I.S. EN ISO 6158:2011
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES
Hardcopy , PDF
30-06-2019
English
27-07-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser to the processor
5 Designation
6 Requirements
7 Sampling
Annex A (informative) - Typical thickness of chromium specified
in engineering applications
Annex B (normative) - Thickness test methods for electroplated
chromium and other metallic coatings
Annex C (normative) - Determination of cracks and pores in
chromium coatings
Bibliography
Describes requirements for electroplated coatings of hexavalent chromium, with or without undercoats, on ferrous and non-ferrous metals for engineering purposes.
DocumentType |
Standard
|
Pages |
27
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN ISO 6158 : 2011 | Identical |
EN ISO 6158:2011 | Identical |
ONORM EN ISO 6158 : 2011 | Identical |
NEN EN ISO 6158 : 2011 | Identical |
NS EN ISO 6158 : 2011 | Identical |
SN EN ISO 6158 : 2011 | Identical |
BS EN ISO 6158:2011 | Identical |
ISO 6158:2011 | Identical |
UNI EN ISO 6158 : 2011 | Identical |
NBN EN ISO 6158 : 2011 | Identical |
UNE-EN ISO 6158:2012 | Identical |
DIN EN ISO 6158:2011-10 | Identical |
ISO 10309:1994 | Metallic coatings Porosity tests Ferroxyl test |
ISO 4526:2004 | Metallic coatings Electroplated coatings of nickel for engineering purposes |
ISO 9220:1988 | Metallic coatings Measurement of coating thickness Scanning electron microscope method |
ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
ISO 2080:2008 | Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary |
ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
ISO 27830:2008 | Metallic and other inorganic coatings Guidelines for specifying metallic and inorganic coatings |
ISO 3543:2000 | Metallic and non-metallic coatings Measurement of thickness Beta backscatter method |
ISO 27831-1:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
ISO 10587:2000 | Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method |
ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
ISO 27831-2:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys |
ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
ISO 4519:1980 | Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes |
ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 2177:2003 | Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution |
ISO 12686:1999 | Metallic and other inorganic coatings — Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.