I.S. HD 631.2:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
Hardcopy , PDF
12-12-2017
English
01-01-2007
1 Scope
2 Normative references
3 Terms and definitions
4 Fingerprinting
4.1 General
4.2 Sampling
4.3 Preparation and conditioning
4.4 Tests
4.5 Test report
5 Type tests
5.1 General
5.2 Sampling
5.3 Preparation and conditioning
5.4 Tests
5.5 Test report
Annex A (informative) Health and safety
Annex B (normative) Dimensions after full recovery
Annex C (normative) General requirements
Describes the test methods and requirements for fingerprinting and type testing of heat shrinkable components intended to be used for electrical insulation or electrical insulation and mechanical protection in cable accessories for low voltage, as defined in EN 50393.
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
Standards | Relationship |
HD 631.2 : 2007 | Identical |
IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
ISO 8013:2012 | Rubber, vulcanized Determination of creep in compression or shear |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
HD 429 : 200S1 | METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
ISO 4587:2003 | Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
EN ISO 11358:1997 | Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
ISO 62:2008 | Plastics Determination of water absorption |
IEC 60050-461:2008 | International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables |
EN 60811-2-1 : 98 AMD 1 2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE, HOT SET AND MINERAL OIL IMMERSION TESTS |
EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
IEC 60811-2-1:1998+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
EN 50393:2015 | Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV |
EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.