ICC 2012 INT. ENERGY CONSV. CODE : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INTERNATIONAL ENERGY CONSERVATION CODE
Hardcopy , PDF
06-08-2020
English
01-01-2012
IECC - COMMERCIAL PROVISIONS
CHAPTER 1 - SCOPE AND ADMINISTRATION
CHAPTER 2 - DEFINITIONS
CHAPTER 3 - GENERAL REQUIREMENTS
CHAPTER 4 - COMMERCIAL ENERGY EFFICIENCY
CHAPTER 5 - REFERENCED STANDARDS
INDEX
IECC - RESIDENTIAL PROVISIONS
CHAPTER 1 - SCOPE AND ADMINISTRATION
CHAPTER 2 - DEFINITIONS
CHAPTER 3 - GENERAL REQUIREMENTS
CHAPTER 4 - RESIDENTIAL ENERGY EFFICIENCY
CHAPTER 5 - REFERENCED STANDARDS
INDEX
Applicable to commercial & residential buildings and the buildings sites and associated systems and equipment.
DocumentType |
Standard
|
ISBN |
978-1-60983-058-8
|
Pages |
116
|
PublisherName |
International Code Council (ICC)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
ICC 2012 INTERNATIONAL PERFORM. CODE : 2012 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
ICC 2012 INT. EXIST. BUILDING CODE : 2012 | INTERNATIONAL EXISTING BUILDING CODE |
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
CTI ATC 105 : 2000 | ACCEPTANCE TEST CODE FOR WATER COOLING TOWERS |
ASTM E 1677 : 2011 : REDLINE | SPECIFICATION FOR AIR BARRIER (AB) MATERIAL OR SYSTEM FOR LOW-RISE FRAMED BUILDING WALLS |
AHRI 340/360 : 2007 | PERFORMANCE RATING OF COMMERCIAL AND INDUSTRIAL UNITARY AIR-CONDITIONING AND HEAT PUMP EQUIPMENT |
CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
ASTM C 1003 : 1983 : R1992 : EDT 1 | Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box (Withdrawn 1997) |
AHRI 390 : 2003 | PERFORMANCE RATING OF SINGLE PACKAGE VERTICAL AIR-CONDITIONERS AND HEAT PUMPS |
AHRI 310/380 : 2004 | PACKAGED TERMINAL AIR-CONDITIONERS AND HEAT PUMPS |
AHRI 400 : 2001 | LIQUID TO LIQUID HEAT EXCHANGERS |
CSA 4.3 : 2014 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
AHRI 440 : 2008 | PERFORMANCE RATING OF ROOM FAN-COILS |
AHRI 560 : 2000 | ABSORPTION WATER CHILLING AND WATER HEATING PACKAGES |
CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
NAGDM 105 : 1992 | TEST METHOD FOR THERMAL TRANSMITTANCE & AIR INFILTRATION OF GARAGE DOORS |
ASTM E 903 : 2012 | Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres |
AHAM RAC 1 : 1982 | ROOM AIR CONDITIONERS |
ISO 13256-2:1998 | Water-source heat pumps Testing and rating for performance Part 2: Water-to-water and brine-to-water heat pumps |
ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
CFR 16(PTS0-999) : 0 | COMMERCIAL PRACTICES |
AHRI 210/240 : 2006 | PERFORMANCE RATING OF UNITARY AIR-CONDITIONING AND AIR-SOURCE HEAT PUMP EQUIPMENT |
ASTM C 1549 : 2016 : REDLINE | Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
CTI STD 201 : 0 | PERFORMANCE RATING OF EVAPORATIVE HEAT REJECTION EQUIPMENT |
ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
ICC 400 : 2007 | STANDARD ON THE DESIGN AND CONSTRUCTION OF LOG STRUCTURES |
ASTM E 408 : 2013 : REDLINE | Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
ASHRAE 119 : 1988(RA 2004) | AIR LEAKAGE PERFORMANCE FOR DETACHED SINGLE-FAMILY RESIDENTIAL BUILDINGS |
AMCA 500 D : 2012 | LABORATORY METHODS OF TESTING DAMPERS FOR RATING |
ASTM C 1371 : 2015 : REDLINE | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
CFR 10(PTS400-499) : JAN 96 | ENERGY |
ISO 13256-1:1998 | Water-source heat pumps Testing and rating for performance Part 1: Water-to-air and brine-to-air heat pumps |
AHRI 460 : 2005 | PERFORMANCE RATING OF REMOTE MECHANICAL-DRAFT AIR-COOLED REFRIGERANT CONDENSERS |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
AHRI 550/590 : 2003 | PERFORMANCE RATING OF WATER-CHILLING PACKAGES USING THE VAPOR COMPRESSION CYCLE |
AHRI 1160 : 2004 | PERFORMANCE RATING OF HEAT PUMP POOL HEATERS |
ASTM E 1980 : 2011 | Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces |
ASHRAE 140 : 2014 | METHOD OF TEST FOR THE EVALUATION OF BUILDING ENERGY ANALYSIS COMPUTER PROGRAMS |
ASTM E 2178 : 2013 : REDLINE | Standard Test Method for Air Permeance of Building Materials |
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
AHRI 365 : 2002 | COMMERCIAL AND INDUSTRIAL UNITARY AIR-CONDITIONING CONDENSING UNITS |
CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
CSA/ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
ASHRAE HDBK HVAC SYSTEMS & EQUIPMENT : 2012 | ASHRAE HANDBOOK - HVAC SYSTEMS AND EQUIPMENT |
ASHRAE 146 : 2011 | METHODS OF TESTING AND RATING POOL HEATERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.