
| BS CECC23300(1989) : 1989 AMD 7364 | SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: MULTILAYER PRINTED BOARDS |
| BS EN 61076-4-113:2003 | Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| I.S. EN 60603-2:1998 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| I.S. EN 123300:1994 | SECTIONAL SPECIFICATION: MULTILAYER PRINTED BOARDS |
| BS EN 60127-4 : 2005 | MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES |
| I.S. EN 123500:1994 | SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS |
| NF EN 61076 4 113 : 2005 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
| BS 123400:2001 | System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards without through-connections |
| 14/30312344 DC : 0 | PD IEC/PAS 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| CEI EN 61076-4-100 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES |
| BS EN 123500:1992 | Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections |
| 96/205775 DC : 0 | BS CECC 210003 - TECHNOLOGY APPROVAL SCHEDULE FOR PRINTED BOARDS |
| BS 123600:2001 | System of quality assessment. Sectional specification. Flex-rigid multilayer printed boards with through-connections |
| BS EN 123100:1992 | Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plain holes |
| CEI EN 61076-4-108 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| I.S. EN 61076-4-113:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
| CECC 75301-802 : 1994 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| 16/30338234 DC : 0 | BS EN 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| IEC 60326-9:1991 | Printed boards - Part 9: Specification for flexible multilayer printed boards with through connections |
| BS CECC23100(1989) : 1989 AMD 7358 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES |
| 98/230855 DC : DRAFT APRIL 1998 | IEC 61076-4-112 - CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C, LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 112 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,00 MM, WITH SQUARE MALE CONTACTS OF 0,50 X 0,50 MM |
| I.S. EN 61076-4-102:1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
| CECC 75101-807 : 1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION) |
| IEC 60326-12:1992 | Printed boards - Part 12: Specification for mass lamination panels (semi-manufactured multilayer printed boards) |
| I.S. CECC 75101-807:1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION) |
| EN 175101-809:2004/corrigendum Jun. 2005 | DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| IEC 61076-4-113:2002 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| IEC 60127-4:2005+AMD1:2008+AMD2:2012 CSV | Miniature fuses - Part 4: Universal modular fuse-links (UMF) -Through-hole and surface mount types |
| BS 6221-2:1991 | Printed wiring boards Methods of test |
| BS 123500:2001 | System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards with through-connections |
| BS 123700:2001 | System of quality assessment. Sectional specification. Flex-rigid double-sided printed boards with through-connections |
| NF EN 61076 4 102 : 1998 | CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
| BS 123200:2001 | System of quality assessment. Sectional specification. Rigid double-sided printed boards with plated-through holes |
| DIN IEC 60326-4:1993-09 | PRINTED BOARDS - PART 4: SPECIFICATION FOR SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES |
| BS PD ISO/IEC PAS 60127-8 : 2014 | MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION |
| BS CECC23500(1990) : 1990 AMD 7369 | SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS |
| BS CECC23200(1989) : 1989 AMD 7361 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED THROUGH HOLES |
| BS EN 123400:1992 | Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections |
| BS CECC23400(1990) : 1990 AMD 7367 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITHOUT THROUGH CONNECTIONS |
| BS CECC23500-800(1991) : 1991 AMD 7370 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH-CONNECTIONS |
| BS EN 61076-4-108:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS CECC23200-800(1990) : AMD 7363 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES |
| BS EN 123300:1992 | Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards |
| IEC 60326-10:1991 | Printed boards - Part 10: Specification for flex-rigid double-sided printed boards with through connections |
| IEC 60326-11:1991 | Printed boards - Part 11: Specification for flex-rigid multilayer printed boards with through connections |
| IEC PAS 61076-3-111:2002 | Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz |
| IEC 61076-4-100:2001 | Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| IEC 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| IEC 61076-4-102:1997 | Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917 |
| DIN 41612-4:1987-10 | TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPE H |
| BS 123300:2001 | System of quality assessment. Sectional specification. Rigid multilayer printed boards |
| BS EN 175101-802:2000 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| CEI EN 61076-4-102 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
| BS EN 175101-809:2004 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
| BS EN 61076-4-100:2002 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| I.S. EN 60127-4:2005 | MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES (IEC 60127-4:2005 (EQV)) |
| I.S. EN 123200:1994 | SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES |
| I.S. EN 61076-4-108:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| I.S. EN 175101-809:2004 | DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
| IEC 60603-2:1995 | Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| EN 61076-4-100:2001 | Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| EN 60603-2:1998/A1:2005 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| EN 175101-802:1999 | Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| EN 61076-4-111:2002 | Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| EN 123500:1992/A2:1995 | SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS |
| EN 123100 : 1992 AMD 1 1995 | SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES |
| EN 123200:1992/A1:1995 | SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES |
| EN 123700:1996 | Sectional Specification: Flex-rigid double sided printed board with through connections |
| EN 123800:1996 | Sectional Specification: Flexible multilayer printed boards with through connections |
| IEC 60695-1-1:1999 | Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| IEC 60249-2-1:1985 | Base materials for printed circuits. Part 2: Specifications. Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality |
| IEC 60097:1991 | Grid systems for printed circuits |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.