IEC 60028:1925
Current
Current
The latest, up-to-date edition.
International standard of resistance for copper
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
01-01-1925
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
PREFACE TO FIRST EDITION
PREFACE TO SECOND EDITION
Definitions
1 Standard Annealed Copper
2 Commercial Copper
Specifies values of the physical properties of annealed copper and how the conductivity of commercial annealed copper can be calculated and expressed as a percentage of standard annealed copper.
| Committee |
TC 7
|
| DevelopmentNote |
Stability date: 2019. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Standards | Relationship |
| PN IEC 60028 : 2006 | Identical |
| UNE 20003:1954 | Identical |
| NEN N 173 : 1925 | Identical |
| 98/262057 DC : 0 | IEC 60092-374 - ELECTRICAL INSTALLATIONS IN SHIPS - SHIPBOARD TELECOMMUNICATIONS CABLES AND RADIO-FREQUENCY CABLES - PART 374: TELEPHONE CABLES FOR NON-ESSENTIAL COMMUNICATION SERVICES |
| BS EN 61869-1:2009 | Instrument transformers General requirements |
| BS EN 61196-3:1999 | Radio-frequency cables. Specifications Sectional specification for coaxial cables for local area networks |
| XP C93 503 : 2010 XP | MULTI-PAIR CABLES USED IN HIGH BIT RATE COMMUNICATION NETWORKS WITH BANDWIDTH UP TO 30 MHZ - DUCT AND BURIED CABLES |
| UTEC 93 529-1 : 2004 | CABLES FOR TELEPHONE NETWORK WITH PVC INSULATION AND PVC SHEATH - SYT SERIES |
| BS EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks Duct and buried cables |
| I.S. EN 62012-1:2002 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION |
| PREN 50463-2 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| 04/30112722 DC : DRAFT APR 2004 | IEC 60044-5 ED.1 - INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| 00/201245 DC : DRAFT FEB 2000 | IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
| 12/30268049 DC : 0 | BS EN 62689-1 - CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| 11/30251682 DC : 0 | BS EN 1977 - COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| BS EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
| DIN EN 60521 : 1995 | CLASSES 0,5, 1 AND 2 ALTERNATING-CURRENT WATTHOUR METERS |
| 15/30329546 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| BS EN 50463-2:2017 | Railway applications. Energy measurement on board trains Energy measuring |
| 15/30335854 DC : 0 | BS EN 2346-005 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN - 65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| I.S. EN 60034-18-34:2012 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS (IEC 60034-18-34:2012 (EQV)) |
| UNE-EN 50290-2-1:2010 | Communication cables -- Part 2-1: Common design rules and construction |
| 98/202856 DC : 0 | PREN 60044-1 - INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| CSA C60044-5:2007 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| 00/717056 DC : DRAFT NOV 2000 | PREN 4199-006 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT, ROUND BRAID COPPER CONDUCTORS FOR BONDING STRAPS, TIN PLATED, UP TO +150 DEGREE C, NICKEL PLATED, UP TO +260 DEGREE C - PRODUCT STANDARD |
| CEI EN 50288-1 : 2014 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| CSA C60044-5 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| CEI EN 50407-1 : 2006 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| PREN 2346-002 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
| CEI EN 60034-18-34 : 2013 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
| PREN 2346-004 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C- PART 004: DN FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| CSA C60044-8 : 2007 : R2016 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| PREN 4434 : 200P2 | AEROSPACE SERIES - COPPER OR COPPER ALLOY LIGHTWEIGHT CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD (NORMAL AND TIGHT TOLERANCES) |
| PREN 2346-003 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DL FAMILY, SINGLE CORE - PRODUCT STANDARD |
| I.S. EN 60708:2005 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| EN IEC 61869-10:2018 | Instrument transformers - Part 10: Additional requirements for low-power passive current transformers |
| IEC 60189-2:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
| CEI EN 61095 : 2010 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
| PREN 1977 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| I.S. EN 50117-1:2002 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
| I.S. EN IEC 61869-10:2018 | INSTRUMENT TRANSFORMERS - PART 10: ADDITIONAL REQUIREMENTS FOR LOW-POWER PASSIVE CURRENT TRANSFORMERS |
| BS EN 1976:2012 | Copper and copper alloys. Cast unwrought copper products |
| UNE-EN 1976:2013 | Copper and copper alloys - Cast unwrought copper products |
| BS 4743:1979 | Specification for safety requirements for electronic measuring apparatus |
| EN 61869-4:2014/AC:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS (IEC 61869-4:2013) |
| EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
| EN 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| EN 61869-3 : 2011 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011) |
| EN 60044-5:2004 | Instrument transformers - Part 5: Capacitor voltage transformers |
| EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| 04/30126721 DC : DRAFT DEC 2004 | IEC 60189-2 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 2: CABLES IN PAIRS, TRIPLES, QUADS AND QUINTUPLES FOR INSIDE INSTALLATIONS |
| 04/30126718 DC : DRAFT DEC 2004 | IEC 60189-1 ED.3 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 1: GENERAL TEST AND MEASURING METHODS |
| BS EN 60044-5:2004 | Instrument transformers Capacitor voltage transformers |
| 11/30247047 DC : 0 | BS EN 4674-004 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 004: OPEN SLEEVE - UN-PRESSURIZED AREA - EMI PROTECTION 10 KA - TEMPERATURE RANGE -65 DEGREE C +200 DEGREE C - PRODUCT STANDARD |
| PREN 50288-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| BS EN 60044-1:1999 | Instrument transformers Current transformers |
| I.S. EN 50463-2:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| BS 6156:1981 | Specification for low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single |
| 10/30228110 DC : 0 | BS EN 2346-005 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN - 65 DEGREE C AND 260 DEGREE C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| 07/30167174 DC : 0 | BS EN 61869-2 - INSTRUMENT TRANSFORMERS - PART 2: SPECIFIC REQUIREMENT FOR CURRENT TRANSFORMERS |
| BS EN 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| 07/30167396 DC : 0 | BS EN 61869-4 - INSTRUMENT TRANSFORMERS - PART 4 - SPECIFIC REQUIREMENT FOR COMBINED TRANSFORMERS |
| BS EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks Aerial cables |
| 11/30247043 DC : 0 | BS EN 4674-001 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION |
| 11/30247046 DC : 0 | BS EN 4674-003 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 003: OPEN SLEEVE - PRESSURIZED AREA - EMI PROTECTION 5 KA - TEMPERATURE RANGE -65 DEGREE C +200 DEGREE C - PRODUCT STANDARD |
| 03/304031 DC : DRAFT MAR 2003 | EN 50406-1 - END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - AERIAL CABLES |
| 99/201485 DC : DRAFT MAR 99 | EN 50288 SERIES - MULIT-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION; PART 2-1: SS FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - HORIZONTAL AND BUILDING BACKBONE CABLE: PART 2-2: SS FOR SCREENED CABLES CHARACTERISED UP TO 100 MHZ - WORK AREA & PATCH CORD CABLES; PART 3-1: SS FOR UNSCREENED CABLES CONT: |
| BS EN 61869-4:2014 | Instrument transformers Additional requirements for combined transformers |
| BS EN 60034-18-34:2012 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems |
| CEI EN 62689-1 : 1ED 2017 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| DD IEC PAS 60044-5 : DRAFT SEP 2002 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| BS IEC 60287-1-1 : 2006 | ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL |
| PREN 2234 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| PREN 50407-2 : DRAFT 2012 | MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
| CSA C60044-8 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| CEI EN 61869-4 : 2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
| CEI EN 60708 : 2006 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| ISO 4738:1982 | Copper drawing stock (wire rod) |
| XP PREN 2234 : 1995 XP | AEROSPACE SERIES - FIRE RESISTING ELECTRICAL CABLES - TECHNICAL SPECIFICATION |
| I.S. EN 61196-2:2003 | RADIO-FREQUENCY CABLES - PART 2: SECTIONAL SPECIFICATION FOR SEMI-RIGID RADIO-FREQUENCY AND COAXIAL CABLES WITH POLYTETRAFLUOROETHYLENE (PTFE) INSULATION |
| IEC 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| UNE-EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| UNE-EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
| IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV | Instrument transformers - Part 1: Current transformers |
| I.S. EN 1977:2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| I.S. EN 1976:2012 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
| DIN EN 1977:2013-04 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| VDE 0418-12 : 1995 | CLASSES 0,5, 1 AND 2 ALTERNATING CURRENT WATT HOUR METERS |
| VDE 0414-2 : 99 AMD 1 2001 | INSTRUMENT TRANSFORMERS - PART 1: INDUCTIVE VOLTAGE TRANSFORMERS |
| NEMA CC1 : 2009(R2015) | ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
| UTEC 93 533 : 2009 | CABLES WITH POLYVINYL CHLORIDE INSULATION AND POLYVINYL CHLORIDE SHEATH FOR CABLING AND INDOOR INSTALLATION OF TRANSMISSION EQUIPMENTS - GENERIC SPECIFICATION |
| I.S. EN 50288-1:2013 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| 14/30284930 DC : 0 | BS EN 62689-2 ED 1.0 - CURRENT AND VOLTAGE SENSORS OR DETECTORS TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 2: GENERAL PRINCIPLES AND REQUIREMENTS |
| BS 6561:1985 | Specification for zinc alloy sheet and strip for building |
| NFC 93 552 : 95 XP | ELECTRONIC COMPONENTS - COAXIAL CABLES FOR INSTALLATION OF TRANSMISSION EQUIPMENTS - GENERIC SPECIFICATION |
| UTEC 93 529-2 : 2004 | CABLES FOR DIGITAL TELEPHONE NETWORK AT 2 MHZ - DIGITAL SYT SERIES |
| BS 5714:1979 | Method of measurement of resistivity of metallic materials |
| BS EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification |
| BS EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control Generic specification |
| BS 7626:1993 | Specification for current transformers |
| 02/209111 DC : DRAFT SEP 2002 | PREN 50288-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| NF EN 60044-1 : 2000 AMD 2 2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| 11/30213786 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| CEI EN 50406-2 : 2006 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 2: DUCT AND BURIED CABLES |
| BS EN 61869-3:2011 | Instrument transformers Additional requirements for inductive voltage transformers |
| BS 91:1998 | Electric cable soldering sockets. Specification |
| NF EN 50117-1 : 2002 AMD 2 2013 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
| 15/30327763 DC : 0 | BS EN 2234 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| 05/30131385 DC : DRAFT MAR 2005 | IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION |
| EN 50463-2:2017 | Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
| NF EN 60044-8 : 2006 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS |
| IEC 61869-10:2017 | Instrument transformers - Part 10: Additional requirements for low-power passive current transformers |
| CSA C60044-2 : 2007 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
| CSA C60044-8 :2007 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| I.S. EN 2234:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| CSA C60044-2 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
| I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50407-1:2004 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
| CEI 20-21/1-1 : 2007 | ELECTRIC CABLES - CALCULATION OF THE CURRENT RATING - PART 1-1: CURRENT RATING EQUATIONS (100% LOAD FACTOR) AND CALCULATION OF LOSSES - GENERAL |
| UNI EN 2234 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| IEC PAS 62255-1:2001 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
| CSA C61869-1 : 2014 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| IEC 60189-3:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples |
| CSA C61869-4 : 2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
| IEC 61196-2:1995 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| IEC 62255-1:2003 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
| DIN EN 1976:2013-01 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
| IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| BS EN 4434:2005 | Aerospace series. Copper or copper alloy lightweight conductors for electrical cables. Product standard (normal and tight tolerances) |
| IEC 60044-5:2004 | Instrument transformers - Part 5: Capacitor voltage transformers |
| IEC 61869-3:2011 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
| UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
| UNI EN 1976 : 2012 | COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS |
| UNI EN 1977 : 2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| EN 50117-1 : 2002 AMD 2 2013 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
| BS EN 60044-2:1999 | Instrument transformers Inductive voltage transformers |
| BS EN 2234:2012 | Aerospace series. Cable, electrical, fire resistant. Technical specification |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| BS 807:1955 | Specification for spot welding electrodes |
| 11/30255235 DC : 0 | BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION |
| 11/30247044 DC : 0 | BS EN 4674-002 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 002: GENERAL AND LIST OF PRODUCT STANDARD |
| BIS IS/IEC 60044-1 : 2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| BS EN 61095:1993 | Specification for electromechanical contactors for household and similar purposes |
| HD 553 : 200S2 | CURRENT TRANSFORMERS |
| BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
| EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| CEI EN 61869-3 : 2012 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS |
| BS 7769-1.1:1997 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses General |
| 04/30126724 DC : DRAFT DEC 2004 | IEC 60189-3 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 3: EQUIPMENT WIRES WITH SOLID OR STRANDED CONDUCTOR, PVC INSULATED, IN SINGLES, PAIRS AND TRIPLES |
| UNE-EN 61869-4:2017 | Instrument transformers - Part 4: Additional requirements for combined transformers |
| 03/304032 DC : DRAFT MAR 2003 | EN 50406-2 - END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - DUCT AND BURIED CABLES |
| I.S. EN 61869-3:2011 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011) |
| CSA C61869-3 : 2014 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS |
| 13/30281408 DC : 0 | BS EN 61869-10 - INSTRUMENT TRANSFORMERS - PART 10: ADDITIONAL REQUIREMENTS FOR LOW-POWER, STAND-ALONE CURRENT SENSORS |
| UNE-EN 61869-3:2012 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
| 17/30354704 DC : 0 | BS ISO 19642-1 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 1: TERMINOLOGY AND DESIGN GUIDELINES |
| CEI EN 62012-1 : 2003 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 50290-2-1:2005 | Communication cables Common design rules and construction |
| 12/30260599 DC : 0 | BS EN 50407-2 - MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
| BS EN 61196-2:2003 | Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| BS 6017:1981 | Specification for copper refinery shapes |
| DD ENV 50196:1995 | Live working. Required insulation level and related air distances. Calculation method |
| I.S. EN 60044-5:2004 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| VDE 0414-1 : 2001 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| CSA C60044-1 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| CSA C60044-1 : 2007 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| NFC 93 533 : 94 AMD 1 96 XP | ELECTRONIC COMPONENTS - CABLES WITH PVC INSULATION AND PVC SHEATH FOR WIRING AND INDOOR TRANSMISSION EQUIPMENT - GENERIC SPECIFICATION |
| NF EN 60034-18-34 : 2013 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
| I.S. EN 61869-4:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
| UNE 212002-2:2014 | Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations. |
| CEI EN 50463-2 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| NF EN 61095 : 2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| IEC 60287-1-1:2006+AMD1:2014 CSV | Electric cables - Calculation of the current rating - Part 1-1:Current rating equations (100 % load factor) and calculation of losses - General |
| I.S. EN 50406-2:2004 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 2: DUCT AND BURIED CABLES |
| I.S. EN 50406-1:2004 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 1: AERIAL CABLES |
| IEC 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
| BS EN 1978:1998 | Copper and copper alloys. Copper cathodes |
| 97/200935 DC : DRAFT JAN 1997 | IEC 60364 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - REVISION OF CHAPTER 54: EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
| IEC 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| IEC 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| BS EN 2346-003:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DL family, single core. Product standard |
| IEC 61095:2009 | Electromechanical contactors for household and similar purposes |
| BS EN 2083:2001 | Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard |
| BS EN 2346-004:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C DN family, single UV laser printable and multicore assembly. Light weight. Product standard |
| EN 61196-2:2003 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| EN 2346-004:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 C and 260 C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard |
| EN 4434:2005 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) |
| EN 2346-002:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 002: General |
| EN 2346-003:2006 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 003: DL family, single core - Product standard |
| EN 2083:2001 | Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard |
| EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 2234:2018 | Aerospace series - Cable, electrical, fire resistant - Technical specification |
| 01/710719 DC : DRAFT JUL 2001 | PREN 4608-001 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND MULTICORE ASSEMBLY, SCREENED AND JACKETED - PART 001: TECHNICAL SPECIFICATION |
| IEC 60092-375:1977 | Electrical installations in ships. Shipboard telecommunication cables and radio-frequency cables. General instrumentation, control and communication cables |
| 03/316192 DC : DRAFT SEP 2003 | IEC 60708-1 ED 2 - LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH - PART 1: GENERAL DESIGN DETAILS AND REQUIREMENTS |
| BS EN 62004:2009 | Thermal-resistant aluminium alloy wire for overhead line conductor |
| CEI EN 62004 : 2010 | THERMAL-RESISTANT ALUMINIUM ALLOY WIRE FOR OVERHEAD LINE CONDUCTOR |
| 03/308375 DC : DRAFT JUNE 2003 | IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS |
| 06/30155398 DC : 0 | EN 2234 - CABLES, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| BS 5685-1:1979 | Electricity meters Specification for Class 0.5, 1 and 2 single-phase and polyphase, single rate and multi-rate watt-hour meters |
| I.S. EN 62004:2009 | THERMAL RESISTANT ALUMINIUM ALLOY WIRE FOR OVERHEAD LINE CONDUCTOR |
| BS DD IEC PAS 62255-1 : 2001 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
| RC.AERO 54305 : A1962 | |
| I.S. EN 50407-3:2014 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATIONS NETWORKS - PART 3: INDOOR MULTI-PAIR/QUAD RISER CABLES UP TO 100 MHZ FOR MAXIMUM LENGTH OF CONNECTION 100 M SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBIT/S OVER IP |
| BS EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks Outdoor cables |
| 98/203654 DC : DRAFT JULY 1998 | |
| 02/207659 DC : DRAFT JULY 2002 | PREN 50290-2-1 - COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
| 09/30194359 DC : 0 | BS EN 60034-18-34 - ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
| PREN 2346-005 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| BS EN 50117-1 : 2002 | COAXIAL CABLES - PART 1: GENERIC SPECIFICATION |
| PREN 2083 : 2 | AEROSPACE SERIES - COPPER OR COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
| CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| UNE 21144-1-1:2012 | Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General |
| I.S. EN 61095:2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| IEC 62004:2007 | Thermal-resistant aluminium alloy wire for overhead line conductor |
| IEC 61196-1:2005 | Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
| I.S. EN 2346-005:2017 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| UNE 212002-1:2014 | Low-frequency cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods. |
| EN 2346-005:2017 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard |
| IEC PAS 60044-5:2002 | Instrument transformers - Part 5: Capacitor voltage transformers |
| I.S. EN 50290-2-1:2005 | COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
| IEC 61869-1:2007 | Instrument transformers - Part 1: General requirements |
| IEC 62888-2:2018 | Railway applications - Energy measurement on board trains - Part 2: Energy measurement |
| I.S. EN 61196-3:1999 | RADIO FREQUENCY CABLES - PART 3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR LOCAL AREA NETWORKS |
| BS EN 2346-002:2006 | Aerospace series. Cable, electrical, fire resistant. Operating temperatures between -65°C and 260°C General |
| IEC 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks |
| BS EN 1977:2013 | Copper and copper alloys. Copper drawing stock (wire rod) |
| IEC 60044-2:1997+AMD1:2000+AMD2:2002 CSV | Instrument transformers - Part 2 : Inductive voltage transformers |
| EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
| EN 62004:2009 | Thermal-resistant aluminium alloy wire for overhead line conductor |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 60044-1:1999/A2:2003 | INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
| EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
| EN 60708:2005/AC:2016-08 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks |
| EN 60044-2:1999/A2:2003 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
| EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
| EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
| EN 50290-2-1:2005 | Communication cables - Part 2-1: Common design rules and construction |
| EN 61095:2009 | Electromechanical contactors for household and similar purposes |
| ANSI/NEMA CC 1:2018(R2023) | Electric Power Connection for Substations |
| AS 61869.4:2021 | Instrument transformers Additional requirements for combined transformers (IEC 61869-4:2013 (ED.1.0) MOD) |
| AS 61869.10:2021 | Instrument transformers Additional requirements for low-power passive current transformers (IEC 61869-10:2017 (ED 1.0) MOD) |
| AS 61869.3:2021 | Instrument transformers Additional requirements for inductive voltage transformers (IEC 61869-3:2011 (ED.1.0) MOD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.