IEC 60068-2-5:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
31-12-2021
Superseded by
Published date
27-04-2010
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.IEC 60068-2-5:2010 provides guidance for testing equipment or components under solar radiation conditions. The purpose of testing is to investigate to what extent the equipment or components are affected by solar radiation. This second edition cancels and replaces the first edition of IEC 60068-2-5, published in 1975, and IEC 60068-2-9, published in 1975, and constitute a technical revision. The main changes with respect to the previous edition are listed below: This second edition of IEC 60068-2-5 will make the reading much easier, partly because it includes guidance for solar radiation testing, previously published in a separate publication, IEC 60068-2-9, and partly because it now allows the use of all lamps specified in CIE 85 and published in 1985 by the International commission on Illumination. The contents of the corrigendum of December 2010 have been included in this copy.
| DevelopmentNote |
Supersedes IEC 60068-2-9. (04/2010) Stability Date: 2020. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN IEC 60068-2-5 : 2011 | Identical |
| PN EN 60068-2-5 : 2011 | Identical |
| VDE 0468-2-5 : 2011 | Identical |
| CEI EN 60068-2-5 : 2012 | Identical |
| I.S. EN 60068-2-5:2011 | Identical |
| NEN 10068-2-5 : 1977 | Identical |
| DIN EN 60068-2-5 : 2011 | Identical |
| UNE-EN 60068-2-5:2011 | Identical |
| DIN IEC 60068-2-5:1982-11 | Corresponds |
| OVE/ONORM EN 60068-2-5 : 2011 | Identical |
| NFC 20 705 : 1987 | Identical |
| SAC GB/T 2423.24 : 1995 | Identical |
| BS EN 60068-2-5:2011 | Identical |
| BS 2011-2.1Sa:1977 | Identical |
| NF EN 60068 2-5 : 2011 | Identical |
| CEI 50-5/1 : 1ED 1999 | Identical |
| BS EN IEC 60068-2-52:2018 | Identical |
| EN 60068-2-5:2011 | Identical |
| SN EN 60068-2-5 : 1999 | Identical |
| EN IEC 60068-2-5:2018 | Identical |
| UNE 20501-2-5:1978 | Identical |
| 15/30323442 DC : 0 | BS EN 62679-4-2 ED 1.0 - ELECTRONIC PAPER DISPLAYS - PART 4-2: ENVIRONMENTAL TEST METHOD |
| 11/30257154 DC : 0 | BS EN 62395-1 - ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 1: GENERAL AND TESTING REQUIREMENTS |
| BS 7400(1991) : 1991 AMD 7672 | SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| BS EN 61747-5:1998 | Liquid crystal and solid-state display devices Environmental, endurance and mechanical test methods |
| BS 8431:2010 | Electrical static meters for secondary metering and sub-metering. Specification |
| 14/30266573 DC : 0 | BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| CEI EN 62341-5 : 2011 | ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS |
| EN 50556:2011 | Road traffic signal systems |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| BS EN 62040-5-3:2017 | Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements |
| PD CEN ISO/TS 14907-1:2015 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| BS EN 61036:1997 | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| PREN 12368 : DRAFT 2014 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| PD IEC TR 60721-4-6:2002 | Ship environmentClassification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 |
| 01/200684 DC : DRAFT FEB 2001 | |
| BS EN 12966:2014 | Road vertical signs. Variable message traffic signs |
| 17/30352083 DC : DRAFT JUL 2017 | BS EN 62244 - RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION PORTAL MONITORS (RPMS) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE AND NUCLEAR MATERIALS |
| 14/30298027 DC : 0 | BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE |
| DD CEN ISO/TS 14907-1:2010 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| 10/30218875 DC : 0 | BS EN 50130-5:2010 - ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| BS EN 61300-2-30:1997 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Solar radiation |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50512 : 2014 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| 02/106353 DC : DRAFT OCT 2002 | EN 12966-1 - VERTICAL ROAD TRAFFIC SIGNS - PART 1: VARIABLE MESSAGE SIGNS |
| UNE-IEC/TS 61827:2011 | Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports |
| I.S. EN 181000:1994 | FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION) |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| I.S. EN 50289-4-17:2015 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 60945:2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| CSA C22.2 No. 61980-1 : 2016 | ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50512:2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| ISO/IEC 24702:2006 | Information technology Generic cabling Industrial premises |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| DIN EN 12368:2015-09 | Traffic control equipment - Signal heads |
| BS EN 12966-1 : 2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| IEC 61747-5:1998 | Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods |
| IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| EN 196000 : 92 AMD 1 2001 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: ELECTROMECHANICAL SWITCHES |
| EN 50130-5:2011 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| EN 12368:2015 | Traffic control equipment - Signal heads |
| EN 61747-5:1998 | Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods |
| EN 62341-5:2009 | Organic Light Emitting Diode (OLED) displays - Part 5: Environmental testing methods |
| EN 62040-5-3:2017 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| EN 62395-1:2013 | Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 50289-4-17:2015 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| EN 12966-1:2005+A1:2009 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| HD 638 S1:2001/A1:2006 | ROAD TRAFFIC SIGNAL SYSTEMS |
| EN 181000:1994 | Generic Specification: Fibre optic branching devices |
| EN 180000:1995 | Generic specification: Fibre optic attenuators |
| NF EN 62341-5 : 2010 | ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS |
| NF EN 50483-6 : 2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| PD IEC/TR 60721-4-4:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at non-weatherprotected locations |
| 14/30299825 DC : 0 | BS EN 50289-4-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| BS EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories Environmental testing |
| BS EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results |
| 08/30195238 DC : 0 | |
| IEC TS 62257-3:2015 | Recommendations for renewable energy and hybrid systems for rural electrification - Part 3: Project development and management |
| PD IEC TR 60721-4-7:2001 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Portable and non-stationary use |
| BS EN 62341-5:2009 | Organic light emitting diode (OLED) displays Environmental testing methods |
| PD IEC/TR 60721-4-2:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation |
| ISO 7240-11:2011 | Fire detection and alarm systems Part 11: Manual call points |
| PD IEC/TR 60721-4-3:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations |
| 13/30275356 DC : 0 | BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| 07/30164554 DC : 0 | BS EN 62341-5 - ORGANIC LIGHT EMITTING DIODE DISPLAYS - PART 5: ENVIRONMENTAL TEST METHODS |
| PD IEC/TR 60721-4-1:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Storage |
| CEI EN 50249 : 2003 | ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY |
| CEI EN 61851-22 : 2003 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION |
| BS EN 181000:1995 | Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices |
| 00/200618 DC : DRAFT JAN 2000 | IEC 61827 ED.1 - ELECTRICAL INSTALLATION AND BEACONING OF AERODROMES - CHARACTERISTICS OF INSET AND ELEVATED LUMINAIRES USED ON AERODROMES |
| I.S. EN 12966:2014 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| CEI EN 61757-1 : 2013 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| CEI EN 60945 : 2003 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 62341-5:2009 | ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS - PART 5: ENVIRONMENTAL TESTING METHODS |
| IEC TR 60721-4-5:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations |
| BS ISO 15003:2006 | Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions |
| I.S. EN 62040-5-3:2017 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN 16704-2-1:2016 | RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGIES - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS) |
| NF EN 50512 : 2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| BS PD ISO/IEC TR 29106 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING - INTRODUCTION TO THE MICE ENVIRONMENTAL CLASSIFICATION |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| I.S. EN 61747-5:1999 | LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS |
| IEC 60056:1987 | High-voltage alternating-current circuit-breakers |
| S.R. CLC/TS 50457-1:2008 | CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: D.C. CHARGING STATION |
| IEC 61757:2018 | Fibre optic sensors - Generic specification |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 12368:2015 | Traffic control equipment. Signal heads |
| 14/30311240 DC : 0 | BS EN 61010-1 ED 3 AMD 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12368:2015 | TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS |
| BS 5311:1996 | High-voltage alternating-current circuit-breakers |
| UNE-EN 50556:2011 | Road traffic signal systems |
| 11/30241337 DC : DRAFT JAN 2011 | BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| 03/318812 DC : DRAFT NOV 2003 | IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT |
| 10/30217405 DC : 0 | BS EN 50556 - ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 50249:2002 | Electromagnetic locators for buried pipes and cables. Performance and safety |
| BS EN 50512:2009 | Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS) |
| UNE-EN 50512:2011 | Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
| DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| EN 196110 : 2002 | SECTIONAL SPECIFICATION - ROTARY SWITCHES - CAPABILITY APPROVAL |
| BS EN 50289-4-17:2015 | Communication cables. Specifications for test methods Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| ISO 15003:2006 | Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions |
| 08/30181001 DC : DRAFT APR 2008 | BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS) |
| 10/30218017 DC : 0 | BS ISO 7240-11 - FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS |
| MIL-PRF-24758 Revision A:2004 | CONDUIT SYSTEMS, FLEXIBLE, WEATHERPROOF |
| 13/30279156 DC : 0 | BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| BS EN 61851-22:2002 | Electric vehicle conductive charging system A.C. electric vehicle charging station |
| DD IEC TS 62257-3 : DRAFT 2004 | RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT |
| BS ISO 18185-3:2006 | Freight containers. Electronic seals Environmental characteristics |
| PD IEC/TS 62257-3:2015 | Recommendations for renewable energy and hybrid systems for rural electrification Project development and management |
| BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
| BS EN 62395-1:2013 | Electrical resistance trace heating systems for industrial and commercial applications General and testing requirements |
| PREN 12966 : DRAFT 2013 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| 15/30313931 DC : 0 | BS ISO 9022-9 - OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 9: SOLAR RADIATION AND WEATHERING |
| NF EN 62052-11 : 2003 AMD 1 2017 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
| IEC 62599-1:2010 | Alarm systems - Part 1: Environmental test methods |
| I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| PREN 50289-4-17 : DRAFT 2014 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| PREN 50411-4-1 : DRAFT 2017 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| I.S. EN 50483-6:2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| CLC/TS 50457-1:2008 | Conductive charging for electric vehicles - Part 1: D.C. charging station |
| IEC TR 60721-4-6:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment |
| CEI EN 61300-2-30 : 1997 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-30: TESTS - SOLAR RADIATION |
| IEC 62679-4-2:2016 | Electronic paper displays - Part 4-2: Environmental test methods |
| IEC TR 60721-4-4:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations |
| I.S. EN 61036:1997 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| NF EN 50556 : 2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| IEC TR 60721-4-1:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage |
| IEC TR 60721-4-2:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation |
| IEC TS 61827:2004 | Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports |
| IEC 62341-5:2009 | Organic light emitting diode (OLED) displays - Part 5: Environmental testing methods |
| UNE-EN 12966-1:2006 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| 03/309760 DC : DRAFT JUNE 2003 | IEC 62257-3 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT |
| 01/205932 DC : DRAFT AUG 2001 | BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING |
| NF EN 50249 : 2003 | ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| PD IEC/TR 60721-4-0:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Introduction |
| 14/30282284 DC : 0 | BS ISO 18185-3 - FREIGHT CONTAINERS - ELECTRONIC SEALS - PART 3: ENVIRONMENTAL CHARACTERISTICS |
| 17/30347868 DC : 0 | BS EN 50411-4-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A |
| PD IEC TR 60721-4-5:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Ground vehicle installations |
| 11/30252977 DC : 0 | BS EN 61747-10-2 - LIQUID CRYSTAL DISPLAY DEVICES - PART 10-2: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - ENVIRONMENTAL AND ENDURANCE |
| BS EN 196000:1993 | Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches |
| IEC 61851-22:2001 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| DIN EN 61268 : 1996 | ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3) |
| BS EN 60068-2-9:2000 | Environmental testing. Test methods Tests. Guidance for solar radiation testing |
| BS IEC 62679-4-2:2016 | Electronic paper displays Environmental test methods |
| CEI EN 62395-1 : 2014 | ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 1: GENERAL AND TESTING REQUIREMENTS |
| BS ISO 9022-9:2016 | Optics and photonics. Environmental test methods Solar radiation and weathering |
| CEI UNI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: - PRODUCT STANDARD |
| PREN 50130-5 : DRAFT 2010 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| BS EN 50130-5:2011 | Alarm systems Environmental test methods |
| BS EN 180000:1996 | Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators |
| DD CLC/TS 50457-1:2008 | Conductive charging for electric vehicles D.C. charging station |
| PD 6521:1988 | Summaries of test methods for environmental testing of electrotechnical products |
| NF EN 60068 2-9 : 2000 | ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE FOR SOLAR RADIATION TESTING |
| BS EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| BS EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| 03/316517 DC : DRAFT OCT 2003 | |
| ISO 9022-9:2016 | Optics and photonics Environmental test methods Part 9: Solar radiation and weathering |
| I.S. EN 50130-5:2011 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| UNI CEI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| CEI EN 50470-1 : 2007 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| ISO 18185-3:2015 | Freight containers Electronic seals Part 3: Environmental characteristics |
| NFC 70 238 : 2001 AMD 1 2006 | ROAD TRAFFIC SIGNAL SYSTEMS |
| I.S. EN 61010-2-012:2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| I.S. EN 196110:2002 | SECTIONAL SPECIFICATION: ROTARY SWITCHES - CAPABILITY APPROVAL |
| S.R. CEN ISO/TS 14907-1:2015 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| BIS IS/ISO 7240-11 : 2011 | FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS |
| DIN EN 12966:2015-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| UNE-EN 12966:2015 | Road vertical signs - Variable message traffic signs |
| CEI EN 50556 : 2012 | ROAD TRAFFIC SIGNAL SYSTEMS |
| I.S. EN 62395-1:2013 | ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 1: GENERAL AND TESTING REQUIREMENTS |
| IEC TR 60721-4-7:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use |
| IEC 61747-10-2:2014 | Liquid crystal display devices - Part 10-2: Environmental, endurance and mechanical test methods - Environmental and endurance |
| ISO/IEC TR 29106:2007 | Information technology Generic cabling Introduction to the MICE environmental classification |
| IEC TR 60721-4-3:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations |
| IEC TR 60721-4-0:2002 | Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction |
| 12/30266531 DC : 0 | BS EN TS 62257-1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 1: GENERAL INTRODUCTION TO RURAL ELECTRIFICATION |
| IEC 62052-11:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment |
| IEC 61300-2-30:1995 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-30: Tests - Solar radiation |
| EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| 00/246907 DC : DRAFT DEC 2000 | BS EN 61980-1 - ELECTRICAL - ELECTRIC VEHICLE INDUCTIVE CHARGING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| IEC 62040-5-3:2016 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| IEC 62395-1:2013 | Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements |
| IEC 61747-1:1998+AMD1:2003 CSV | Liquid crystal and solid-state display devices - Part 1: Generic specification |
| IEC 61268:1995 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| ISO/TS 14907-1:2015 | Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures |
| IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| 15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
| IEC 61757-1:2012 | Fibre optic sensors - Part 1: Generic specification |
| UNE-EN 12368:2015 | Traffic control equipment - Signal heads |
| 98/203095 DC : DRAFT JULY 1998 | PRENV 50275-2-3 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 2-3: D.C. CHARGING STATION |
| EN 180000 : 1995 | GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS |
| EN 16704-2-1:2016 | Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS) |
| IEEE 1594-2008 | IEEE Standard for Helically Applied Fiber Optic Cable Systems (Wrap Cable) for Use on Overhead Utility Lines |
| BS EN 50556:2011 | Road traffic signal systems |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| ETR 344 : 20001 | TERMINAL EQUIPMENT (TE) - THE TECHNICAL FEASIBILITY OF A HARMONIZED PLUG AND SOCKET STANDARD |
| EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| UNE-EN 50130-5:2011 | Alarm systems - Part 5: Environmental test methods |
| 13/30264596 DC : 0 | BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER |
| BS EN 16704-2-1:2016 | Railway applications. Track. Safety protection on the track during work Common solutions and technologies. Technical requirements for Track Warning Systems (TWS) |
| I.S. EN 50556:2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| 13/30264600 DC : 0 | BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID |
| UNE-EN 50289-4-17:2016 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| BS 7987(2001) : 2001 | ROAD TRAFFIC SIGNAL SYSTEMS |
| PREN 50556 : DRAFT 2010 | ROAD TRAFFIC SIGNAL SYSTEMS |
| IEEE C37.24-2003 | IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
| CSA C22.2 No. 61010-2-012 : 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| CEI EN 60068-2-9 : 2001 | ENVIRONMENTAL TESTING - PART 2: TESTS GUIDANCE FOR SOLAR RADIATION TESTING |
| CEI EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT |
| CEI EN 50130-5 : 2012 | ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS |
| CEI EN 50483-6 : 2011 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| BS EN 62052-11 : 2003 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003) |
| NFP 99 200 : 2006 AMD 1 2016 | ROAD TRAFFIC CONTROL - ROAD TRAFFIC LIGHTS - TECHNICAL SPECIFICATIONS |
| 17/30325894 DC : 0 | BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES |
| BIS IS 15934-5 : 2011 | LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| I.S. CECC 86000:1993 | CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION) |
| EN 61300-2-30 : 1997 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - TESTS - SOLAR RADIATION |
| EN 12966:2014 | Road vertical signs - Variable message traffic signs |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| EN 61757-1 : 2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
| EN 62052-11:2003/A1:2017/AC:2018-04 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 11: METERING EQUIPMENT (IEC 62052-11:2003/A1:2016/COR1:2018) |
| EN 50512:2009 | Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS) |
| EN 50463:2007 | Railway applications - Energy measurement on board trains |
| DIN EN 12966-1:2010-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| EN 50249:2002 | Electromagnetic locators for buried pipes and cables - Performance and safety |
| CEN ISO/TS 14907-1:2015 | Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015) |
| EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.