ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IBC® Code and Commentary, Volume 2
Available format(s)
Hardcopy , PDF
Superseded date
07-08-2020
Superseded by
Language(s)
English
Published date
01-01-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
CHAPTER 16 - STRUCTURAL DESIGN
CHAPTER 17 - SPECIAL INSPECTIONS AND TESTS
CHAPTER 18 - SOILS AND FOUNDATIONS
CHAPTER 19 - CONCRETE
CHAPTER 20 - ALUMINUM
CHAPTER 21 - MASONRY
CHAPTER 22 - STEEL
CHAPTER 23 - WOOD
CHAPTER 24 - GLASS AND GLAZING
CHAPTER 25 - GYPSUM BOARD, GYPSUM
PANEL PRODUCTS AND PLASTER
CHAPTER 26 - PLASTIC
CHAPTER 27 - ELECTRICAL
CHAPTER 28 - MECHANICAL SYSTEMS
CHAPTER 29 - PLUMBING SYSTEMS
CHAPTER 30 - ELEVATORS AND CONVEYING SYSTEMS
CHAPTER 31 - SPECIAL CONSTRUCTION
CHAPTER 32 - ENCROACHMENTS INTO THE
PUBLIC RIGHT-OF-WAY
CHAPTER 33 - SAFEGUARDS DURING CONSTRUCTION
CHAPTER 34 - RESERVED
CHAPTER 35 - REFERENCED STANDARDS
APPENDIX A - EMPLOYEE QUALIFICATIONS
APPENDIX B - BOARD OF APPEALS
APPENDIX C - GROUP U - AGRICULTURAL BUILDINGS
APPENDIX D - FIRE DISTRICTS
APPENDIX E - SUPPLEMENTARY ACCESSIBILITY
REQUIREMENTS
APPENDIX F - RODENTPROOFING
APPENDIX G - FLOOD-RESISTANT CONSTRUCTION
APPENDIX H - SIGNS
APPENDIX I - PATIO COVERS
APPENDIX J - GRADING
APPENDIX K - ADMINISTRATIVE PROVISIONS
APPENDIX L - EARTHQUAKE RECORDING INSTRUMENTATION
APPENDIX M - TSUNAMI-GENERATED FLOOD HAZARD
INDEX
| DevelopmentNote |
COMBO (VOL. 1 + VOL. 2) also available. (08/2014)
|
| DocumentType |
Standard
|
| ISBN |
978-1-60983-282-7
|
| Pages |
715
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ASM 35,AAMA/WDMA/CSA 101/I.S.2/A440—11,AISI S100—12,AISI S110—07/S1-09 (2012),AISI S200—12,AISI S210—07(2012),AISI S211—07/S1-12(2012),AISI S212—07(2012),AISI S213—07/S1-09 (2012),AISI S214—12,AISI S220—11,AISI S230—07/S3-12(2012),ANSI/A 190.1—12,A13.1—2007,A108.1A—99,A108.1B—99,A108.4—99,A108.5—99,A108.6—99,A108.8—99,A108.9—99,A108.10—99,ANSI/A 190.1—12,ANSI/APA PRP 210—08,ANSI/APA PRR 410—11,APA PDS—12,APA PDS Supplement 1—12,APA PDS Supplement 2—12,APA PDS Supplement 3—12,APA PDS Supplement 4—12,APA PDS Supplement 5—12,APA PRG 320—11,EWS R540—12,EWS S475—07,EWS S560—10,EWS T300—07,EWS X440—08,EWS X450—01,ASABE :-EP 484.2 June 1998 (R2008),EP 486.2 OCT 2012,EP 559.1 W/Corr.1 AUG 2010,ASCE/SEI 5-13,ASCE/SEI 6-13,ASCE/SEI 7-10,ASCE/SEI 8-14,ASCE/SEI 19-09,ASCE/SEI 29-14,ASCE/SEI 32-01,ASCE/SEI 49-07,AWC WCD No. 4—2003,AWC WFCM—2015,ANSI/AWC NDS—2015,AWC STJR—2015,ANSI/AWC PWF—2015,AWC SDPWS—2015,AWCI 12-B-04,AWPA C1—03,AWPA M4—11,AWPA U1—14,CSSB—97,ANSI/DASMA 107—1997(R2012),DASMA 108—12,DASMA 115—12,DOC PS-1—09,DOCPS-2—10,DOC PS 20—05,FEMA-TB-11—01,GA 216—13,GA 600—12,ICC 300—12,ICC 400—12,ICC 500—14,SBCCI SSTD 11—97,ANSI MH29.1—08,NCMA TEK 5—84 (1996),PCI MNL 128—01,PTI DC—10.5-12,ANSI/MH16.1—12,ANSI/FS 100-12,ANSI/NC1.0—10,ANSI/RD1.0—10,SDI-C—2011,SDI-QA/QC—2011,ANSI/SPRI/FM4435-ES-1—11,ANSI/SPRI RP-4—13,ANSI/SPRI VF1—10,TMS 216—2013,TIA 222-G-05,TMS 302—2012,TMS 402—2013,TMS 403—2013,TMS 602—2013,TPI 1—2014,AAMA/WDMA/CSA 101/I.S.2/A440—11,WRI/CRSI—81,AITC Technical Note 7—96.
|
| PublisherName |
International Code Council (ICC)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM E 970 : 2017 : REDLINE | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| TIA 222 : H2017 | STRUCTURAL STANDARD FOR ANTENNA SUPPORTING STRUCTURES AND ANTENNAS AND SMALL WIND TURBINE SUPPORT STRUCTURES |
| ACI 530 : 1995 | BUILDING CODE REQUIREMENTS FOR MASONRY STRUCTURES AND SPECIFICATIONS FOR MASONRY STRUCTURES AND RELATED COMMENTARIES |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| UL 103:11ED 2010-10-15 | Factory-Built Chimneys for Residential Type and Building Heating Appliances |
| ACI 543R : 2012 | GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
| NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| UL 555:7ED 2006-07-12 | Fire Dampers |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| UL 555C:4ED 2014-12-16 | Ceiling Dampers |
| NFPA 288 : 2017 | STANDARD METHODS OF FIRE TESTS OF HORIZONTAL FIRE DOOR ASSEMBLIES INSTALLED IN HORIZONTAL FIRE RESISTANCE-RATED ASSEMBLIES |
| ANSI A118.3 : 1992 | SPECIFICATIONS FOR CHEMICAL RESISTANT, WATER CLEANABLE TILE-SETTING AND GROUTING EPOXY ADHESIVE |
| UL 9:8ED 2009-07-02 | Standard for Fire Tests of Window Assemblies |
| ICC IECC INTERNATIONAL ENERGY CONSERVATION CODE : 2015 | INTERNATIONAL ENERGY CONSERVATION CODE |
| ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ANSI Z97.1 : 2015 | SAFETY GLAZING MATERIALS USED IN BUILDINGS - SAFETY PERFORMANCE SPECIFICATIONS AND METHODS OF TEST |
| ANSI A118.6 : 1992 | SPECIFICATIONS FOR CERAMIC TILE GROUTS |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| ICC IRC INTERNATIONAL RESIDENTIAL CODE : 2015 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| FM 4470 : 2016 | SINGLE-PLY, POLYMER-MODIFIED BITUMEN SHEET, BUILT-UP ROOF (BUR) AND LIQUID APPLIED ROOF ASSEMBLIES FOR USE IN CLASS 1 AND NONCOMBUSTIBLE ROOF DECK CONSTRUCTION |
| BHMA A156.19 : 2013 | POWER ASSIST AND LOW ENERGY POWER OPERATED DOORS |
| APSP 7 : 2013 | SUCTION ENTRAPMENT AVOIDANCE IN POOLS |
| NFPA 701 : 2015 | FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS |
| NFPA 259 : 2013 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| ICC 500 : 2008 | STANDARD FOR THE DESIGN AND CONSTRUCTION OF STORM SHELTERS |
| ASCE/SEI 19 10 : 2010 | STRUCTURAL APPLICATIONS OF STEEL CABLES FOR BUILDINGS |
| ASCE 29 05 : 2007 | STANDARD CALCULATION METHODS FOR STRUCTURAL FIRE PROTECTION |
| ASTM C 62 : 2017 : REDLINE | Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
| UL 864:10ED 2014-12-01 | Standard for Control Units and Accessories for Fire Alarm Systems |
| NFPA 110 : 2016 | EMERGENCY AND STANDBY POWER SYSTEMS |
| CFR 44 : OCT 2017 | EMERGENCY MANAGEMENT AND ASSISTANCE |
| NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
| ASTM C 206 : 2014 : REDLINE | Standard Specification for Finishing Hydrated Lime |
| ASTM C 475/C475M : 2017 : REDLINE | Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ASTM E 1996 : 2017 : REDLINE | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ANSI/ASSE Z359.1 : 2007 | THE FALL PROTECTION CODE |
| AISC 341 : 2016 | SEISMIC PROVISIONS FOR STRUCTURAL STEEL BUILDINGS |
| ASTM C 212 : 2017 : REDLINE | Standard Specification for Structural Clay Facing Tile |
| ASTM C 91 : 2005 | Standard Specification for Masonry Cement |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| ASTM A 706/A706M : 2016 : REDLINE | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| UL 1784:4ED 2015-02-17 | Standard for Air Leakage Tests of Door Assemblies and Other Opening Protectives |
| ASTM F 547 : 2017 : REDLINE | Standard Terminology of Nails for Use with Wood and Wood-Base Materials |
| UL 305:6ED 2012-07-12 | Panic Hardware |
| CFR 28(PTS 43-END) : JUL 2017 | JUDICIAL ADMINISTRATION - NATIONAL ARCHIVES AND RECORDS ADMINISTRATION |
| ANSI A136.1 : 1992 | ORGANIC ADHESIVES FOR INSTALLATION OF CERAMIC TILE |
| CGSB 37-GP-56M : 80 AMD 1 85 | MEMBRANE, MODIFIED, BITUMINOUS, PREFABRICATED, AND REINFORCED FOR ROOFING |
| FM 4430 : 2012 | HEAT AND SMOKE VENTS |
| ASTM D 1668 : 1997 : REV A : R2006 | Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
| ASTM B 101 : 2012 : REDLINE | Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction |
| ASTM A 875/A875M : 2013 : REDLINE | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
| NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
| CGSB 37-GP-52M : 1984 | ROOFING AND WATERPROOFING MEMBRANE, SHEET APPLIED, ELASTOMERIC |
| NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
| NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
| UL 2200:2ED 2012-06-01 | Standard for Stationary Engine Generator Assemblies |
| NFPA 276 : 2015 | METHOD OF FIRE TEST FOR DETERMINING THE HEAT RELEASE RATE OF ROOFING ASSEMBLIES WITH COMBUSTIBLE ABOVE-DECK ROOFING COMPONENTS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
| BS EN 15250:2007 | Slow heat release appliances fired by solid fuel. Requirements and test methods |
| NFPA 13R : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN LOW-RISE RESIDENTIAL OCCUPANCIES |
| ASTM E 2570 : 2007 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM D 7254 : 2017 : REDLINE | Standard Specification for Polypropylene (PP) Siding |
| AITC 200 : 2009 | MANUFACTURING QUALITY CONTROL SYSTEMS MANUAL |
| ASTM E 2634 : 2017-06 | SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| ASTM E 1300 : 2016 : REDLINE | Standard Practice for Determining Load Resistance of Glass in Buildings |
| AMCA 540 : 2013 | TEST METHOD FOR LOUVERS IMPACTED BY WIND BORNE DEBRIS |
| ASTM E 108 : 2017 : REDLINE | Standard Test Methods for Fire Tests of Roof Coverings |
| ANSI A118.5 : 1992 | SPECIFICATIONS FOR CHEMICAL RESISTANT FURAN RESIN MORTARS AND GROUTS FOR TILE INSTALLATION |
| UL 2079:5ED 2015-08-26 | Tests for Fire Resistance of Building Joint Systems |
| UL 10B:10ED 2008-02-07 | Standard for Fire Tests of Door Assemblies |
| ASTM C 42/C 42M : 2016-10 | TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
| ASTM E 2573 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
| ANSI A118.8 : 1992 | SPECIFICATIONS FOR MODIFIED EPOXY EMULSION MORTAR GROUT |
| ACI 229R : 2013 | REPORT ON CONTROLLED LOW-STRENGTH MATERIALS |
| NFPA 275 : 2017 | STANDARD METHOD OF FIRE TESTS FOR THE EVALUATION OF THERMAL BARRIERS |
| UL 1040:1ED 1996-08-09 | Fire Test of Insulated Wall Construction |
| ANSI/BHMA A156.10 : 2017 | POWER OPERATED PEDESTRIAN DOORS |
| ICC IFGC INTERNATIONAL FUEL GAS CODE : 2015 | INTERNATIONAL FUEL GAS CODE |
| ACI 530.1 : 1995 | SPECIFICATIONS FOR MASONRY STRUCTURES |
| NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
| ASTM D 6509/D6509M : 2016 : REDLINE | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements |
| ANSI A137.1 : 2012(R2013) | SPECIFICATIONS FOR CERAMIC TILE |
| ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
| UL 2075:2ED 2013-03-05 | Gas and Vapor Detectors and Sensors |
| ANSI A118.4 : 1992 | SPECIFICATIONS FOR LATEX PORTLAND CEMENT MORTAR |
| ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
| UL 1975:3ED 2006-11-27 | Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes |
| AISC 360 : 2016 | SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| ISO 8115:1986 | Cotton bales Dimensions and density |
| ASCE/SEI 49 12 : 2012 | WIND TUNNEL TESTING FOR BUILDINGS AND OTHER STRUCTURES |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| ASTM E 2072 : 2014 : REDLINE | Standard Specification for Photoluminescent (Phosphorescent) Safety Markings (Withdrawn 2023) |
| ASTM A 463/A463M : 2015 : REDLINE | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
| AITC 119 : 1996 | STANDARD SPECIFICATIONS FOR STRUCTURAL GLUED LAMINATED TIMBER OF HARDWOOD SPECIES |
| ASCE 8 02 : 2002 | SPECIFICATION FOR THE DESIGN OF COLD-FORMED STAINLESS STEEL STRUCTURAL MEMBERS |
| ICC 600 : 2008 | STANDARD FOR RESIDENTIAL CONSTRUCTION IN HIGH-WIND REGIONS |
| AITC 104 : 2003 | TYPICAL CONSTRUCTION DETAILS |
| ASTM C 845 : 2004 | Standard Specification for Expansive Hydraulic Cement |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ACI 306R : 2016 | GUIDE TO COLD WEATHER CONCRETING |
| AWS D1.4/D1.4M : 2011 | STRUCTURAL WELDING CODE - REINFORCING STEEL |
| ASTM E 331 : 2000 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| ASTM G 152 : 2013 : REDLINE | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| ICC IPSDC INTERNATIONAL PVT. SEWAGE DISPOSAL CODE : 2015 | INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE |
| ASTM D 7032 : 2017 : REDLINE | Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
| ACI 216.1 : 2014 | CODE REQUIREMENTS FOR DETERMINING FIRE RESISTANCE OF CONCRETE AND MASONRY CONSTRUCTION ASSEMBLIES |
| ASTM B 370 : 2012 : REDLINE | Standard Specification for Copper Sheet and Strip for Building Construction |
| ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
| ASTM C 55 : 2017 : REDLINE | Standard Specification for Concrete Building Brick |
| NFPA 285 : 2012 | FIRE TEST METHOD FOR EVALUATION OF FIRE PROPAGATION CHARACTERISTICS OF EXTERIOR NON-LOAD-BEARING WALL ASSEMBLIES CONTAINING COMBUSTIBLE COMPONENTS |
| CGSB 37.54 : 1995 | POLYVINYL CHLORIDE ROOFING AND WATERPROOFING MEMBRANE |
| UL 127:9ED 2011-04-21 | Standard for Factory-Built Fireplaces |
| UL 2196:2ED 2017-08-29 | Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables |
| ASTM C 172/C172M : 2017 : REDLINE | Standard Practice for Sampling Freshly Mixed Concrete |
| ICC 400 : 2007 | STANDARD ON THE DESIGN AND CONSTRUCTION OF LOG STRUCTURES |
| ICC IBC INTERNATIONAL BUILDING CODE : 2015 | INTERNATIONAL BUILDING CODE |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| ASTM F 2200 : 2017 : REDLINE | Standard Specification for Automated Vehicular Gate Construction |
| UL 14B:9ED 2008-12-15 | Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors |
| AITC 117 : 2010 | STANDARD SPECIFICATIONS FOR STRUCTURAL GLUED LAMINATED TIMBER OF SOFTWOOD SPECIES |
| FM 4474 : 2004(R2010) | EVALUATING THE SIMULATED WIND UPLIFT RESISTANCE OF ROOF ASSEMBLIES USING STATIC POSITIVE AND/OR NEGATIVE DIFFERENTIAL PRESSURES |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| BHMA A156.27 : 2011 | POWER AND MANUAL OPERATED REVOLVING PEDESTRIAN DOORS |
| ICC IWUIC INTERNATIONAL WILDLAND U.I. CODE : 2015 | INTERNATIONAL WILDLAND-URBAN INTERFACE CODE |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| UL 325:7ED 2017-05-19 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
| ACI PRC-506 : 2016 | GUIDE TO SHOTCRETE |
| ASTM D 6103 : 2004 | Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM) (Withdrawn 2013) |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| UL 10C:3ED 2016-06-09 | Positive Pressure Fire Tests of Door Assemblies |
| ANSI A118.1 : 1999 | SPECIFICATIONS FOR DRY-SET PORTLAND CEMENT MORTAR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| UL 10A:21ED 2009-01-30 | Tin-Clad Fire Doors |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| UL 555S:5ED 2014-02-13 | Smoke Dampers |
| ALI ALCTV : 2011 | Standard For Automotive Lifts - Safety Requirements For Construction, Testing, And Validation |
| NFPA 409 : 2016 | AIRCRAFT HANGARS |
| ASTM C 406/C406M : 2015 : REDLINE | Standard Specification for Roofing Slate |
| NFPA 40 : 2016 | STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
| NFPA 265 : 2015 | METHODS OF FIRE TESTS FOR EVALUATING ROOM FIRE GROWTH CONTRIBUTION OF TEXTILE OR EXPANDED VINYL WALL COVERINGS ON FULL HEIGHT PANELS AND WALLS |
| ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 257 : 2017 | FIRE TEST FOR WINDOW AND GLASS BLOCK ASSEMBLIES |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| NFPA 268 : 2017 | TEST METHOD FOR DETERMINING IGNITIBILITY OF EXTERIOR WALL ASSEMBLIES USING A RADIANT HEAT ENERGY SOURCE |
| UL 924:10ED 2016-05-09 | Emergency Lighting and Power Equipment |
| NFPA 111 : 2016 | STORED ELECTRICAL ENERGY EMERGENCY AND STANDBY POWER SYSTEMS |
| ASTM C 73 : 2017 : REDLINE | Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| ICC IMC INTERNATIONAL MECHANICAL CODE : 2015 | INTERNATIONAL MECHANICAL CODE |
| CFR 36(PTS300-END) : JUL 2017 | PARKS, FORESTS, AND PUBLIC PROPERTY - FOREST SERVICE, DEPARTMENT OF AGRICULTURE |
| NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
| ANSI MH16.1 : 2012 | SPECIFICATION FOR THE DESIGN, TESTING AND UTILIZATION OF INDUSTRIAL STEEL STORAGE RACKS |
| ANSI A41.1 : 1953 | MASONRY, BUILDING CODE REQUIREMENTS FOR, |
| ICC IPMC INTERNATIONAL PROPERTY MAINTENANCE CODE : 2015 | INTERNATIONAL PROPERTY MAINTENANCE CODE |
| ASCE/SEI 24 14 : 2014 | FLOOD RESISTANT DESIGN AND CONSTRUCTION |
| AWS D1.3 : 1998 ERRATA 1998 | STRUCTURAL WELDING CODE - SHEET STEEL |
| ISO 8336:2017 | Fibre-cement flat sheets — Product specification and test methods |
| ASTM D 6223/D6223M : 2016 : REDLINE | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
| ICC IPC INTERNATIONAL PLUMBING CODE : 2015 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
| UL 580:5ED 2006-11-02 | Tests for Uplift Resistance of Roof Assemblies |
| UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
| UL 14C:8ED 2006-10-27 | Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs |
| NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| ASTM D 6754 : 2002 | Standard Specification for Ketone Ethylene Ester Based Sheet Roofing |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| AITC 110 : 2001 | STANDARD APPEARANCE GRADES FOR STRUCTURAL GLUED LAMINATED TIMBER |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
| ICC IEBC INTERNATIONAL EXISTING BUILDING CODE : 2015 | INTERNATIONAL EXISTING BUILDING CODE |
| ASTM C 494/C494M : 2017 : REDLINE | Standard Specification for Chemical Admixtures for Concrete |
| NFPA 12A : 2015 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| NAAMM FP1001 : 2007 | GUIDE SPECIFICATIONS FOR DESIGN OF METAL FLAGPOLES |
| FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
| NFPA 13D : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
| ADM 1 : 2015 | ALUMINUM DESIGN MANUAL |
| ASCE/SEI 55 10 : 2010 | TENSILE MEMBRANE STRUCTURES |
| ASTM E 2178 : 2013 : REDLINE | Standard Test Method for Air Permeance of Building Materials |
| AITC 113 : 2010 | STANDARD FOR DIMENSIONS OF STRUCTURAL GLUED LAMINATED TIMBER |
| ACI 306.1 : 1990 | STANDARD SPECIFICATION FOR COLD WEATHER CONCRETING |
| ANSI MH29.1 : 2012 | SAFETY REQUIREMENTS FOR INDUSTRIAL SCISSORS LIFTS |
| ICC IFC INTERNATIONAL FIRE CODE : 2015 | INTERNATIONAL FIRE CODE |
| ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| ASTM A 588/A588M : 2015 : REDLINE | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
| NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
| ASTM D 6878/D6878M : 2017 : REDLINE | Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing |
| UL 1482:7ED 2011-04-25 | Solid-Fuel Type Room Heaters |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| HPVA HP 1 : 2016 | HARDWOOD AND DECORATIVE PLYWOOD |
| ASCE 32 01 : 2001 | DESIGN AND CONSTRUCTION OF FROST-PROTECTED SHALLOW FOUNDATIONS |
| NFPA 80 : 2016 | FIRE DOORS AND OTHER OPENING PROTECTIVES |
| NFPA 253 : 2015 | STANDARD METHOD OF TEST FOR CRITICAL RADIANT FLUX OF FLOOR COVERING SYSTEMS USING A RADIANT HEAT ENERGY SOURCE |
| NFPA 418 : 2016 | HELIPORTS |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| ASTM C 331/C331M : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 6222/D6222M : 2016 : REDLINE | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| UL 1897:7ED 2015-09-23 | Uplift Tests for Roof Covering Systems |
| NFPA 105 : 2016 | SMOKE DOOR ASSEMBLIES AND OTHER OPENING PROTECTIVES |
| ICC 300 : 2007 | BLEACHERS, FOLDING AND TELESCOPIC SEATING, AND GRANDSTANDS |
| NFPA 92 : 2015 | SMOKE CONTROL SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.