I.S. EN ISO 80601-2-69:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014)
Hardcopy , PDF
19-12-2020
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
201.1 Scope, object and related standards
201.2 Normative references
201.3 Terms and definitions
201.4 General requirements
201.5 General requirements for testing of ME EQUIPMENT
201.6 Classification of ME EQUIPMENT and ME SYSTEMS
201.7 ME EQUIPMENT identification, marking and documents
201.8 Protection against electrical HAZARDS from
ME EQUIPMENT
201.9 Protection against mechanical HAZARDS of ME EQUIPMENT
and ME SYSTEMS
201.10 Protection against unwanted and excessive radiation HAZARDS
201.11 Protection against excessive temperatures and other HAZARDS
201.12 Accuracy of controls and instruments and protection against
hazardous outputs
201.13 HAZARDOUS SITUATIONS and fault conditions
201.14 PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
(PEMS)
201.15 Construction of ME EQUIPMENT
201.16 ME SYSTEMS
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME
SYSTEMS
201.101 Outlet connector
201.102 Requirements for parts and ACCESSORIES
201.103 SIGNAL INPUT/OUTPUT PART
201.104 Indication of duration of operation
201.105 Integrated CONSERVING EQUIPMENT
202 Medical electrical equipment - Part 1-2: General requirements
for basic safety and essential performance - Collateral
standard: Electromagnetic compatibility - Requirements
and tests
206 Medical electrical equipment - Part 1-6: General requirements
for basic safety and essential performance - Collateral
Standard: Usability
208 Medical electrical equipment - Part 1-8: General requirements
for basic safety and essential performance - Collateral
Standard: General requirements, tests and guidance
for alarm systems in medical electrical equipment and
medical electrical systems
211 Medical electrical equipment - Part 1-11: General requirements
for basic safety and essential performance - Collateral
Standard: Requirements for medical electrical equipment
and medical electrical systems used in the home
healthcare environment
ANNEX C (informative) - Guide to marking and labelling
requirements for ME EQUIPMENT and ME
SYSTEMS
Annex D (informative) - Symbols on marking
Annex AA (informative) - Particular guidance and rationale
Annex BB (informative) - Reference to the Essential Principles
Bibliography
Annex ZA (informative) - Relationship between this
Document and the Essential Requirements
of EU Directive 93/42/EEC
Defines requirements for the BASIC SAFETY and ESSENTIAL PERFORMANCE of an OXYGEN CONCENTRATOR in combination with its ACCESSORIES, hereafter referred to as ME EQUIPMENT, intended to increase the oxygen concentration of gas intended to be delivered to a single PATIENT.
| DevelopmentNote |
Supersedes I.S. EN ISO 8359. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 80601-2-69:2014 | Identical |
| EN ISO 80601-2-69:2014 | Identical |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 80601-2-67:2014 | Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 15986:2011 | Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| CFR 45(PTS1-199) : OCT 2017 | PUBLIC WELFARE - SUBTITLE A - DEPARTMENT OF HEALTH AND HUMAN SERVICES - GENERAL ADMINISTRATION - SUBTITLE B - REGULATIONS RELATING TO PUBLIC WELFARE |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 8835-7:2011 | Inhalational anaesthesia systems — Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases |
| ISO 10083:2006 | Oxygen concentrator supply systems for use with medical gas pipeline systems |
| IEC 60601-1-8:2006+AMD1:2012 CSV | Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| ISO 8185:2007 | Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems |
| ISO/TR 16142:2006 | Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices |
| ISO 14159:2002 | Safety of machinery — Hygiene requirements for the design of machinery |
| ISO 80369-1:2010 | Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| ISO 17664:2017 | Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.